[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1467373869-22746-3-git-send-email-saeedm@mellanox.com>
Date: Fri, 1 Jul 2016 14:50:55 +0300
From: Saeed Mahameed <saeedm@...lanox.com>
To: "David S. Miller" <davem@...emloft.net>
Cc: netdev@...r.kernel.org, Or Gerlitz <ogerlitz@...lanox.com>,
Hadar Hen-Zion <hadarh@...lanox.com>,
Jiri Pirko <jiri@...lanox.com>,
Andy Gospodarek <gospo@...ulusnetworks.com>,
Jesse Brandeburg <jesse.brandeburg@...el.com>,
John Fastabend <john.r.fastabend@...el.com>,
Saeed Mahameed <saeedm@...lanox.com>
Subject: [PATCH net-next V3 02/16] net/mlx5: E-Switch, Add support for the sriov offloads mode
From: Or Gerlitz <ogerlitz@...lanox.com>
Unlike the legacy mode, here, forwarding rules are not learned by the
driver per events on macs set by VFs/VMs into their vports, but rather
should be programmed by higher-level SW entities.
Saying that, still, in the offloads mode (SRIOV_OFFLOADS), two flow
groups are created by the driver for management (slow path) purposes:
The first group will be used for sending packets over e-switch vports
from the host OS where the e-switch management code runs, to be
received by VFs.
The second group will be used by a miss rule which forwards packets toward
the e-switch manager. Further logic will trap these packets such that
the receiving net-device as seen by the networking stack is the representor
of the vport that sent the packet over the e-switch data-path.
Signed-off-by: Or Gerlitz <ogerlitz@...lanox.com>
Signed-off-by: Saeed Mahameed <saeedm@...lanox.com>
---
drivers/net/ethernet/mellanox/mlx5/core/Makefile | 2 +-
drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 35 +++---
drivers/net/ethernet/mellanox/mlx5/core/eswitch.h | 16 +++
.../ethernet/mellanox/mlx5/core/eswitch_offloads.c | 135 +++++++++++++++++++++
4 files changed, 168 insertions(+), 20 deletions(-)
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Makefile b/drivers/net/ethernet/mellanox/mlx5/core/Makefile
index c4f450f..96f1826 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/Makefile
+++ b/drivers/net/ethernet/mellanox/mlx5/core/Makefile
@@ -5,7 +5,7 @@ mlx5_core-y := main.o cmd.o debugfs.o fw.o eq.o uar.o pagealloc.o \
mad.o transobj.o vport.o sriov.o fs_cmd.o fs_core.o \
fs_counters.o rl.o
-mlx5_core-$(CONFIG_MLX5_CORE_EN) += wq.o eswitch.o \
+mlx5_core-$(CONFIG_MLX5_CORE_EN) += wq.o eswitch.o eswitch_offloads.o \
en_main.o en_fs.o en_ethtool.o en_tx.o en_rx.o \
en_rx_am.o en_txrx.o en_clock.o vxlan.o en_tc.o \
en_arfs.o
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index 8068dde..1fc4cfd 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -40,17 +40,6 @@
#define UPLINK_VPORT 0xFFFF
-#define MLX5_DEBUG_ESWITCH_MASK BIT(3)
-
-#define esw_info(dev, format, ...) \
- pr_info("(%s): E-Switch: " format, (dev)->priv.name, ##__VA_ARGS__)
-
-#define esw_warn(dev, format, ...) \
- pr_warn("(%s): E-Switch: " format, (dev)->priv.name, ##__VA_ARGS__)
-
-#define esw_debug(dev, format, ...) \
- mlx5_core_dbg_mask(dev, MLX5_DEBUG_ESWITCH_MASK, format, ##__VA_ARGS__)
-
enum {
MLX5_ACTION_NONE = 0,
MLX5_ACTION_ADD = 1,
@@ -92,6 +81,9 @@ enum {
MC_ADDR_CHANGE | \
PROMISC_CHANGE)
+int esw_create_offloads_fdb_table(struct mlx5_eswitch *esw, int nvports);
+void esw_destroy_offloads_fdb_table(struct mlx5_eswitch *esw);
+
static int arm_vport_context_events_cmd(struct mlx5_core_dev *dev, u16 vport,
u32 events_mask)
{
@@ -578,7 +570,8 @@ static int esw_add_uc_addr(struct mlx5_eswitch *esw, struct vport_addr *vaddr)
if (err)
goto abort;
- if (esw->fdb_table.fdb) /* SRIOV is enabled: Forward UC MAC to vport */
+ /* SRIOV is enabled: Forward UC MAC to vport */
+ if (esw->fdb_table.fdb && esw->mode == SRIOV_LEGACY)
vaddr->flow_rule = esw_fdb_set_vport_rule(esw, mac, vport);
esw_debug(esw->dev, "\tADDED UC MAC: vport[%d] %pM index:%d fr(%p)\n",
@@ -1543,7 +1536,7 @@ static void esw_disable_vport(struct mlx5_eswitch *esw, int vport_num)
int mlx5_eswitch_enable_sriov(struct mlx5_eswitch *esw, int nvfs, int mode)
{
int err;
- int i;
+ int i, enabled_events;
if (!esw || !MLX5_CAP_GEN(esw->dev, vport_group_manager) ||
MLX5_CAP_GEN(esw->dev, port_type) != MLX5_CAP_PORT_TYPE_ETH)
@@ -1562,18 +1555,19 @@ int mlx5_eswitch_enable_sriov(struct mlx5_eswitch *esw, int nvfs, int mode)
esw_warn(esw->dev, "E-Switch engress ACL is not supported by FW\n");
esw_info(esw->dev, "E-Switch enable SRIOV: nvfs(%d) mode (%d)\n", nvfs, mode);
- if (mode != SRIOV_LEGACY)
- return -EINVAL;
-
esw->mode = mode;
esw_disable_vport(esw, 0);
- err = esw_create_legacy_fdb_table(esw, nvfs + 1);
+ if (mode == SRIOV_LEGACY)
+ err = esw_create_legacy_fdb_table(esw, nvfs + 1);
+ else
+ err = esw_create_offloads_fdb_table(esw, nvfs + 1);
if (err)
goto abort;
+ enabled_events = (mode == SRIOV_LEGACY) ? SRIOV_VPORT_EVENTS : UC_ADDR_CHANGE;
for (i = 0; i <= nvfs; i++)
- esw_enable_vport(esw, i, SRIOV_VPORT_EVENTS);
+ esw_enable_vport(esw, i, enabled_events);
esw_info(esw->dev, "SRIOV enabled: active vports(%d)\n",
esw->enabled_vports);
@@ -1604,7 +1598,10 @@ void mlx5_eswitch_disable_sriov(struct mlx5_eswitch *esw)
if (mc_promisc && mc_promisc->uplink_rule)
mlx5_del_flow_rule(mc_promisc->uplink_rule);
- esw_destroy_legacy_fdb_table(esw);
+ if (esw->mode == SRIOV_LEGACY)
+ esw_destroy_legacy_fdb_table(esw);
+ else
+ esw_destroy_offloads_fdb_table(esw);
esw->mode = SRIOV_NONE;
/* VPORT 0 (PF) must be enabled back with non-sriov configuration */
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h
index 544fbfe..2360180 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h
@@ -140,6 +140,11 @@ struct mlx5_eswitch_fdb {
struct mlx5_flow_group *allmulti_grp;
struct mlx5_flow_group *promisc_grp;
} legacy;
+
+ struct offloads_fdb {
+ struct mlx5_flow_group *send_to_vport_grp;
+ struct mlx5_flow_group *miss_grp;
+ } offloads;
};
};
@@ -188,4 +193,15 @@ int mlx5_eswitch_get_vport_stats(struct mlx5_eswitch *esw,
int vport,
struct ifla_vf_stats *vf_stats);
+#define MLX5_DEBUG_ESWITCH_MASK BIT(3)
+
+#define esw_info(dev, format, ...) \
+ pr_info("(%s): E-Switch: " format, (dev)->priv.name, ##__VA_ARGS__)
+
+#define esw_warn(dev, format, ...) \
+ pr_warn("(%s): E-Switch: " format, (dev)->priv.name, ##__VA_ARGS__)
+
+#define esw_debug(dev, format, ...) \
+ mlx5_core_dbg_mask(dev, MLX5_DEBUG_ESWITCH_MASK, format, ##__VA_ARGS__)
+
#endif /* __MLX5_ESWITCH_H__ */
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
new file mode 100644
index 0000000..c6b28df
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -0,0 +1,135 @@
+/*
+ * Copyright (c) 2016, Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/etherdevice.h>
+#include <linux/mlx5/driver.h>
+#include <linux/mlx5/mlx5_ifc.h>
+#include <linux/mlx5/vport.h>
+#include <linux/mlx5/fs.h>
+#include "mlx5_core.h"
+#include "eswitch.h"
+
+#define MAX_PF_SQ 256
+
+int esw_create_offloads_fdb_table(struct mlx5_eswitch *esw, int nvports)
+{
+ int inlen = MLX5_ST_SZ_BYTES(create_flow_group_in);
+ struct mlx5_core_dev *dev = esw->dev;
+ struct mlx5_flow_namespace *root_ns;
+ struct mlx5_flow_table *fdb = NULL;
+ struct mlx5_flow_group *g;
+ u32 *flow_group_in;
+ void *match_criteria;
+ int table_size, ix, err = 0;
+
+ flow_group_in = mlx5_vzalloc(inlen);
+ if (!flow_group_in)
+ return -ENOMEM;
+
+ root_ns = mlx5_get_flow_namespace(dev, MLX5_FLOW_NAMESPACE_FDB);
+ if (!root_ns) {
+ esw_warn(dev, "Failed to get FDB flow namespace\n");
+ goto ns_err;
+ }
+
+ esw_debug(dev, "Create offloads FDB table, log_max_size(%d)\n",
+ MLX5_CAP_ESW_FLOWTABLE_FDB(dev, log_max_ft_size));
+
+ table_size = nvports + MAX_PF_SQ + 1;
+ fdb = mlx5_create_flow_table(root_ns, 0, table_size, 0);
+ if (IS_ERR(fdb)) {
+ err = PTR_ERR(fdb);
+ esw_warn(dev, "Failed to create FDB Table err %d\n", err);
+ goto fdb_err;
+ }
+ esw->fdb_table.fdb = fdb;
+
+ /* create send-to-vport group */
+ memset(flow_group_in, 0, inlen);
+ MLX5_SET(create_flow_group_in, flow_group_in, match_criteria_enable,
+ MLX5_MATCH_MISC_PARAMETERS);
+
+ match_criteria = MLX5_ADDR_OF(create_flow_group_in, flow_group_in, match_criteria);
+
+ MLX5_SET_TO_ONES(fte_match_param, match_criteria, misc_parameters.source_sqn);
+ MLX5_SET_TO_ONES(fte_match_param, match_criteria, misc_parameters.source_port);
+
+ ix = nvports + MAX_PF_SQ;
+ MLX5_SET(create_flow_group_in, flow_group_in, start_flow_index, 0);
+ MLX5_SET(create_flow_group_in, flow_group_in, end_flow_index, ix - 1);
+
+ g = mlx5_create_flow_group(fdb, flow_group_in);
+ if (IS_ERR(g)) {
+ err = PTR_ERR(g);
+ esw_warn(dev, "Failed to create send-to-vport flow group err(%d)\n", err);
+ goto send_vport_err;
+ }
+ esw->fdb_table.offloads.send_to_vport_grp = g;
+
+ /* create miss group */
+ memset(flow_group_in, 0, inlen);
+ MLX5_SET(create_flow_group_in, flow_group_in, match_criteria_enable, 0);
+
+ MLX5_SET(create_flow_group_in, flow_group_in, start_flow_index, ix);
+ MLX5_SET(create_flow_group_in, flow_group_in, end_flow_index, ix + 1);
+
+ g = mlx5_create_flow_group(fdb, flow_group_in);
+ if (IS_ERR(g)) {
+ err = PTR_ERR(g);
+ esw_warn(dev, "Failed to create miss flow group err(%d)\n", err);
+ goto miss_err;
+ }
+ esw->fdb_table.offloads.miss_grp = g;
+
+ return 0;
+
+miss_err:
+ mlx5_destroy_flow_group(esw->fdb_table.offloads.send_to_vport_grp);
+send_vport_err:
+ mlx5_destroy_flow_table(fdb);
+fdb_err:
+ns_err:
+ kvfree(flow_group_in);
+ return err;
+}
+
+void esw_destroy_offloads_fdb_table(struct mlx5_eswitch *esw)
+{
+ if (!esw->fdb_table.fdb)
+ return;
+
+ esw_debug(esw->dev, "Destroy offloads FDB Table\n");
+ mlx5_destroy_flow_group(esw->fdb_table.offloads.send_to_vport_grp);
+ mlx5_destroy_flow_group(esw->fdb_table.offloads.miss_grp);
+
+ mlx5_destroy_flow_table(esw->fdb_table.fdb);
+}
--
2.8.0
Powered by blists - more mailing lists