[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20160820093538.9707-1-martin.blumenstingl@googlemail.com>
Date: Sat, 20 Aug 2016 11:35:34 +0200
From: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
To: linux-amlogic@...ts.infradead.org, khilman@...libre.com,
carlo@...one.org, mturquette@...libre.com, peppe.cavallaro@...com,
alexandre.torgue@...com
Cc: robh+dt@...nel.org, mark.rutland@....com, catalin.marinas@....com,
will.deacon@....com, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
sboyd@...eaurora.org,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Subject: [PATCH v2 0/4] meson: Meson8b and GXBB DWMAC glue driver
This adds a DWMAC glue driver for the PRG_ETHERNET registers found in
Meson8b and GXBB SoCs. Based on the "old" meson6b-dwmac glue driver
the register layout is completely different.
Thus I introduced a separate driver.
Changes since v1:
- make clkin1 mandatory because the internal mux expects two clocks
(in other words: this makes the driver consistent with how the
hardware actually works)
- expose the MPLL2 clock for use by DT so we can pass it to the ethmac
- added a .remove function to the glue driver which disables and
unprepares the clocks on driver removal
Martin Blumenstingl (4):
net: dt-bindings: Document the new Meson8b and GXBB DWMAC bindings
clk: gxbb: expose MPLL2 clock for use by DT
net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC
ARM64: dts: meson-gxbb: use the new GXBB DWMAC glue driver
.../devicetree/bindings/net/meson-dwmac.txt | 45 ++-
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 8 +-
drivers/clk/meson/gxbb.h | 2 +-
drivers/net/ethernet/stmicro/stmmac/Makefile | 2 +-
.../net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 329 +++++++++++++++++++++
include/dt-bindings/clock/gxbb-clkc.h | 1 +
6 files changed, 374 insertions(+), 13 deletions(-)
create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
--
2.9.3
Powered by blists - more mailing lists