| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1469184946-26309-4-git-send-email-sathya.perla@broadcom.com>
Date: Fri, 22 Jul 2016 06:55:45 -0400
From: Sathya Perla <sathya.perla@...adcom.com>
To: netdev@...r.kernel.org
Subject: [net-next PATCH 3/4] be2net: Avoid unnecessary firmware updates of multicast list
From: Sriharsha Basavapatna <sriharsha.basavapatna@...adcom.com>
Eachtime the ndo_set_rx_mode() routine is called, the driver programs the
multicast list in the adapter without checking if there are any changes to
the list. This leads to a flood of RX_FILTER cmds when a number of vlan
interfaces are configured over the device, as the ndo_ gets
called for each vlan interface. To avoid this, we now use __dev_mc_sync()
and __dev_uc_sync() API, but only to detect if there is a change in the
mc/uc lists. Now that we use this API, the code has to be-designed to
issue these API calls for each invocation of the be_set_rx_mode() call.
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@...adcom.com>
Signed-off-by: Sathya Perla <sathya.perla@...adcom.com>
---
drivers/net/ethernet/emulex/benet/be.h | 2 +
drivers/net/ethernet/emulex/benet/be_main.c | 169 +++++++++++++++++++++-------
2 files changed, 130 insertions(+), 41 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index 4555e04..6868712 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -573,6 +573,8 @@ struct be_adapter {
u32 uc_macs; /* Count of secondary UC MAC programmed */
unsigned long vids[BITS_TO_LONGS(VLAN_N_VID)];
u16 vlans_added;
+ bool update_uc_list;
+ bool update_mc_list;
u32 beacon_state; /* for set_phys_id */
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 27fc1f0..4cf4997 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -1420,8 +1420,8 @@ static int be_vid_config(struct be_adapter *adapter)
u16 num = 0, i = 0;
int status = 0;
- /* No need to further configure vids if in promiscuous mode */
- if (be_in_all_promisc(adapter))
+ /* No need to change the VLAN state if the I/F is in promiscuous */
+ if (adapter->netdev->flags & IFF_PROMISC)
return 0;
if (adapter->vlans_added > be_max_vlans(adapter))
@@ -1483,12 +1483,6 @@ static int be_vlan_rem_vid(struct net_device *netdev, __be16 proto, u16 vid)
return be_vid_config(adapter);
}
-static void be_clear_all_promisc(struct be_adapter *adapter)
-{
- be_cmd_rx_filter(adapter, BE_IF_FLAGS_ALL_PROMISCUOUS, OFF);
- adapter->if_flags &= ~BE_IF_FLAGS_ALL_PROMISCUOUS;
-}
-
static void be_set_all_promisc(struct be_adapter *adapter)
{
be_cmd_rx_filter(adapter, BE_IF_FLAGS_ALL_PROMISCUOUS, ON);
@@ -1507,42 +1501,144 @@ static void be_set_mc_promisc(struct be_adapter *adapter)
adapter->if_flags |= BE_IF_FLAGS_MCAST_PROMISCUOUS;
}
-static void be_set_mc_list(struct be_adapter *adapter)
+static void be_set_uc_promisc(struct be_adapter *adapter)
{
int status;
- status = be_cmd_rx_filter(adapter, BE_IF_FLAGS_MULTICAST, ON);
+ if (adapter->if_flags & BE_IF_FLAGS_PROMISCUOUS)
+ return;
+
+ status = be_cmd_rx_filter(adapter, BE_IF_FLAGS_PROMISCUOUS, ON);
if (!status)
- adapter->if_flags &= ~BE_IF_FLAGS_MCAST_PROMISCUOUS;
- else
+ adapter->if_flags |= BE_IF_FLAGS_PROMISCUOUS;
+}
+
+static void be_clear_uc_promisc(struct be_adapter *adapter)
+{
+ int status;
+
+ if (!(adapter->if_flags & BE_IF_FLAGS_PROMISCUOUS))
+ return;
+
+ status = be_cmd_rx_filter(adapter, BE_IF_FLAGS_PROMISCUOUS, OFF);
+ if (!status)
+ adapter->if_flags &= ~BE_IF_FLAGS_PROMISCUOUS;
+}
+
+/* The below 2 functions are the callback args for __dev_mc_sync/dev_uc_sync().
+ * We use a single callback function for both sync and unsync. We really don't
+ * add/remove addresses through this callback. But, we use it to detect changes
+ * to the uc/mc lists. The entire uc/mc list is programmed in be_set_rx_mode().
+ */
+static int be_uc_list_update(struct net_device *netdev,
+ const unsigned char *addr)
+{
+ struct be_adapter *adapter = netdev_priv(netdev);
+
+ adapter->update_uc_list = true;
+ return 0;
+}
+
+static int be_mc_list_update(struct net_device *netdev,
+ const unsigned char *addr)
+{
+ struct be_adapter *adapter = netdev_priv(netdev);
+
+ adapter->update_mc_list = true;
+ return 0;
+}
+
+static void be_set_mc_list(struct be_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ bool mc_promisc = false;
+ int status;
+
+ __dev_mc_sync(netdev, be_mc_list_update, be_mc_list_update);
+
+ if (netdev->flags & IFF_PROMISC) {
+ adapter->update_mc_list = false;
+ } else if (netdev->flags & IFF_ALLMULTI ||
+ netdev_mc_count(netdev) > be_max_mc(adapter)) {
+ /* Enable multicast promisc if num configured exceeds
+ * what we support
+ */
+ mc_promisc = true;
+ adapter->update_mc_list = false;
+ } else if (adapter->if_flags & BE_IF_FLAGS_MCAST_PROMISCUOUS) {
+ /* Update mc-list unconditionally if the iface was previously
+ * in mc-promisc mode and now is out of that mode.
+ */
+ adapter->update_mc_list = true;
+ }
+
+ if (mc_promisc) {
be_set_mc_promisc(adapter);
+ } else if (adapter->update_mc_list) {
+ status = be_cmd_rx_filter(adapter, BE_IF_FLAGS_MULTICAST, ON);
+ if (!status)
+ adapter->if_flags &= ~BE_IF_FLAGS_MCAST_PROMISCUOUS;
+ else
+ be_set_mc_promisc(adapter);
+
+ adapter->update_mc_list = false;
+ }
+}
+
+static void be_clear_mc_list(struct be_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+
+ __dev_mc_unsync(netdev, NULL);
+ be_cmd_rx_filter(adapter, BE_IF_FLAGS_MULTICAST, OFF);
}
static void be_set_uc_list(struct be_adapter *adapter)
{
+ struct net_device *netdev = adapter->netdev;
struct netdev_hw_addr *ha;
+ bool uc_promisc = false;
int i = 1; /* First slot is claimed by the Primary MAC */
- for (; adapter->uc_macs > 0; adapter->uc_macs--, i++)
- be_cmd_pmac_del(adapter, adapter->if_handle,
- adapter->pmac_id[i], 0);
+ __dev_uc_sync(netdev, be_uc_list_update, be_uc_list_update);
- if (netdev_uc_count(adapter->netdev) > be_max_uc(adapter)) {
- be_set_all_promisc(adapter);
- return;
+ if (netdev->flags & IFF_PROMISC) {
+ adapter->update_uc_list = false;
+ } else if (netdev_uc_count(netdev) > (be_max_uc(adapter) - 1)) {
+ uc_promisc = true;
+ adapter->update_uc_list = false;
+ } else if (adapter->if_flags & BE_IF_FLAGS_PROMISCUOUS) {
+ /* Update uc-list unconditionally if the iface was previously
+ * in uc-promisc mode and now is out of that mode.
+ */
+ adapter->update_uc_list = true;
}
- netdev_for_each_uc_addr(ha, adapter->netdev) {
- adapter->uc_macs++; /* First slot is for Primary MAC */
- be_cmd_pmac_add(adapter, (u8 *)ha->addr, adapter->if_handle,
- &adapter->pmac_id[adapter->uc_macs], 0);
+ if (uc_promisc) {
+ be_set_uc_promisc(adapter);
+ } else if (adapter->update_uc_list) {
+ be_clear_uc_promisc(adapter);
+
+ for (; adapter->uc_macs > 0; adapter->uc_macs--, i++)
+ be_cmd_pmac_del(adapter, adapter->if_handle,
+ adapter->pmac_id[i], 0);
+
+ netdev_for_each_uc_addr(ha, adapter->netdev) {
+ adapter->uc_macs++; /* First slot is for Primary MAC */
+ be_cmd_pmac_add(adapter,
+ (u8 *)ha->addr, adapter->if_handle,
+ &adapter->pmac_id[adapter->uc_macs], 0);
+ }
+ adapter->update_uc_list = false;
}
}
static void be_clear_uc_list(struct be_adapter *adapter)
{
+ struct net_device *netdev = adapter->netdev;
int i;
+ __dev_uc_unsync(netdev, NULL);
for (i = 1; i < (adapter->uc_macs + 1); i++)
be_cmd_pmac_del(adapter, adapter->if_handle,
adapter->pmac_id[i], 0);
@@ -1554,27 +1650,17 @@ static void be_set_rx_mode(struct net_device *netdev)
struct be_adapter *adapter = netdev_priv(netdev);
if (netdev->flags & IFF_PROMISC) {
- be_set_all_promisc(adapter);
- return;
- }
-
- /* Interface was previously in promiscuous mode; disable it */
- if (be_in_all_promisc(adapter)) {
- be_clear_all_promisc(adapter);
- if (adapter->vlans_added)
- be_vid_config(adapter);
- }
-
- /* Enable multicast promisc if num configured exceeds what we support */
- if (netdev->flags & IFF_ALLMULTI ||
- netdev_mc_count(netdev) > be_max_mc(adapter)) {
- be_set_mc_promisc(adapter);
- return;
+ if (!be_in_all_promisc(adapter))
+ be_set_all_promisc(adapter);
+ } else if (be_in_all_promisc(adapter)) {
+ /* We need to re-program the vlan-list or clear
+ * vlan-promisc mode (if needed) when the interface
+ * comes out of promisc mode.
+ */
+ be_vid_config(adapter);
}
- if (netdev_uc_count(netdev) != adapter->uc_macs)
- be_set_uc_list(adapter);
-
+ be_set_uc_list(adapter);
be_set_mc_list(adapter);
}
@@ -3426,6 +3512,7 @@ static void be_disable_if_filters(struct be_adapter *adapter)
adapter->pmac_id[0], 0);
be_clear_uc_list(adapter);
+ be_clear_mc_list(adapter);
/* The IFACE flags are enabled in the open path and cleared
* in the close path. When a VF gets detached from the host and
--
2.4.1
Powered by blists - more mailing lists