| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1471467662-18319-1-git-send-email-zajec5@gmail.com>
Date: Wed, 17 Aug 2016 23:00:30 +0200
From: Rafał Miłecki <zajec5@...il.com>
To: "David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org
Cc: Rafał Miłecki <rafal@...ecki.pl>,
Rafał Miłecki <zajec5@...il.com>,
Jon Mason <jon.mason@...adcom.com>,
Arnd Bergmann <arnd@...db.de>,
Florian Fainelli <f.fainelli@...il.com>,
Philippe Reynes <tremyfr@...il.com>,
Felix Fietkau <nbd@...nwrt.org>,
linux-kernel@...r.kernel.org (open list),
linux-wireless@...r.kernel.org (open list:BROADCOM SPECIFIC AMBA DRIVER
(BCMA))
Subject: [PATCH net-next] net: bgmac: support Ethernet core on BCM53573 SoCs
From: Rafał Miłecki <rafal@...ecki.pl>
BCM53573 is a new series of Broadcom's SoCs. It's based on ARM and can
be found in two packages (versions): BCM53573 and BCM47189. It shares
some code with the Northstar family, but also requires some new quirks.
First of all there can be up to 2 Ethernet cores on this SoC. If that is
the case, they are connected to two different switch ports allowing some
more complex/optimized setups. It seems the second unit doesn't come
fully configured and requires some IRQ quirk.
Other than that only the first core is connected to the PHY. For the
second one we have to register fixed PHY (similarly to the Northstar),
otherwise generic PHY driver would get some invalid info.
This has been successfully tested on Tenda AC9 (BCM47189B0).
Signed-off-by: Rafał Miłecki <rafal@...ecki.pl>
---
drivers/net/ethernet/broadcom/bgmac-bcma.c | 19 ++++++++++++++++++-
drivers/net/ethernet/broadcom/bgmac.c | 25 +++++++++++++++++++++++++
drivers/net/ethernet/broadcom/bgmac.h | 19 +++++++++++++++++++
include/linux/bcma/bcma.h | 3 +++
include/linux/bcma/bcma_regs.h | 1 +
5 files changed, 66 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bgmac-bcma.c b/drivers/net/ethernet/broadcom/bgmac-bcma.c
index 9a9745c4..3bc0a04 100644
--- a/drivers/net/ethernet/broadcom/bgmac-bcma.c
+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c
@@ -92,6 +92,7 @@ MODULE_DEVICE_TABLE(bcma, bgmac_bcma_tbl);
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipattach */
static int bgmac_probe(struct bcma_device *core)
{
+ struct bcma_chipinfo *ci = &core->bus->chipinfo;
struct ssb_sprom *sprom = &core->bus->sprom;
struct mii_bus *mii_bus;
struct bgmac *bgmac;
@@ -157,7 +158,8 @@ static int bgmac_probe(struct bcma_device *core)
dev_info(bgmac->dev, "Found PHY addr: %d%s\n", bgmac->phyaddr,
bgmac->phyaddr == BGMAC_PHY_NOREGS ? " (NOREGS)" : "");
- if (!bgmac_is_bcm4707_family(core)) {
+ if (!bgmac_is_bcm4707_family(core) &&
+ !(ci->id == BCMA_CHIP_ID_BCM53573 && core->core_unit == 1)) {
mii_bus = bcma_mdio_mii_register(core, bgmac->phyaddr);
if (!IS_ERR(mii_bus)) {
err = PTR_ERR(mii_bus);
@@ -230,6 +232,21 @@ static int bgmac_probe(struct bcma_device *core)
bgmac->feature_flags |= BGMAC_FEAT_NO_RESET;
bgmac->feature_flags |= BGMAC_FEAT_FORCE_SPEED_2500;
break;
+ case BCMA_CHIP_ID_BCM53573:
+ bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
+ bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK;
+ if (ci->pkg == BCMA_PKG_ID_BCM47189)
+ bgmac->feature_flags |= BGMAC_FEAT_IOST_ATTACHED;
+ if (core->core_unit == 0) {
+ bgmac->feature_flags |= BGMAC_FEAT_CC4_IF_SW_TYPE;
+ if (ci->pkg == BCMA_PKG_ID_BCM47189)
+ bgmac->feature_flags |=
+ BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII;
+ } else if (core->core_unit == 1) {
+ bgmac->feature_flags |= BGMAC_FEAT_IRQ_ID_OOB_6;
+ bgmac->feature_flags |= BGMAC_FEAT_CC7_IF_TYPE_RGMII;
+ }
+ break;
default:
bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK;
diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c
index c4751ec..63ef7235 100644
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -940,6 +940,27 @@ static void bgmac_chip_reset(struct bgmac *bgmac)
bgmac_cco_ctl_maskset(bgmac, 1, ~(BGMAC_CHIPCTL_1_IF_TYPE_MASK |
BGMAC_CHIPCTL_1_SW_TYPE_MASK),
sw_type);
+ } else if (bgmac->feature_flags & BGMAC_FEAT_CC4_IF_SW_TYPE) {
+ u32 sw_type = BGMAC_CHIPCTL_4_IF_TYPE_MII |
+ BGMAC_CHIPCTL_4_SW_TYPE_EPHY;
+ u8 et_swtype = 0;
+ char buf[4];
+
+ if (bcm47xx_nvram_getenv("et_swtype", buf, sizeof(buf)) > 0) {
+ if (kstrtou8(buf, 0, &et_swtype))
+ dev_err(bgmac->dev, "Failed to parse et_swtype (%s)\n",
+ buf);
+ sw_type = (et_swtype & 0x0f) << 12;
+ } else if (bgmac->feature_flags & BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII) {
+ sw_type = BGMAC_CHIPCTL_4_IF_TYPE_RGMII |
+ BGMAC_CHIPCTL_4_SW_TYPE_RGMII;
+ }
+ bgmac_cco_ctl_maskset(bgmac, 4, ~(BGMAC_CHIPCTL_4_IF_TYPE_MASK |
+ BGMAC_CHIPCTL_4_SW_TYPE_MASK),
+ sw_type);
+ } else if (bgmac->feature_flags & BGMAC_FEAT_CC7_IF_TYPE_RGMII) {
+ bgmac_cco_ctl_maskset(bgmac, 7, ~BGMAC_CHIPCTL_7_IF_TYPE_MASK,
+ BGMAC_CHIPCTL_7_IF_TYPE_RGMII);
}
if (iost & BGMAC_BCMA_IOST_ATTACHED && !bgmac->has_robosw)
@@ -1467,6 +1488,10 @@ int bgmac_enet_probe(struct bgmac *info)
*/
bgmac_clk_enable(bgmac, 0);
+ /* This seems to be fixing IRQ by assigning OOB #6 to the core */
+ if (bgmac->feature_flags & BGMAC_FEAT_IRQ_ID_OOB_6)
+ bgmac_idm_write(bgmac, BCMA_OOB_SEL_OUT_A30, 0x86);
+
bgmac_chip_reset(bgmac);
err = bgmac_dma_alloc(bgmac);
diff --git a/drivers/net/ethernet/broadcom/bgmac.h b/drivers/net/ethernet/broadcom/bgmac.h
index 24a2502..80836b4 100644
--- a/drivers/net/ethernet/broadcom/bgmac.h
+++ b/drivers/net/ethernet/broadcom/bgmac.h
@@ -369,6 +369,21 @@
#define BGMAC_CHIPCTL_1_SW_TYPE_RGMII 0x000000C0
#define BGMAC_CHIPCTL_1_RXC_DLL_BYPASS 0x00010000
+#define BGMAC_CHIPCTL_4_IF_TYPE_MASK 0x00003000
+#define BGMAC_CHIPCTL_4_IF_TYPE_RMII 0x00000000
+#define BGMAC_CHIPCTL_4_IF_TYPE_MII 0x00001000
+#define BGMAC_CHIPCTL_4_IF_TYPE_RGMII 0x00002000
+#define BGMAC_CHIPCTL_4_SW_TYPE_MASK 0x0000C000
+#define BGMAC_CHIPCTL_4_SW_TYPE_EPHY 0x00000000
+#define BGMAC_CHIPCTL_4_SW_TYPE_EPHYMII 0x00004000
+#define BGMAC_CHIPCTL_4_SW_TYPE_EPHYRMII 0x00008000
+#define BGMAC_CHIPCTL_4_SW_TYPE_RGMII 0x0000C000
+
+#define BGMAC_CHIPCTL_7_IF_TYPE_MASK 0x000000C0
+#define BGMAC_CHIPCTL_7_IF_TYPE_RMII 0x00000000
+#define BGMAC_CHIPCTL_7_IF_TYPE_MII 0x00000040
+#define BGMAC_CHIPCTL_7_IF_TYPE_RGMII 0x00000080
+
#define BGMAC_WEIGHT 64
#define ETHER_MAX_LEN 1518
@@ -390,6 +405,10 @@
#define BGMAC_FEAT_NO_CLR_MIB BIT(13)
#define BGMAC_FEAT_FORCE_SPEED_2500 BIT(14)
#define BGMAC_FEAT_CMDCFG_SR_REV4 BIT(15)
+#define BGMAC_FEAT_IRQ_ID_OOB_6 BIT(16)
+#define BGMAC_FEAT_CC4_IF_SW_TYPE BIT(17)
+#define BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII BIT(18)
+#define BGMAC_FEAT_CC7_IF_TYPE_RGMII BIT(19)
struct bgmac_slot_info {
union {
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
index 3db25df..8eeedb2 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -205,6 +205,9 @@ struct bcma_host_ops {
#define BCMA_PKG_ID_BCM4709 0
#define BCMA_CHIP_ID_BCM47094 53030
#define BCMA_CHIP_ID_BCM53018 53018
+#define BCMA_CHIP_ID_BCM53573 53573
+#define BCMA_PKG_ID_BCM53573 0
+#define BCMA_PKG_ID_BCM47189 1
/* Board types (on PCI usually equals to the subsystem dev id) */
/* BCM4313 */
diff --git a/include/linux/bcma/bcma_regs.h b/include/linux/bcma/bcma_regs.h
index ebd5c1f..c607fce 100644
--- a/include/linux/bcma/bcma_regs.h
+++ b/include/linux/bcma/bcma_regs.h
@@ -23,6 +23,7 @@
#define BCMA_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */
/* Agent registers (common for every core) */
+#define BCMA_OOB_SEL_OUT_A30 0x0100
#define BCMA_IOCTL 0x0408 /* IO control */
#define BCMA_IOCTL_CLK 0x0001
#define BCMA_IOCTL_FGC 0x0002
--
1.8.4.5
Powered by blists - more mailing lists