[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1471673991-117115-9-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Fri, 19 Aug 2016 23:19:44 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Carolyn Wyborny <carolyn.wyborny@...el.com>,
netdev@...r.kernel.org, nhorman@...hat.com, sassmann@...hat.com,
jogreene@...hat.com, guru.anbalagane@...cle.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 08/15] i40e: Add support for HMC resource and profile for X722
From: Carolyn Wyborny <carolyn.wyborny@...el.com>
This patch adds support for HMC resource and profile cmds for X722
firmware.
Change-ID: Icc332101f38ab15d1bfa167823100eb4f6822f7e
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@...el.com>
Tested-by: Andrew Bowers <andrewx.bowers@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h | 21 +++++++++++++++++++++
drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h | 21 +++++++++++++++++++++
2 files changed, 42 insertions(+)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
index 5c4bf76..67e396b 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
@@ -204,6 +204,9 @@ enum i40e_admin_queue_opc {
i40e_aqc_opc_suspend_port_tx = 0x041B,
i40e_aqc_opc_resume_port_tx = 0x041C,
i40e_aqc_opc_configure_partition_bw = 0x041D,
+ /* hmc */
+ i40e_aqc_opc_query_hmc_resource_profile = 0x0500,
+ i40e_aqc_opc_set_hmc_resource_profile = 0x0501,
/* phy commands*/
i40e_aqc_opc_get_phy_abilities = 0x0600,
@@ -1586,6 +1589,24 @@ struct i40e_aqc_configure_partition_bw_data {
I40E_CHECK_STRUCT_LEN(0x22, i40e_aqc_configure_partition_bw_data);
+/* Get and set the active HMC resource profile and status.
+ * (direct 0x0500) and (direct 0x0501)
+ */
+struct i40e_aq_get_set_hmc_resource_profile {
+ u8 pm_profile;
+ u8 pe_vf_enabled;
+ u8 reserved[14];
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aq_get_set_hmc_resource_profile);
+
+enum i40e_aq_hmc_profile {
+ /* I40E_HMC_PROFILE_NO_CHANGE = 0, reserved */
+ I40E_HMC_PROFILE_DEFAULT = 1,
+ I40E_HMC_PROFILE_FAVOR_VF = 2,
+ I40E_HMC_PROFILE_EQUAL = 3,
+};
+
/* Get PHY Abilities (indirect 0x0600) uses the generic indirect struct */
/* set in param0 for get phy abilities to report qualified modules */
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h
index 0045650..40b0eaf 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h
@@ -204,6 +204,9 @@ enum i40e_admin_queue_opc {
i40e_aqc_opc_suspend_port_tx = 0x041B,
i40e_aqc_opc_resume_port_tx = 0x041C,
i40e_aqc_opc_configure_partition_bw = 0x041D,
+ /* hmc */
+ i40e_aqc_opc_query_hmc_resource_profile = 0x0500,
+ i40e_aqc_opc_set_hmc_resource_profile = 0x0501,
/* phy commands*/
i40e_aqc_opc_get_phy_abilities = 0x0600,
@@ -1583,6 +1586,24 @@ struct i40e_aqc_configure_partition_bw_data {
I40E_CHECK_STRUCT_LEN(0x22, i40e_aqc_configure_partition_bw_data);
+/* Get and set the active HMC resource profile and status.
+ * (direct 0x0500) and (direct 0x0501)
+ */
+struct i40e_aq_get_set_hmc_resource_profile {
+ u8 pm_profile;
+ u8 pe_vf_enabled;
+ u8 reserved[14];
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aq_get_set_hmc_resource_profile);
+
+enum i40e_aq_hmc_profile {
+ /* I40E_HMC_PROFILE_NO_CHANGE = 0, reserved */
+ I40E_HMC_PROFILE_DEFAULT = 1,
+ I40E_HMC_PROFILE_FAVOR_VF = 2,
+ I40E_HMC_PROFILE_EQUAL = 3,
+};
+
/* Get PHY Abilities (indirect 0x0600) uses the generic indirect struct */
/* set in param0 for get phy abilities to report qualified modules */
--
2.7.4
Powered by blists - more mailing lists