[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1466409630-6268-3-git-send-email-mkl@pengutronix.de>
Date: Mon, 20 Jun 2016 10:00:29 +0200
From: Marc Kleine-Budde <mkl@...gutronix.de>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net, linux-can@...r.kernel.org,
kernel@...gutronix.de, Wolfgang Grandegger <wg@...ndegger.com>,
stable@...r.kernel.org, Marc Kleine-Budde <mkl@...gutronix.de>
Subject: [PATCH 2/3] can: at91_can: RX queue could get stuck at high bus load
From: Wolfgang Grandegger <wg@...ndegger.com>
At high bus load it could happen that "at91_poll()" enters with all RX
message boxes filled up. If then at the end the "quota" is exceeded as
well, "rx_next" will not be reset to the first RX mailbox and hence the
interrupts remain disabled.
Signed-off-by: Wolfgang Grandegger <wg@...ndegger.com>
Tested-by: Amr Bekhit <amrbekhit@...il.com>
Cc: <stable@...r.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@...gutronix.de>
---
drivers/net/can/at91_can.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index 8b3275d7792a..8f5e93cb7975 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -712,9 +712,10 @@ static int at91_poll_rx(struct net_device *dev, int quota)
/* upper group completed, look again in lower */
if (priv->rx_next > get_mb_rx_low_last(priv) &&
- quota > 0 && mb > get_mb_rx_last(priv)) {
+ mb > get_mb_rx_last(priv)) {
priv->rx_next = get_mb_rx_first(priv);
- goto again;
+ if (quota > 0)
+ goto again;
}
return received;
--
2.8.1
Powered by blists - more mailing lists