[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <7bfc435d-c7d5-60a9-d6e2-ada9effcf190@linaro.org>
Date: Fri, 5 Aug 2016 00:17:19 +0300
From: Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>
To: netdev@...r.kernel.org, mugunthanvnm@...com
Cc: linux-omap@...r.kernel.org, grygorii.strashko@...com,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 0/2] Add ability to configure ethernet h/w shaper
Please, ignore it
It was sent by mistake
On 05.08.16 00:11, Ivan Khoronzhuk wrote:
> These two patches can be used to set per queue bandwidth with ethtool.
> I've create them as logical continuation of patchset from intel,
> that have introduced per-queue setting command month ago for ethtool
> interface
> (http://kernel.opensuse.org/cgit/kernel-source/commit/?h=rpm-4.4.9-36&
> id=feaab26abfffe381fb4c8c10d2762a753d481c6c). Actually I've not tested this
> interface and planning to send it in parallel with
> "net: ethernet: ti: cpsw: add multi-queue support"
> (https://lkml.org/lkml/2016/6/30/603), as it contains only changes to
> ethtool interface.
>
> First patch can be used to set per-channel bandwidth, second to tune
> number of per-channel descriptors. It can solve issues described by
> Schuyler. In case if per-channel bandwidth is equal to maximum
> for every channel, the driver could be switched to priority mode.
>
> Ivan Khoronzhuk (2):
> net: core: ethtool: add per queue bandwidth command
> net: core: ethtool: add ringparam perqueue command
>
> include/linux/ethtool.h | 8 ++
> include/uapi/linux/ethtool.h | 2 +
> net/core/ethtool.c | 206 +++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 216 insertions(+)
>
--
Regards,
Ivan Khoronzhuk
Powered by blists - more mailing lists