lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-ID: <f9d596bd-226b-0faf-bab1-858823f17ee4@intel.com> Date: Tue, 9 Aug 2016 18:10:53 +0300 From: Raanan Avargil <raanan.avargil@...el.com> To: Denis Turischev <denis.turischev@...pulab.co.il>, intel-wired-lan@...ts.osuosl.org, "Brown, Aaron F" <aaron.f.brown@...el.com>, Jeff Kirsher <jeffrey.t.kirsher@...el.com> Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org Subject: Re: [Intel-wired-lan] e1000e: PHY cann't be initialized correctly on some I218 controllers On 8/7/2016 11:56, Denis Turischev wrote: > Hi Raanan, > > On 08/04/2016 07:18 PM, Raanan Avargil wrote: >> It is hard to determine what is exactly the problem here and what causes the -3 error, but this is not the place to perform hw reset and retry to init the phy. > I agree that may be this is not the correct place for hw reset, can you advice about another solution? > > It works, not only for me, for example it helps here: > http://www.linux.org.ru/forum/linux-hardware/10268216 > > Another fact that Windows drivers work fine with the same hw. > > Denis > Hi Denis, More suitable place to retry init the device would be in probe function. However, we haven't seen initialization issues like this on i218. Adding Aaron. @Aaron - have you seen initialization errors on i218 devices? Raanan --------------------------------------------------------------------- Intel Israel (74) Limited This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
Powered by blists - more mailing lists