[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1464592251-2688-1-git-send-email-pramod.kumar@broadcom.com>
Date: Mon, 30 May 2016 12:40:44 +0530
From: Pramod Kumar <pramod.kumar@...adcom.com>
To: Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Kishon Vijay Abraham I <kishon@...com>,
"David S. Miller" <davem@...emloft.net>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
bcm-kernel-feedback-list@...adcom.com,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
Pramod Kumar <pramod.kumar@...adcom.com>
Subject: [PATCH 0/7] Add MDIO bus multiplexer support for iProc SoCs
Broadcom iProc based SoCs use a MDIO bus multiplexer where child buses
could be internal as well external to SoCs. These buses could supports
MDIO transaction compatible to C-22/C-45.
Broadcom MDIO bus mulitplexer is an integrated multiplexer where child bus
selection and mdio transaction logic lies inside multiplexer itself.
To accommodate this multiplexer in existing mux framework below changes
were required-
1. Passed MDIO parent bus via mdio_mux_init to MDIO mux framework.
2. Defined one new boolean property named "mdio-integrated-mux". Integrated
bus Multiplexer node defines this so when parent bus is registered
by calling "of_mdiobus_register", this api will not scan for child
nodes. Child node of integrated multiplexer will be muxed nodes not
PHYs one hence should not be scanned.
This patch set includes MDIO bus multiplexer driver along with above
framework changes. It includes one external bus node having Ethernet PHY
attached and two internal bus node holding PCIe PHYs.
This patch series is based on v4.6.0-rc1 and is available from github-
repo: https://github.com/Broadcom/arm64-linux.git
branch:mdio-mux-v1
Pramod Kumar (7):
mdio:mux: Enhanced MDIO mux framework for integrated multiplexers
DT: phy.txt: Add mdio-integrated-mux property
binding: mdio-mux: Add DT binding doc for Broadcom MDIO bus mutiplexer
DT:mdio-mux: Add mdio multiplexer driver node
net:mdio-mux: Add MDIO mux driver for iProc SoCs
Binding:PHY: Binding doc for NS2 PCIe PHYs.
phy: Add Northstar2 PCI Phy support
.../bindings/net/brcm,mdio-mux-iproc.txt | 64 +++++
Documentation/devicetree/bindings/net/mdio-mux.txt | 9 +-
.../bindings/phy/brcm,mdio-mux-bus-pci.txt | 27 +++
arch/arm64/boot/dts/broadcom/ns2-svk.dts | 12 +
arch/arm64/boot/dts/broadcom/ns2.dtsi | 32 +++
drivers/net/phy/Kconfig | 11 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/mdio-mux-bcm-iproc.c | 263 +++++++++++++++++++++
drivers/net/phy/mdio-mux-gpio.c | 2 +-
drivers/net/phy/mdio-mux-mmioreg.c | 2 +-
drivers/net/phy/mdio-mux.c | 28 ++-
drivers/of/of_mdio.c | 3 +
drivers/phy/Kconfig | 8 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-bcm-ns2-pcie.c | 115 +++++++++
include/linux/mdio-mux.h | 4 +-
16 files changed, 568 insertions(+), 14 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt
create mode 100644 Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt
create mode 100644 drivers/net/phy/mdio-mux-bcm-iproc.c
create mode 100644 drivers/phy/phy-bcm-ns2-pcie.c
--
1.9.1
Powered by blists - more mailing lists