netdev - [PATCH V4 2/4] net-next: mediatek: fix gigabit and flow control advertisement

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1464941829-38712-3-git-send-email-john@phrozen.org>
Date:	Fri,  3 Jun 2016 10:17:07 +0200
From:	John Crispin <john@...ozen.org>
To:	"David S. Miller" <davem@...emloft.net>
Cc:	Felix Fietkau <nbd@...nwrt.org>, Sean Wang <keyhaede@...il.com>,
	netdev@...r.kernel.org, linux-mediatek@...ts.infradead.org,
	linux-kernel@...r.kernel.org, John Crispin <john@...ozen.org>
Subject: [PATCH V4 2/4] net-next: mediatek: fix gigabit and flow control advertisement

The current code will not setup the PHYs advertisement features correctly.
Fix this and properly advertise Gigabit features and properly handle
asymmetric pause frames.

Signed-off-by: Sean Wang <keyhaede@...il.com>
Signed-off-by: John Crispin <john@...ozen.org>
---
Changes in V4
* set SUPPORTED_Asym_Pause rather than clearing it
* add debug code
* only setup asym if we are in full duplex

 drivers/net/ethernet/mediatek/mtk_eth_soc.c |   30 +++++++++++++++++++++++----
 1 file changed, 26 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 28f169f..b0652f6 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -133,6 +133,8 @@ static int mtk_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg)
 static void mtk_phy_link_adjust(struct net_device *dev)
 {
 	struct mtk_mac *mac = netdev_priv(dev);
+	u16 lcl_adv = 0, rmt_adv = 0;
+	u8 flowctrl;
 	u32 mcr = MAC_MCR_MAX_RX_1536 | MAC_MCR_IPG_CFG |
 		  MAC_MCR_FORCE_MODE | MAC_MCR_TX_EN |
 		  MAC_MCR_RX_EN | MAC_MCR_BACKOFF_EN |
@@ -150,11 +152,30 @@ static void mtk_phy_link_adjust(struct net_device *dev)
 	if (mac->phy_dev->link)
 		mcr |= MAC_MCR_FORCE_LINK;
 
-	if (mac->phy_dev->duplex)
+	if (mac->phy_dev->duplex) {
 		mcr |= MAC_MCR_FORCE_DPX;
 
-	if (mac->phy_dev->pause)
-		mcr |= MAC_MCR_FORCE_RX_FC | MAC_MCR_FORCE_TX_FC;
+		if (mac->phy_dev->pause)
+			rmt_adv = LPA_PAUSE_CAP;
+		if (mac->phy_dev->asym_pause)
+			rmt_adv |= LPA_PAUSE_ASYM;
+
+		if (mac->phy_dev->advertising & ADVERTISED_Pause)
+			lcl_adv |= ADVERTISE_PAUSE_CAP;
+		if (mac->phy_dev->advertising & ADVERTISED_Asym_Pause)
+			lcl_adv |= ADVERTISE_PAUSE_ASYM;
+
+		flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv);
+
+		if (flowctrl & FLOW_CTRL_TX)
+			mcr |= MAC_MCR_FORCE_TX_FC;
+		if (flowctrl & FLOW_CTRL_RX)
+			mcr |= MAC_MCR_FORCE_RX_FC;
+
+		netif_dbg(mac->hw, link, dev, "rx pause %s, tx pause %s\n",
+			  flowctrl & FLOW_CTRL_RX ? "enabled" : "disabled",
+			  flowctrl & FLOW_CTRL_TX ? "enabled" : "disabled");
+	}
 
 	mtk_w32(mac->hw, mcr, MTK_MAC_MCR(mac->id));
 
@@ -236,7 +257,8 @@ static int mtk_phy_connect(struct mtk_mac *mac)
 	mac->phy_dev->autoneg = AUTONEG_ENABLE;
 	mac->phy_dev->speed = 0;
 	mac->phy_dev->duplex = 0;
-	mac->phy_dev->supported &= PHY_BASIC_FEATURES;
+	mac->phy_dev->supported &= PHY_GBIT_FEATURES | SUPPORTED_Pause |
+				   SUPPORTED_Asym_Pause;
 	mac->phy_dev->advertising = mac->phy_dev->supported |
 				    ADVERTISED_Autoneg;
 	phy_start_aneg(mac->phy_dev);
-- 
1.7.10.4