| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 14 Jul 2016 15:08:10 +0000
From: "Rosen, Rami" <rami.rosen@...el.com>
To: "Winkler, Tomas" <tomas.winkler@...el.com>,
"Levy, Amir (Jer)" <amir.jer.levy@...el.com>,
"andreas.noever@...il.com" <andreas.noever@...il.com>,
"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
"bhelgaas@...gle.com" <bhelgaas@...gle.com>
CC: "linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
thunderbolt-linux <thunderbolt-linux@...el.com>,
"Westerberg, Mika" <mika.westerberg@...el.com>,
"Rosen, Rami" <rami.rosen@...el.com>
Subject: RE: [PATCH v3 5/8] thunderbolt: Communication with the ICM
(firmware)
Hi Amir,
Here are my 2 cents:
This method always returns true, should be void (unless you will change PDF_ERROR_NOTIFICATION or other pdf values to return false), and likewise its invocation should not check return value.
> +static bool nhi_msg_from_icm_analysis(struct tbt_nhi_ctxt *nhi_ctxt,
> + enum pdf_value pdf,
> + const u8 *msg, u32 msg_len)
> +{
> + /*
> + * preparation for messages that won't be sent,
> + * currently unused in this patch.
> + */
> + bool send_event = true;
> +
> + switch (pdf) {
> + case PDF_ERROR_NOTIFICATION:
> + dev_err(&nhi_ctxt->pdev->dev,
> + "controller id %#x PDF_ERROR_NOTIFICATION %hhu
> msg len %u\n",
> + nhi_ctxt->id, msg[11], msg_len);
> + /* fallthrough */
> + case PDF_WRITE_CONFIGURATION_REGISTERS:
> + /* fallthrough */
> + case PDF_READ_CONFIGURATION_REGISTERS:
> + if (nhi_ctxt->wait_for_icm_resp) {
> + nhi_ctxt->wait_for_icm_resp = false;
> + up(&nhi_ctxt->send_sem);
> + }
> + break;
> +
> + case PDF_FW_TO_SW_RESPONSE:
> + if (nhi_ctxt->wait_for_icm_resp) {
> + nhi_ctxt->wait_for_icm_resp = false;
> + up(&nhi_ctxt->send_sem);
> + }
> + break;
> +
> + default:
> + dev_warn(&nhi_ctxt->pdev->dev,
> + "controller id %#x pdf %u isn't handled/expected\n",
> + nhi_ctxt->id, pdf);
> + break;
> + }
> +
> + return send_event;
> +}
> +
This methods always returns 0, should be void.
> +static int nhi_suspend(struct device *dev) __releases(&nhi_ctxt-
> >send_sem)
> +{
> + struct tbt_nhi_ctxt *nhi_ctxt = pci_get_drvdata(to_pci_dev(dev));
> + void __iomem *rx_reg, *tx_reg;
> + u32 rx_reg_val, tx_reg_val;
> +
> + /* must be after negotiation_events, since messages might be sent
> */
> + nhi_ctxt->d0_exit = true;
> +
> + rx_reg = nhi_ctxt->iobase + REG_RX_OPTIONS_BASE +
> + (TBT_ICM_RING_NUM * REG_OPTS_STEP);
> + rx_reg_val = ioread32(rx_reg) & ~REG_OPTS_E2E_EN;
> + tx_reg = nhi_ctxt->iobase + REG_TX_OPTIONS_BASE +
> + (TBT_ICM_RING_NUM * REG_OPTS_STEP);
> + tx_reg_val = ioread32(tx_reg) & ~REG_OPTS_E2E_EN;
> + /* disable RX flow control */
> + iowrite32(rx_reg_val, rx_reg);
> + /* disable TX flow control */
> + iowrite32(tx_reg_val, tx_reg);
> + /* disable RX ring */
> + iowrite32(rx_reg_val & ~REG_OPTS_VALID, rx_reg);
> +
> + mutex_lock(&nhi_ctxt->d0_exit_mailbox_mutex);
> + mutex_lock(&nhi_ctxt->d0_exit_send_mutex);
> +
> + cancel_work_sync(&nhi_ctxt->icm_msgs_work);
> +
> + if (nhi_ctxt->wait_for_icm_resp) {
> + nhi_ctxt->wait_for_icm_resp = false;
> + nhi_ctxt->ignore_icm_resp = false;
> + /*
> + * if there is response, it is lost, so unlock the send
> + * for the next resume.
> + */
> + up(&nhi_ctxt->send_sem);
> + }
> +
> + mutex_unlock(&nhi_ctxt->d0_exit_send_mutex);
> + mutex_unlock(&nhi_ctxt->d0_exit_mailbox_mutex);
> +
> + /* wait for all TX to finish */
> + usleep_range(5 * USEC_PER_MSEC, 7 * USEC_PER_MSEC);
> +
> + /* disable all interrupts */
> + iowrite32(0, nhi_ctxt->iobase + REG_RING_INTERRUPT_BASE);
> + /* disable TX ring */
> + iowrite32(tx_reg_val & ~REG_OPTS_VALID, tx_reg);
> +
> + return 0;
> +}
> +
This methods also always returns 0, should be void.
> +static int nhi_resume(struct device *dev) __acquires(&nhi_ctxt-
> >send_sem)
> +{
> + dma_addr_t phys;
> + struct tbt_nhi_ctxt *nhi_ctxt = pci_get_drvdata(to_pci_dev(dev));
> + struct tbt_buf_desc *desc;
> + void __iomem *iobase = nhi_ctxt->iobase;
> + void __iomem *reg;
> + int i;
> +
> + if (nhi_ctxt->msix_entries) {
> + iowrite32(ioread32(iobase + REG_DMA_MISC) |
> +
> REG_DMA_MISC_INT_AUTO_CLEAR,
> + iobase + REG_DMA_MISC);
> + /*
> + * Vector #0, which is TX complete to ICM,
> + * isn't been used currently.
> + */
> + nhi_set_int_vec(nhi_ctxt, 0, 1);
> +
> + for (i = 2; i < nhi_ctxt->num_vectors; i++)
> + nhi_set_int_vec(nhi_ctxt, nhi_ctxt->num_paths -
> (i/2),
> + i);
> + }
> +
> + /* configure TX descriptors */
> + for (i = 0, phys = nhi_ctxt->icm_ring_shared_mem_dma_addr;
> + i < TBT_ICM_RING_NUM_TX_BUFS;
> + i++, phys += TBT_ICM_RING_MAX_FRAME_SIZE) {
> + desc = &nhi_ctxt->icm_ring_shared_mem->tx_buf_desc[i];
> + desc->phys = cpu_to_le64(phys);
> + desc->attributes = cpu_to_le32(DESC_ATTR_REQ_STS);
> + }
> + /* configure RX descriptors */
> + for (i = 0;
> + i < TBT_ICM_RING_NUM_RX_BUFS;
> + i++, phys += TBT_ICM_RING_MAX_FRAME_SIZE) {
> + desc = &nhi_ctxt->icm_ring_shared_mem->rx_buf_desc[i];
> + desc->phys = cpu_to_le64(phys);
> + desc->attributes = cpu_to_le32(DESC_ATTR_REQ_STS |
> + DESC_ATTR_INT_EN);
> + }
> +
> + /* configure throttling rate for interrupts */
> + for (i = 0, reg = iobase + REG_INT_THROTTLING_RATE;
> + i < NUM_INT_VECTORS;
> + i++, reg += REG_INT_THROTTLING_RATE_STEP) {
> + iowrite32(USEC_TO_256_NSECS(128), reg);
> + }
> +
> + /* configure TX for ICM ring */
> + reg = iobase + REG_TX_RING_BASE + (TBT_ICM_RING_NUM *
> REG_RING_STEP);
> + phys = nhi_ctxt->icm_ring_shared_mem_dma_addr +
> + offsetof(struct tbt_icm_ring_shared_memory, tx_buf_desc);
> + iowrite32(lower_32_bits(phys), reg + REG_RING_PHYS_LO_OFFSET);
> + iowrite32(upper_32_bits(phys), reg + REG_RING_PHYS_HI_OFFSET);
> + iowrite32((TBT_ICM_RING_NUM_TX_BUFS <<
> REG_RING_SIZE_SHIFT) &
> + REG_RING_SIZE_MASK,
> + reg + REG_RING_SIZE_OFFSET);
> +
> + reg = iobase + REG_TX_OPTIONS_BASE +
> (TBT_ICM_RING_NUM*REG_OPTS_STEP);
> + iowrite32(REG_OPTS_RAW | REG_OPTS_VALID, reg);
> +
> + /* configure RX for ICM ring */
> + reg = iobase + REG_RX_RING_BASE + (TBT_ICM_RING_NUM *
> REG_RING_STEP);
> + phys = nhi_ctxt->icm_ring_shared_mem_dma_addr +
> + offsetof(struct tbt_icm_ring_shared_memory, rx_buf_desc);
> + iowrite32(lower_32_bits(phys), reg + REG_RING_PHYS_LO_OFFSET);
> + iowrite32(upper_32_bits(phys), reg + REG_RING_PHYS_HI_OFFSET);
> + iowrite32(((TBT_ICM_RING_NUM_RX_BUFS <<
> REG_RING_SIZE_SHIFT) &
> + REG_RING_SIZE_MASK) |
> + ((TBT_ICM_RING_MAX_FRAME_SIZE <<
> REG_RING_BUF_SIZE_SHIFT) &
> + REG_RING_BUF_SIZE_MASK),
> + reg + REG_RING_SIZE_OFFSET);
> + iowrite32(((TBT_ICM_RING_NUM_RX_BUFS - 1) <<
> REG_RING_CONS_SHIFT) &
> + REG_RING_CONS_MASK,
> + reg + REG_RING_CONS_PROD_OFFSET);
> +
> + reg = iobase + REG_RX_OPTIONS_BASE +
> (TBT_ICM_RING_NUM*REG_OPTS_STEP);
> + iowrite32(REG_OPTS_RAW | REG_OPTS_VALID, reg);
> +
> + /* enable RX interrupt */
> + RING_INT_ENABLE_RX(iobase, TBT_ICM_RING_NUM, nhi_ctxt-
> >num_paths);
> +
> + if (likely((atomic_read(&subscribers) > 0) &&
> + nhi_nvm_authenticated(nhi_ctxt))) {
> + down(&nhi_ctxt->send_sem);
> + nhi_ctxt->d0_exit = false;
> + mutex_lock(&nhi_ctxt->d0_exit_send_mutex);
> + /*
> + * interrupts are enabled here before send due to
> + * implicit barrier in mutex
> + */
> + nhi_send_driver_ready_command(nhi_ctxt);
> + mutex_unlock(&nhi_ctxt->d0_exit_send_mutex);
> + } else {
> + nhi_ctxt->d0_exit = false;
> + }
> +
> + return 0;
> +}
Regards,
Rami Rosen
Intel Corporation
Powered by blists - more mailing lists