[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5774F2A6.3020308@mojatatu.com>
Date: Thu, 30 Jun 2016 06:21:26 -0400
From: Jamal Hadi Salim <jhs@...atatu.com>
To: John Fastabend <john.fastabend@...il.com>, brouer@...hat.com
Cc: netdev@...r.kernel.org
Subject: Re: [net-next PATCH 1/2] net: pktgen: support injecting packets for
qdisc testing
On 16-06-29 03:47 PM, John Fastabend wrote:
> Add another xmit_mode to pktgen to allow testing xmit functionality
> of qdiscs. The new mode "queue_xmit" injects packets at
> __dev_queue_xmit() so that qdisc is called.
>
> Signed-off-by: John Fastabend <john.r.fastabend@...el.com>
> ---
> net/core/pktgen.c | 42 ++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 40 insertions(+), 2 deletions(-)
>
> diff --git a/net/core/pktgen.c b/net/core/pktgen.c
> index f74ab9c..4b3d467 100644
> --- a/net/core/pktgen.c
> +++ b/net/core/pktgen.c
> @@ -213,6 +213,7 @@
> /* Xmit modes */
> #define M_START_XMIT 0 /* Default normal TX */
> #define M_NETIF_RECEIVE 1 /* Inject packets into stack */
> +#define M_QUEUE_XMIT 2 /* Inject packet into qdisc */
>
> /* If lock -- protects updating of if_list */
> #define if_lock(t) spin_lock(&(t->if_lock));
> @@ -626,6 +627,8 @@ static int pktgen_if_show(struct seq_file *seq, void *v)
>
> if (pkt_dev->xmit_mode == M_NETIF_RECEIVE)
> seq_puts(seq, " xmit_mode: netif_receive\n");
> + else if (pkt_dev->xmit_mode == M_QUEUE_XMIT)
> + seq_puts(seq, " xmit_mode: xmit_queue\n");
>
> seq_puts(seq, " Flags: ");
>
> @@ -1142,8 +1145,10 @@ static ssize_t pktgen_if_write(struct file *file,
> return len;
>
> i += len;
> - if ((value > 1) && (pkt_dev->xmit_mode == M_START_XMIT) &&
> - (!(pkt_dev->odev->priv_flags & IFF_TX_SKB_SHARING)))
> + if ((value > 1) &&
> + ((pkt_dev->xmit_mode == M_QUEUE_XMIT) ||
> + ((pkt_dev->xmit_mode == M_START_XMIT) &&
> + (!(pkt_dev->odev->priv_flags & IFF_TX_SKB_SHARING)))))
> return -ENOTSUPP;
> pkt_dev->burst = value < 1 ? 1 : value;
> sprintf(pg_result, "OK: burst=%d", pkt_dev->burst);
> @@ -1198,6 +1203,9 @@ static ssize_t pktgen_if_write(struct file *file,
> * at module loading time
> */
> pkt_dev->clone_skb = 0;
> + } else if (strcmp(f, "queue_xmit") == 0) {
> + pkt_dev->xmit_mode = M_QUEUE_XMIT;
> + pkt_dev->last_ok = 1;
> } else {
> sprintf(pg_result,
> "xmit_mode -:%s:- unknown\nAvailable modes: %s",
> @@ -3434,6 +3442,36 @@ static void pktgen_xmit(struct pktgen_dev *pkt_dev)
> #endif
> } while (--burst > 0);
> goto out; /* Skips xmit_mode M_START_XMIT */
> + } else if (pkt_dev->xmit_mode == M_QUEUE_XMIT) {
> + local_bh_disable();
> + atomic_add(burst, &pkt_dev->skb->users);
> +
> + ret = dev_queue_xmit(pkt_dev->skb);
> + switch (ret) {
> + case NET_XMIT_SUCCESS:
> + pkt_dev->sofar++;
> + pkt_dev->seq_num++;
> + pkt_dev->tx_bytes += pkt_dev->last_pkt_size;
> + break;
> + case NET_XMIT_DROP:
> + case NET_XMIT_CN:
> + /* These are all valid return codes for a qdisc but
> + * indicate packets are being dropped or will likely
> + * be dropped soon.
> + */
> + case NETDEV_TX_BUSY:
> + /* qdisc may call dev_hard_start_xmit directly in cases
> + * where no queues exist e.g. loopback device, virtual
> + * devices, etc. In this case we need to handle
> + * NETDEV_TX_ codes.
> + */
> + default:
> + pkt_dev->errors++;
> + net_info_ratelimited("%s xmit error: %d\n",
> + pkt_dev->odevname, ret);
> + break;
> + }
> + goto out;
> }
>
> txq = skb_get_tx_queue(odev, pkt_dev->skb);
>
Acked-by: Jamal Hadi Salim <jhs@...atatu.com>
In travel mode, dont have much cycles right now - but can you review
again:
http://www.spinics.net/lists/netdev/msg359545.html
I think you should disallow clone for example and i wasnt sure if you
covered all error scenarios etc.
cheers,
jamal
Powered by blists - more mailing lists