| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1470250549-10993-9-git-send-email-rvatsavayi@caviumnetworks.com>
Date: Wed, 3 Aug 2016 11:55:39 -0700
From: Raghu Vatsavayi <rvatsavayi@...iumnetworks.com>
To: <davem@...emloft.net>
CC: <netdev@...r.kernel.org>,
Raghu Vatsavayi <rvatsavayi@...iumnetworks.com>,
Derek Chickles <derek.chickles@...iumnetworks.com>,
Satanand Burla <satananda.burla@...iumnetworks.com>,
Felix Manlunas <felix.manlunas@...iumnetworks.com>,
Raghu Vatsavayi <raghu.vatsavayi@...iumnetworks.com>
Subject: [PATCH net-next 08/18] liquidio support for new device cn23xx
This patch adds support for queue manipulation routines
for cn23xx.
Signed-off-by: Derek Chickles <derek.chickles@...iumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@...iumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@...iumnetworks.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@...iumnetworks.com>
---
.../ethernet/cavium/liquidio/cn23xx_pf_device.c | 193 +++++++++++++++++++++
drivers/net/ethernet/cavium/liquidio/lio_main.c | 6 +-
2 files changed, 195 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c b/drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c
index cecf608..67d350f 100644
--- a/drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c
+++ b/drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c
@@ -315,6 +315,52 @@ static void cn23xx_setup_global_mac_regs(struct octeon_device *oct)
(oct, CN23XX_SLI_PKT_MAC_RINFO64(mac_no, pf_num)));
}
+static int cn23xx_reset_io_queues(struct octeon_device *oct)
+{
+ int ret_val = 0;
+ u64 d64 = 0ULL, q_no = 0ULL, srn = 0ULL, ern = 0ULL;
+
+ srn = oct->sriov_info.pf_srn;
+ ern = srn + oct->sriov_info.num_pf_rings;
+
+ /*As per HRM reg description, s/w cant write 0 to ENB. */
+ /*to make the queue off, need to set the RST bit. */
+
+ /* Reset the Enable bit for all the 64 IQs. */
+ for (q_no = srn; q_no < ern; q_no++) {
+ /* set RST bit to 1. This bit applies to both IQ and OQ */
+ d64 = octeon_read_csr64(oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no));
+ d64 = d64 | CN23XX_PKT_INPUT_CTL_RST;
+ octeon_write_csr64(oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no), d64);
+ }
+
+ /*wait until the RST bit is clear or the RST and quite bits are set*/
+ for (q_no = srn; q_no < ern; q_no++) {
+ u64 reg_val = octeon_read_csr64(oct,
+ CN23XX_SLI_IQ_PKT_CONTROL64(q_no));
+ while ((READ_ONCE(reg_val) & CN23XX_PKT_INPUT_CTL_RST) &&
+ !(READ_ONCE(reg_val) & CN23XX_PKT_INPUT_CTL_QUIET)) {
+ WRITE_ONCE(reg_val, octeon_read_csr64(
+ oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no)));
+ }
+ WRITE_ONCE(reg_val, READ_ONCE(reg_val) &
+ ~CN23XX_PKT_INPUT_CTL_RST);
+ octeon_write_csr64(oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no),
+ READ_ONCE(reg_val));
+
+ WRITE_ONCE(reg_val, octeon_read_csr64(
+ oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no)));
+ if (READ_ONCE(reg_val) & CN23XX_PKT_INPUT_CTL_RST) {
+ dev_err(&oct->pci_dev->dev,
+ "clearing the reset failed for qno: %llu\n",
+ q_no);
+ ret_val = -1;
+ }
+ }
+
+ return ret_val;
+}
+
static void cn23xx_pf_setup_global_input_regs(struct octeon_device *oct)
{
u64 q_no = 0ULL, ern, srn = 0ULL, pf_num = 0ULL;
@@ -327,6 +373,8 @@ static void cn23xx_pf_setup_global_input_regs(struct octeon_device *oct)
srn = oct->sriov_info.pf_srn;
ern = srn + oct->sriov_info.num_pf_rings;
+ cn23xx_reset_io_queues(oct);
+
/** Set the MAC_NUM and PVF_NUM in IQ_PKT_CONTROL reg
* for all queues.Only PF can set these bits.
* bits 29:30 indicate the MAC num.
@@ -552,6 +600,148 @@ static void cn23xx_setup_oq_regs(struct octeon_device *oct, u32 oq_no)
reg_val);
}
+static void cn23xx_enable_io_queues(struct octeon_device *oct)
+{
+ u64 q_no = 0, reg_val = 0ULL;
+ s32 srn = 0, ern = 0;
+
+ srn = oct->sriov_info.pf_srn;
+ ern = srn + oct->num_iqs;
+
+ for (q_no = srn; q_no < ern; q_no++) {
+ /* set the corresponding IQ IS_64B bit */
+ if (oct->io_qmask.iq64B & (1ULL << (q_no - srn))) {
+ reg_val = octeon_read_csr64(
+ oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no));
+ reg_val = reg_val | CN23XX_PKT_INPUT_CTL_IS_64B;
+ octeon_write_csr64(
+ oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no), reg_val);
+ }
+
+ /* set the corresponding IQ ENB bit */
+ if (oct->io_qmask.iq & (1ULL << (q_no - srn))) {
+ /* IOQs are in reset by default in PEM2 mode,
+ * clearing reset bit
+ */
+ reg_val = octeon_read_csr64(
+ oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no));
+
+ if (reg_val & CN23XX_PKT_INPUT_CTL_RST) {
+ while (
+ (reg_val & CN23XX_PKT_INPUT_CTL_RST) &&
+ !(reg_val & CN23XX_PKT_INPUT_CTL_QUIET)) {
+ reg_val = octeon_read_csr64(
+ oct,
+ CN23XX_SLI_IQ_PKT_CONTROL64(q_no));
+ }
+ reg_val = reg_val & ~CN23XX_PKT_INPUT_CTL_RST;
+ octeon_write_csr64(
+ oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no),
+ reg_val);
+
+ reg_val = octeon_read_csr64(
+ oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no));
+ if (reg_val & CN23XX_PKT_INPUT_CTL_RST) {
+ dev_err(&oct->pci_dev->dev, "clearing the reset failed for qno: %lld\n",
+ q_no);
+ }
+ }
+ reg_val = octeon_read_csr64(
+ oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no));
+ reg_val = reg_val | CN23XX_PKT_INPUT_CTL_RING_ENB;
+ octeon_write_csr64(
+ oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no), reg_val);
+ }
+ }
+ for (q_no = srn; q_no < ern; q_no++) {
+ u32 reg_val;
+ /* set the corresponding OQ ENB bit */
+ if (oct->io_qmask.oq & (1ULL << (q_no - srn))) {
+ reg_val = octeon_read_csr(
+ oct, CN23XX_SLI_OQ_PKT_CONTROL(q_no));
+ reg_val = reg_val | CN23XX_PKT_OUTPUT_CTL_RING_ENB;
+ octeon_write_csr(oct, CN23XX_SLI_OQ_PKT_CONTROL(q_no),
+ reg_val);
+ }
+ }
+}
+
+static void cn23xx_disable_io_queues(struct octeon_device *oct)
+{
+ int q_no = 0, loop = HZ;
+ u64 d64 = 0ULL;
+ u32 d32 = 0ULL;
+ s32 srn = 0, ern = 0;
+
+ srn = oct->sriov_info.pf_srn;
+ ern = srn + oct->num_iqs;
+
+ /*** Disable Input Queues. ***/
+ for (q_no = srn; q_no < ern; q_no++) {
+ loop = HZ;
+
+ /* start the Reset for a particular ring */
+ WRITE_ONCE(d64, octeon_read_csr64(
+ oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no)));
+ WRITE_ONCE(d64, READ_ONCE(d64) &
+ (~(CN23XX_PKT_INPUT_CTL_RING_ENB)));
+ WRITE_ONCE(d64, READ_ONCE(d64) | CN23XX_PKT_INPUT_CTL_RST);
+ octeon_write_csr64(oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no),
+ READ_ONCE(d64));
+
+ /* Wait until hardware indicates that the particular IQ
+ * is out of reset.
+ */
+ WRITE_ONCE(d64, octeon_read_csr64(
+ oct, CN23XX_SLI_PKT_IOQ_RING_RST));
+ while (!(READ_ONCE(d64) & (0x1ULL << q_no)) && loop--) {
+ WRITE_ONCE(d64, octeon_read_csr64(
+ oct, CN23XX_SLI_PKT_IOQ_RING_RST));
+ schedule_timeout_uninterruptible(1);
+ }
+
+ /* Reset the doorbell register for this Input Queue. */
+ octeon_write_csr(oct, CN23XX_SLI_IQ_DOORBELL(q_no), 0xFFFFFFFF);
+ while (((octeon_read_csr64(
+ oct, CN23XX_SLI_IQ_DOORBELL(q_no))) != 0ULL) &&
+ loop--) {
+ schedule_timeout_uninterruptible(1);
+ }
+ }
+
+ /*** Disable Output Queues. ***/
+ for (q_no = srn; q_no < ern; q_no++) {
+ loop = HZ;
+
+ /* Wait until hardware indicates that the particular IQ
+ * is out of reset.It given that SLI_PKT_RING_RST is
+ * common for both IQs and OQs
+ */
+ WRITE_ONCE(d64, octeon_read_csr64(
+ oct, CN23XX_SLI_PKT_IOQ_RING_RST));
+ while (!(READ_ONCE(d64) & (0x1ULL << q_no)) && loop--) {
+ WRITE_ONCE(d64, octeon_read_csr64(
+ oct, CN23XX_SLI_PKT_IOQ_RING_RST));
+ schedule_timeout_uninterruptible(1);
+ }
+
+ /* Reset the doorbell register for this Output Queue. */
+ octeon_write_csr(oct, CN23XX_SLI_OQ_PKTS_CREDIT(q_no),
+ 0xFFFFFFFF);
+ while (((octeon_read_csr64(
+ oct, CN23XX_SLI_OQ_PKTS_CREDIT(q_no))) != 0ULL) &&
+ loop--) {
+ schedule_timeout_uninterruptible(1);
+ }
+
+ /* clear the SLI_PKT(0..63)_CNTS[CNT] reg value */
+ WRITE_ONCE(d32, octeon_read_csr(
+ oct, CN23XX_SLI_OQ_PKTS_SENT(q_no)));
+ octeon_write_csr(oct, CN23XX_SLI_OQ_PKTS_SENT(q_no),
+ READ_ONCE(d32));
+ }
+}
+
static void cn23xx_reinit_regs(struct octeon_device *oct)
{
u32 i;
@@ -729,6 +919,9 @@ int setup_cn23xx_octeon_pf_device(struct octeon_device *oct)
oct->fn_list.setup_device_regs = cn23xx_setup_pf_device_regs;
oct->fn_list.reinit_regs = cn23xx_reinit_regs;
+ oct->fn_list.enable_io_queues = cn23xx_enable_io_queues;
+ oct->fn_list.disable_io_queues = cn23xx_disable_io_queues;
+
cn23xx_setup_reg_address(oct);
oct->coproc_clock_rate = 1000000ULL * cn23xx_coprocessor_clock(oct);
diff --git a/drivers/net/ethernet/cavium/liquidio/lio_main.c b/drivers/net/ethernet/cavium/liquidio/lio_main.c
index b0a97d2..397ef1d 100644
--- a/drivers/net/ethernet/cavium/liquidio/lio_main.c
+++ b/drivers/net/ethernet/cavium/liquidio/lio_main.c
@@ -2094,10 +2094,8 @@ static inline int setup_io_queues(struct octeon_device *octeon_dev,
droq = octeon_dev->droq[q_no];
napi = &droq->napi;
- dev_dbg(&octeon_dev->pci_dev->dev,
- "netif_napi_add netdev:%llx oct:%llx\n",
- (u64)netdev,
- (u64)octeon_dev);
+ dev_dbg(&octeon_dev->pci_dev->dev, "netif_napi_add netdev:%llx oct:%llx pf_num:%d\n",
+ (u64)netdev, (u64)octeon_dev, octeon_dev->pf_num);
netif_napi_add(netdev, napi, liquidio_napi_poll, 64);
/* designate a CPU for this droq */
--
1.8.3.1
Powered by blists - more mailing lists