| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 17 Jun 2016 23:32:14 +0200
From: Philippe Reynes <tremyfr@...il.com>
To: mark.einon@...il.com, davem@...emloft.net, andrew@...n.ch,
mugunthanvnm@...com, felipe.balbi@...ux.intel.com,
f.fainelli@...il.com, fw@...len.de, wuninsu@...il.com
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
Philippe Reynes <tremyfr@...il.com>
Subject: [PATCH 1/2] net: ethernet: et131x: use phydev from struct net_device
The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phydev in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: Philippe Reynes <tremyfr@...il.com>
---
drivers/net/ethernet/agere/et131x.c | 48 +++++++++++++---------------------
1 files changed, 18 insertions(+), 30 deletions(-)
diff --git a/drivers/net/ethernet/agere/et131x.c b/drivers/net/ethernet/agere/et131x.c
index 30defe6..d194992 100644
--- a/drivers/net/ethernet/agere/et131x.c
+++ b/drivers/net/ethernet/agere/et131x.c
@@ -440,7 +440,6 @@ struct et131x_adapter {
struct net_device *netdev;
struct pci_dev *pdev;
struct mii_bus *mii_bus;
- struct phy_device *phydev;
struct napi_struct napi;
/* Flags that indicate current state of the adapter */
@@ -864,7 +863,7 @@ static void et1310_config_mac_regs2(struct et131x_adapter *adapter)
{
int32_t delay = 0;
struct mac_regs __iomem *mac = &adapter->regs->mac;
- struct phy_device *phydev = adapter->phydev;
+ struct phy_device *phydev = adapter->netdev->phydev;
u32 cfg1;
u32 cfg2;
u32 ifctrl;
@@ -1035,7 +1034,7 @@ static void et1310_setup_device_for_unicast(struct et131x_adapter *adapter)
static void et1310_config_rxmac_regs(struct et131x_adapter *adapter)
{
struct rxmac_regs __iomem *rxmac = &adapter->regs->rxmac;
- struct phy_device *phydev = adapter->phydev;
+ struct phy_device *phydev = adapter->netdev->phydev;
u32 sa_lo;
u32 sa_hi = 0;
u32 pf_ctrl = 0;
@@ -1230,7 +1229,7 @@ out:
static int et131x_mii_read(struct et131x_adapter *adapter, u8 reg, u16 *value)
{
- struct phy_device *phydev = adapter->phydev;
+ struct phy_device *phydev = adapter->netdev->phydev;
if (!phydev)
return -EIO;
@@ -1311,7 +1310,7 @@ static void et1310_phy_read_mii_bit(struct et131x_adapter *adapter,
static void et1310_config_flow_control(struct et131x_adapter *adapter)
{
- struct phy_device *phydev = adapter->phydev;
+ struct phy_device *phydev = adapter->netdev->phydev;
if (phydev->duplex == DUPLEX_HALF) {
adapter->flow = FLOW_NONE;
@@ -1456,7 +1455,7 @@ static int et131x_mdio_write(struct mii_bus *bus, int phy_addr,
static void et1310_phy_power_switch(struct et131x_adapter *adapter, bool down)
{
u16 data;
- struct phy_device *phydev = adapter->phydev;
+ struct phy_device *phydev = adapter->netdev->phydev;
et131x_mii_read(adapter, MII_BMCR, &data);
data &= ~BMCR_PDOWN;
@@ -1469,7 +1468,7 @@ static void et1310_phy_power_switch(struct et131x_adapter *adapter, bool down)
static void et131x_xcvr_init(struct et131x_adapter *adapter)
{
u16 lcr2;
- struct phy_device *phydev = adapter->phydev;
+ struct phy_device *phydev = adapter->netdev->phydev;
/* Set the LED behavior such that LED 1 indicates speed (off =
* 10Mbits, blink = 100Mbits, on = 1000Mbits) and LED 2 indicates
@@ -2111,7 +2110,7 @@ static int et131x_init_recv(struct et131x_adapter *adapter)
/* et131x_set_rx_dma_timer - Set the heartbeat timer according to line rate */
static void et131x_set_rx_dma_timer(struct et131x_adapter *adapter)
{
- struct phy_device *phydev = adapter->phydev;
+ struct phy_device *phydev = adapter->netdev->phydev;
/* For version B silicon, we do not use the RxDMA timer for 10 and 100
* Mbits/s line rates. We do not enable and RxDMA interrupt coalescing.
@@ -2426,7 +2425,7 @@ static int nic_send_packet(struct et131x_adapter *adapter, struct tcb *tcb)
struct sk_buff *skb = tcb->skb;
u32 nr_frags = skb_shinfo(skb)->nr_frags + 1;
struct skb_frag_struct *frags = &skb_shinfo(skb)->frags[0];
- struct phy_device *phydev = adapter->phydev;
+ struct phy_device *phydev = adapter->netdev->phydev;
dma_addr_t dma_addr;
struct tx_ring *tx_ring = &adapter->tx_ring;
@@ -2794,17 +2793,13 @@ static void et131x_handle_send_pkts(struct et131x_adapter *adapter)
static int et131x_get_settings(struct net_device *netdev,
struct ethtool_cmd *cmd)
{
- struct et131x_adapter *adapter = netdev_priv(netdev);
-
- return phy_ethtool_gset(adapter->phydev, cmd);
+ return phy_ethtool_gset(netdev->phydev, cmd);
}
static int et131x_set_settings(struct net_device *netdev,
struct ethtool_cmd *cmd)
{
- struct et131x_adapter *adapter = netdev_priv(netdev);
-
- return phy_ethtool_sset(adapter->phydev, cmd);
+ return phy_ethtool_sset(netdev->phydev, cmd);
}
static int et131x_get_regs_len(struct net_device *netdev)
@@ -3098,7 +3093,7 @@ err_out:
static void et131x_error_timer_handler(unsigned long data)
{
struct et131x_adapter *adapter = (struct et131x_adapter *)data;
- struct phy_device *phydev = adapter->phydev;
+ struct phy_device *phydev = adapter->netdev->phydev;
if (et1310_in_phy_coma(adapter)) {
/* Bring the device immediately out of coma, to
@@ -3168,7 +3163,7 @@ static int et131x_adapter_memory_alloc(struct et131x_adapter *adapter)
static void et131x_adjust_link(struct net_device *netdev)
{
struct et131x_adapter *adapter = netdev_priv(netdev);
- struct phy_device *phydev = adapter->phydev;
+ struct phy_device *phydev = netdev->phydev;
if (!phydev)
return;
@@ -3287,7 +3282,6 @@ static int et131x_mii_probe(struct net_device *netdev)
phydev->advertising = phydev->supported;
phydev->autoneg = AUTONEG_ENABLE;
- adapter->phydev = phydev;
phy_attached_info(phydev);
@@ -3323,7 +3317,7 @@ static void et131x_pci_remove(struct pci_dev *pdev)
unregister_netdev(netdev);
netif_napi_del(&adapter->napi);
- phy_disconnect(adapter->phydev);
+ phy_disconnect(netdev->phydev);
mdiobus_unregister(adapter->mii_bus);
mdiobus_free(adapter->mii_bus);
@@ -3338,20 +3332,16 @@ static void et131x_pci_remove(struct pci_dev *pdev)
static void et131x_up(struct net_device *netdev)
{
- struct et131x_adapter *adapter = netdev_priv(netdev);
-
et131x_enable_txrx(netdev);
- phy_start(adapter->phydev);
+ phy_start(netdev->phydev);
}
static void et131x_down(struct net_device *netdev)
{
- struct et131x_adapter *adapter = netdev_priv(netdev);
-
/* Save the timestamp for the TX watchdog, prevent a timeout */
netif_trans_update(netdev);
- phy_stop(adapter->phydev);
+ phy_stop(netdev->phydev);
et131x_disable_txrx(netdev);
}
@@ -3684,12 +3674,10 @@ static int et131x_close(struct net_device *netdev)
static int et131x_ioctl(struct net_device *netdev, struct ifreq *reqbuf,
int cmd)
{
- struct et131x_adapter *adapter = netdev_priv(netdev);
-
- if (!adapter->phydev)
+ if (!netdev->phydev)
return -EINVAL;
- return phy_mii_ioctl(adapter->phydev, reqbuf, cmd);
+ return phy_mii_ioctl(netdev->phydev, reqbuf, cmd);
}
/* et131x_set_packet_filter - Configures the Rx Packet filtering */
@@ -4073,7 +4061,7 @@ out:
return rc;
err_phy_disconnect:
- phy_disconnect(adapter->phydev);
+ phy_disconnect(netdev->phydev);
err_mdio_unregister:
mdiobus_unregister(adapter->mii_bus);
err_mdio_free:
--
1.7.4.4
Powered by blists - more mailing lists