netdev - Re: [PATCH v2 net-next v2 12/12] net: dsa: mv88e6xxx: add support for DSA ageing time

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <87d1malpcd.fsf@ketchup.mtl.sfl>
Date:	Mon, 18 Jul 2016 15:26:42 -0400
From:	Vivien Didelot <vivien.didelot@...oirfairelinux.com>
To:	Andrew Lunn <andrew@...n.ch>
Cc:	netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
	kernel@...oirfairelinux.com,
	"David S. Miller" <davem@...emloft.net>,
	Florian Fainelli <f.fainelli@...il.com>
Subject: Re: [PATCH v2 net-next v2 12/12] net: dsa: mv88e6xxx: add support for DSA ageing time

Hi Andrew,

Andrew Lunn <andrew@...n.ch> writes:

> This is way too simplistic.
>
> The switchdev call is per port. This manipulates the whole switch. We
> need to somehow handle the difference.
>
> I've not look at the bridge code, but i assume it initially sets each
> port to a long age time, probably 5 minutes. When there is a topology
> change, it enables fast ageing by setting a shorter age time in each
> port. After a while it will return to the default age time. Although
> the switchdev call is per port, i think the age time is a property of
> the bridge, not a port.
>
> For the Marvell devices, we only have a global setting. It will apply
> to all bridges we create on the switch. So if one bridge requests fast
> ageing, we need to apply it to all bridges. We should only go back to
> slow ageing when all bridges are out of fast ageing. That is, we need
> some sort of reference counting.
>
> I'm not sure we have enough information to know why the bridge changed
> the age timing. Did the use change the forwarding delay, or have we
> entered fast ageing? So i think for Marvell devices, we need an
> additional property passed down. Is this a fast or a slow age time?
> We can then determine what is the fastest fast ageing, and the fastest
> slow ageing is, perform reference counting as appropriate, and set the
> global setting as needed.

Nope, the bridge ageing time is not per-port, even though switchdev ops
are per-port by design. This is a switch-wide attribute.

See f55ac58ae64c ("switchdev: add bridge ageing_time attribute") [1]

Rocker and mlxsw implement AGEING_TIME switch-wide too.

[1] https://git.kernel.org/cgit/linux/kernel/git/davem/net.git/commit/?id=f55ac58ae64c

Thanks,

        Vivien