[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <57617ECF.2010902@gmail.com>
Date: Wed, 15 Jun 2016 09:14:07 -0700
From: Florian Fainelli <f.fainelli@...il.com>
To: Grygorii Strashko <grygorii.strashko@...com>,
"David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org,
Sekhar Nori <nsekhar@...com>,
Mugunthan V N <mugunthanvnm@...com>
Cc: linux-kernel@...r.kernel.org, linux-omap@...r.kernel.org,
Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org
Subject: Re: [PATCH 04/15] drivers: net: cpsw: ethtool: fix accessing to
suspended device
On 06/15/2016 04:55 AM, Grygorii Strashko wrote:
> The CPSW might be suspended by RPM if all ethX interfaces are down,
> but it still could be accesible through ethtool interfce. In this case
> ethtool operations, requiring registers access, will cause L3 errors and
> CPSW crash.
>
> Hence, fix it by adding RPM get/put calls in ethtool callbcaks which
> can access CPSW registers: .set_coalesce(), .get_ethtool_stats(),
> .set_pauseparam(), .get_regs()
Provided that you implement an ethtool_ops::begin, it will be called
before each ethtool operation runs, so that could allow you to eliminate
some of the duplication here. Conversely ethtool_ops::end terminates
each operation and can be used for that purpose.
>
> Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
> ---
> drivers/net/ethernet/ti/cpsw.c | 36 +++++++++++++++++++++++++++++++++++-
> 1 file changed, 35 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
> index ba81d4e..1ba0c09 100644
> --- a/drivers/net/ethernet/ti/cpsw.c
> +++ b/drivers/net/ethernet/ti/cpsw.c
> @@ -931,6 +931,13 @@ static int cpsw_set_coalesce(struct net_device *ndev,
> u32 prescale = 0;
> u32 addnl_dvdr = 1;
> u32 coal_intvl = 0;
> + int ret;
> +
> + ret = pm_runtime_get_sync(&priv->pdev->dev);
> + if (ret < 0) {
> + pm_runtime_put_noidle(&priv->pdev->dev);
> + return ret;
> + }
>
> coal_intvl = coal->rx_coalesce_usecs;
>
> @@ -985,6 +992,8 @@ update_return:
> priv->coal_intvl = coal_intvl;
> }
>
> + pm_runtime_put(&priv->pdev->dev);
> +
> return 0;
> }
>
> @@ -1022,7 +1031,13 @@ static void cpsw_get_ethtool_stats(struct net_device *ndev,
> struct cpdma_chan_stats tx_stats;
> u32 val;
> u8 *p;
> - int i;
> + int i, ret;
> +
> + ret = pm_runtime_get_sync(&priv->pdev->dev);
> + if (ret < 0) {
> + pm_runtime_put_noidle(&priv->pdev->dev);
> + return;
> + }
>
> /* Collect Davinci CPDMA stats for Rx and Tx Channel */
> cpdma_chan_get_stats(priv->rxch, &rx_stats);
> @@ -1049,6 +1064,8 @@ static void cpsw_get_ethtool_stats(struct net_device *ndev,
> break;
> }
> }
> +
> + pm_runtime_put(&priv->pdev->dev);
> }
>
> static int cpsw_common_res_usage_state(struct cpsw_priv *priv)
> @@ -1780,11 +1797,20 @@ static void cpsw_get_regs(struct net_device *ndev,
> {
> struct cpsw_priv *priv = netdev_priv(ndev);
> u32 *reg = p;
> + int ret;
> +
> + ret = pm_runtime_get_sync(&priv->pdev->dev);
> + if (ret < 0) {
> + pm_runtime_put_noidle(&priv->pdev->dev);
> + return;
> + }
>
> /* update CPSW IP version */
> regs->version = priv->version;
>
> cpsw_ale_dump(priv->ale, reg);
> +
> + pm_runtime_put(&priv->pdev->dev);
> }
>
> static void cpsw_get_drvinfo(struct net_device *ndev,
> @@ -1902,12 +1928,20 @@ static int cpsw_set_pauseparam(struct net_device *ndev,
> {
> struct cpsw_priv *priv = netdev_priv(ndev);
> bool link;
> + int ret;
> +
> + ret = pm_runtime_get_sync(&priv->pdev->dev);
> + if (ret < 0) {
> + pm_runtime_put_noidle(&priv->pdev->dev);
> + return ret;
> + }
>
> priv->rx_pause = pause->rx_pause ? true : false;
> priv->tx_pause = pause->tx_pause ? true : false;
>
> for_each_slave(priv, _cpsw_adjust_link, priv, &link);
>
> + pm_runtime_put(&priv->pdev->dev);
> return 0;
> }
>
>
--
Florian
Powered by blists - more mailing lists