Message-ID: <1469653391-3443235-4-git-send-email-tom@herbertland.com>
Date:	Wed, 27 Jul 2016 14:03:11 -0700
From:	Tom Herbert <tom@...bertland.com>
To:	<davem@...emloft.net>, <netdev@...r.kernel.org>
CC:	<kernel-team@...com>, <lancerchao@...com>
Subject: [PATCH net-next 3/3] strparser: Documentation

Signed-off-by: Tom Herbert <tom@...bertland.com>
---
 Documentation/networking/strparser.txt | 147 +++++++++++++++++++++++++++++++++
 1 file changed, 147 insertions(+)
 create mode 100644 Documentation/networking/strparser.txt

diff --git a/Documentation/networking/strparser.txt b/Documentation/networking/strparser.txt
new file mode 100644
index 0000000..abfef72
--- /dev/null
+++ b/Documentation/networking/strparser.txt
@@ -0,0 +1,147 @@
+Stream Parser
+-------------
+
+The stream parser (strparser) is a utility that parses messages of an
+application layer protocol running over a TCP connection. The stream
+parser works in conjunction with an upper layer in the kernel to provide
+kernel support for application layer messages. For instance, Kernel
+Connection Multiplexor (KCM) uses the Stream Parser to parse messages
+using a BPF program.
+
+Interface
+---------
+
+The API includes a context structure, a set of callbacks, utility
+functions, and a data_ready function. The callbacks include
+a parse_msg function that is called to perform parsing (e.g.
+BPF parsing in case of KCM), and a rcv_msg function that is called
+when a full message has been completed.
+
+A stream parser can be instantiated for a TCP connection. This is done
+by:
+
+strp_init(struct strparser *strp, struct sock *csk,
+	  struct strp_callbacks *cb)
+
+strp is a struct of type strparser that is allocated by the upper layer.
+csk is the TCP socket associated with the stream parser. Callbacks are
+called by the stream parser.
+
+Callbacks
+---------
+
+There are four callbacks:
+
+int (*parse_msg)(struct strparser *strp, struct sk_buff *skb);
+
+    parse_msg is called to determine the length of the next message
+    in the stream. The upper layer must implement this function. It
+    should parse the sk_buff as containing the headers for the
+    next application layer messages in the stream.
+
+    The skb->cb in the input skb is a struct strp_rx_msg. Only
+    the offset field is relevant in parse_msg and gives the offset
+    where the message starts in the skb.
+
+    The return values of this function are:
+
+    >0 : indicates length of successfully parsed message
+    0  : indicates more data must be received to parse the message
+    -ESTRPIPE : current message should not be processed by the
+          kernel, return control of the socket to userspace which
+          can proceed to read the messages itself
+    other < 0 : Error is parsing, give control back to userspace
+          assuming that synchronization is lost and the stream
+          is unrecoverable (application expected to close TCP socket)
+
+    In the case that an error is returned (return value is less than
+    zero) the stream parser will set the error on TCP socket and wake
+    it up. If parse_msg returned -ESTRPIPE and the stream parser had
+    previously read some bytes for the current message, then the error
+    set on the attached socket is ENODATA since the stream is
+    unrecoverable in that case.
+
+void (*rcv_msg)(struct strparser *strp, struct sk_buff *skb);
+
+    rcv_msg is called when a full message has been received and
+    is queued. The callee must consume the sk_buff; it can
+    call strp_pause to prevent any further messages from being
+    received in rcv_msg (see strp_pause below). This callback
+    must be set.
+
+    The skb->cb in the input skb is a struct strp_rx_msg. This
+    struct contains two fields: offset and full_len. Offset is
+    where the message starts in the skb, and full_len is the
+    the length of the message. skb->len - offset may be greater
+    then full_len since strparser does not trim the skb.
+
+int (*read_sock_done)(struct strparser *strp, int err);
+
+     read_sock_done is called when the stream parser is done reading
+     the TCP socket. The stream parser may read multiple messages
+     in a loop and this function allows cleanup to occur when existing
+     the loop. If the callback is not set (NULL in strp_init) a
+     default function is used.
+
+void (*abort_parser)(struct strparser *strp, int err);
+
+     This function is called when stream parser encounters an error
+     in parsing. The default function stops the stream parser for the
+     TCP socket and sets the error in the socket. The default function
+     can be changed by setting the callback to non-NULL in strp_init.
+
+data_ready
+----------
+
+strp_tcp_data_ready is the TCP data ready function that can be used with
+the stream parser. When the upper layer attaches the TCP socket it
+can set sk_data_ready to this function (after strp_init). sk_user_data
+must be set to the stream parser structure to use this (container_of
+can be used in the other socket callbacks to get the upper layer
+structure from the stream parser structure).
+
+Functions
+---------
+
+The upper layer uses strp_pause and strp_unpause to flow control the
+stream parser. This is needed for instance when the upper layer can't
+immediately process a received message and has to hold it.
+
+strp_stop is called to completely stop stream parser operations. This
+is called internally when the stream parser encounters an error, and
+it is called from the upper layer when unattaching a TCP socket.
+
+strp_done is called to unattach the stream parser from the TCP socket.
+This must be called after the stream processor has be stopped.
+
+strp_check_rcv is called to check for new messages on the socket. This
+is normally called at initialization of the a stream parser instance
+of after strp_unpause.
+
+Statistics
+----------
+
+Various counters are kept for each stream parser for a TCP socket.
+These are in the strp_stats structure. strp_aggr_stats is a convenience
+structure for accumulating statistics for multiple stream parser
+instances. save_strp_stats and aggregate_strp_stats are helper functions
+to save and aggregate statistics.
+
+Message assembly limits
+-----------------------
+
+The stream parser provide mechanisms to limit the resources consumed by
+message assembly.
+
+A timer is set when assembly starts for a new message. The message
+timeout is taken from rcvtime for the associated TCP socket. If the
+timer fires before assembly completes the stream parser is aborted
+and the ETIMEDOUT error is set on the TCP socket.
+
+Message length is limited to the receive buffer size of the associated
+TCP socket. If the length returned by parse_msg is greater than
+the socket buffer size then the stream parser is aborted with
+EMSGSIZE error set on the TCP socket. Note that this makes the
+maximum size of receive skbuffs for a socket with a stream parser
+to be 2*sk_rcvbuf of the TCP socket.
+
-- 
2.8.0.rc2

Powered by blists - more mailing lists