netdev - Re: [PATCH v5] wlcore: spi: add wl18xx support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20160716134227.GA327@rob-hp-laptop>
Date:	Sat, 16 Jul 2016 08:42:27 -0500
From:	Rob Herring <robh@...nel.org>
To:	"Reizer, Eyal" <eyalr@...com>
Cc:	Kalle Valo <kvalo@...eaurora.org>,
	"linux-wireless@...r.kernel.org" <linux-wireless@...r.kernel.org>,
	"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
	"linux-spi@...r.kernel.org" <linux-spi@...r.kernel.org>
Subject: Re: [PATCH v5] wlcore: spi: add wl18xx support

On Sun, Jul 10, 2016 at 08:32:40AM +0000, Reizer, Eyal wrote:
> Add support for using with both wl12xx and wl18xx.
> 
> - all wilink family needs special init command for entering wspi mode.
>   extra clock cycles should be sent after the spi init command while the
>   cs pin is high.
> - Use inverted chip select for sending a dummy 4 bytes command that
>   completes the init stage.
> 
> Signed-off-by: Eyal Reizer <eyalr@...com>
> ---
> v1->v2:update device tree bindings configuration
> v2->v3:revert from manual gpio manipulation. use inverted chip select instead
> for sending the extra init cycle which, achieves the same hardware purpose.
> update device tree bindings docucmentation accordingly
> v3->v4: Remove redundant data form binding documentation and fix chip select
> number mismatch in wl1271 example
> v4->v5: Rebase on top of head of wireless-drivers-next

Please add acks when reposting.

Rob