[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4304f9b7-a0ab-aee7-fdc7-1fe68cd9b250@gmail.com>
Date: Fri, 22 Jul 2016 11:24:31 -0700
From: Florian Fainelli <f.fainelli@...il.com>
To: Jiri Pirko <jiri@...nulli.us>, netdev@...r.kernel.org
Cc: davem@...emloft.net, yotamg@...lanox.com, eladr@...lanox.com,
idosch@...lanox.com, nogahf@...lanox.com, ogerlitz@...lanox.com,
jhs@...atatu.com, Andrew Lunn <andrew@...n.ch>
Subject: Re: [patch net-next v2 0/9] mlxsw: implement port mirroring offload
On 07/21/2016 03:03 AM, Jiri Pirko wrote:
> From: Jiri Pirko <jiri@...lanox.com>
>
> This patchset introduces tc matchall classifier and its offload
> to Spectrum hardware. In combination with mirred action, defined port mirroring
> setup is offloaded by mlxsw/spectrum driver.
>
> The commands used for creating mirror ports:
>
> # ingress mirroring using matchall
> tc qdisc add dev eth25 handle ffff: ingress
> tc filter add dev eth25 parent ffff: \
> matchall skip_sw \
> action mirred egress mirror \
> dev eth27
>
> # egress mirroring using matchall
> tc qdisc add dev eth25 handle 1: root prio
> tc filter add dev eth25 parent 1: \
> matchall skip_sw \
> action mirred egress mirror \
> dev eth27
Is there any logic that guards against the following cases where the
target device is:
- outside of the switch hardware/cluster (which would imply going
through software)?
- has a downstream speed which is lower than the mirrored device?
this might already be in place for 1), I just could not locate it, thanks!
>
> These patches contain:
> - Resource query implementation
> - Hardware port mirorring support for spectrum.
> - Definition of the matchall traffic classifier.
> - General support for hw-offloading for that classifier.
> - Specific spectrum implementaion for matchall offloading.
>
> ---
> v1->v2:
> - couple of minor style fixes
>
> Jiri Pirko (1):
> net/sched: introduce Match-all classifier
>
> Nogah Frankel (2):
> mlxsw: pci: Add resources query implementation.
> mlxsw: pci: Add max span resources to resources query
>
> Yotam Gigi (6):
> net/sched: Add match-all classifier hw offloading.
> mlxsw: reg: Add Shared Buffer Internal Buffer register
> mlxsw: reg: Add Monitoring Port Analyzer Table register
> mlxsw: reg: Add the Monitoring Port Analyzer register
> net/sched: act_mirred: Add helper inlines to access tcf_mirred info.
> mlxsw: spectrum: Add support in matchall mirror TC offloading
>
> drivers/net/ethernet/mellanox/mlxsw/cmd.h | 32 ++
> drivers/net/ethernet/mellanox/mlxsw/core.c | 10 +-
> drivers/net/ethernet/mellanox/mlxsw/core.h | 11 +-
> drivers/net/ethernet/mellanox/mlxsw/pci.c | 64 +++-
> drivers/net/ethernet/mellanox/mlxsw/reg.h | 162 +++++++++
> drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 465 ++++++++++++++++++++++++-
> drivers/net/ethernet/mellanox/mlxsw/spectrum.h | 44 +++
> drivers/net/ethernet/mellanox/mlxsw/switchx2.c | 1 +
> include/linux/netdevice.h | 2 +
> include/net/pkt_cls.h | 11 +
> include/net/tc_act/tc_mirred.h | 9 +
> include/uapi/linux/pkt_cls.h | 12 +
> net/sched/Kconfig | 10 +
> net/sched/Makefile | 1 +
> net/sched/cls_matchall.c | 318 +++++++++++++++++
> 15 files changed, 1148 insertions(+), 4 deletions(-)
> create mode 100644 net/sched/cls_matchall.c
>
--
Florian
Powered by blists - more mailing lists