| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1471823044-5165-4-git-send-email-vidya@cumulusnetworks.com>
Date: Sun, 21 Aug 2016 16:44:03 -0700
From: Vidya Sagar Ravipati <vidya@...ulusnetworks.com>
To: linville@...driver.com, netdev@...r.kernel.org,
davem@...emloft.net, decot@...glers.com
Cc: bkenward@...arflare.com, daniel@...earbox.net, galp@...lanox.com,
roopa@...ulusnetworks.com, gospo@...ulusnetworks.com,
dustin@...ulusnetworks.com, ben@...adent.org.uk
Subject: [ethtool PATCH v3 3/4] ethtool:QSFP Plus/QSFP28 Diagnostics Information Support
From: Vidya Sagar Ravipati <vidya@...ulusnetworks.com>
This patch provides following support
a) Support for diagnostics information for QSFP Plus/QSFP28 modules
based on SFF-8436/SFF-8636
Standards for QSFP+/QSFP28
a) QSFP+/QSFP28 - SFF 8636 Rev 2.7 dated January 26,2016
b) SFF-8024 Rev 4.0 dated May 31, 2016
Signed-off-by: Vidya Sagar Ravipati <vidya@...ulusnetworks.com>
Acked-by: Bert Kenward <bkenward@...arflare.com>
---
Makefile.am | 2 +-
ethtool.c | 5 +
internal.h | 3 +
qsfp.c | 788 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
qsfp.h | 595 +++++++++++++++++++++++++++++++++++++++++++++
5 files changed, 1392 insertions(+), 1 deletion(-)
create mode 100644 qsfp.c
create mode 100644 qsfp.h
diff --git a/Makefile.am b/Makefile.am
index 6814bc9..1f3d767 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -13,7 +13,7 @@ ethtool_SOURCES += \
fec_8xx.c ibm_emac.c ixgb.c ixgbe.c natsemi.c \
pcnet32.c realtek.c tg3.c marvell.c vioc.c \
smsc911x.c at76c50x-usb.c sfc.c stmmac.c \
- sfpid.c sfpdiag.c ixgbevf.c tse.c vmxnet3.c
+ sff-common.c sfpid.c sfpdiag.c ixgbevf.c tse.c vmxnet3.c qsfp.c
endif
TESTS = test-cmdline test-features
diff --git a/ethtool.c b/ethtool.c
index 4aa4762..1d6564e 100644
--- a/ethtool.c
+++ b/ethtool.c
@@ -4353,6 +4353,11 @@ static int do_getmodule(struct cmd_context *ctx)
sff8079_show_all(eeprom->data);
sff8472_show_all(eeprom->data);
break;
+ case ETH_MODULE_SFF_8436:
+ case ETH_MODULE_SFF_8636:
+ sff8636_show_all(eeprom->data,
+ modinfo.eeprom_len);
+ break;
#endif
default:
geeprom_dump_hex = 1;
diff --git a/internal.h b/internal.h
index ef27ab2..3c08b74 100644
--- a/internal.h
+++ b/internal.h
@@ -345,4 +345,7 @@ void sff8079_show_all(const __u8 *id);
/* Optics diagnostics */
void sff8472_show_all(const __u8 *id);
+/* QSFP Optics diagnostics */
+void sff8636_show_all(const __u8 *id, __u32 eeprom_len);
+
#endif /* ETHTOOL_INTERNAL_H__ */
diff --git a/qsfp.c b/qsfp.c
new file mode 100644
index 0000000..213802e
--- /dev/null
+++ b/qsfp.c
@@ -0,0 +1,788 @@
+/*
+ * qsfp.c: Implements SFF-8636 based QSFP+/QSFP28 Diagnostics Memory map.
+ *
+ * Copyright 2010 Solarflare Communications Inc.
+ * Aurelien Guillaume <aurelien@....me> (C) 2012
+ * Copyright (C) 2014 Cumulus networks Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Freeoftware Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Vidya Ravipati <vidya@...ulusnetworks.com>
+ * This implementation is loosely based on current SFP parser
+ * and SFF-8636 spec Rev 2.7 (ftp://ftp.seagate.com/pub/sff/SFF-8636.PDF)
+ * by SFF Committee.
+ */
+
+/*
+ * Description:
+ * a) The register/memory layout is up to 5 128 byte pages defined by
+ * a "pages valid" register and switched via a "page select"
+ * register. Memory of 256 bytes can be memory mapped at a time
+ * according to SFF 8636.
+ * b) SFF 8636 based 640 bytes memory layout is presented for parser
+ *
+ * SFF 8636 based QSFP Memory Map
+ *
+ * 2-Wire Serial Address: 1010000x
+ *
+ * Lower Page 00h (128 bytes)
+ * ======================
+ * | |
+ * |Page Select Byte(127)|
+ * ======================
+ * |
+ * V
+ * ----------------------------------------
+ * | | | |
+ * V V V V
+ * ---------- ---------- --------- ------------
+ * | Upper | | Upper | | Upper | | Upper |
+ * | Page 00h | | Page 01h | | Page 02h | | Page 03h |
+ * | | |(Optional)| |(Optional)| | (Optional) |
+ * | | | | | | | |
+ * | | | | | | | |
+ * | ID | | AST | | User | | For |
+ * | Fields | | Table | | EEPROM | | Cable |
+ * | | | | | Data | | Assemblies |
+ * | | | | | | | |
+ * | | | | | | | |
+ * ----------- ----------- ---------- --------------
+ *
+ *
+ **/
+#include <stdio.h>
+#include <math.h>
+#include "internal.h"
+#include "sff-common.h"
+#include "qsfp.h"
+
+#define MAX_DESC_SIZE 42
+
+static struct sff8636_aw_flags {
+ const char *str; /* Human-readable string, null at the end */
+ int offset; /* A2-relative address offset */
+ __u8 value; /* Alarm is on if (offset & value) != 0. */
+} sff8636_aw_flags[] = {
+ { "Laser bias current high alarm (Chan 1)",
+ SFF8636_TX_BIAS_12_AW_OFFSET, (SFF8636_TX_BIAS_1_HALARM) },
+ { "Laser bias current low alarm (Chan 1)",
+ SFF8636_TX_BIAS_12_AW_OFFSET, (SFF8636_TX_BIAS_1_LALARM) },
+ { "Laser bias current high warning (Chan 1)",
+ SFF8636_TX_BIAS_12_AW_OFFSET, (SFF8636_TX_BIAS_1_HWARN) },
+ { "Laser bias current low warning (Chan 1)",
+ SFF8636_TX_BIAS_12_AW_OFFSET, (SFF8636_TX_BIAS_1_LWARN) },
+
+ { "Laser bias current high alarm (Chan 2)",
+ SFF8636_TX_BIAS_12_AW_OFFSET, (SFF8636_TX_BIAS_2_HALARM) },
+ { "Laser bias current low alarm (Chan 2)",
+ SFF8636_TX_BIAS_12_AW_OFFSET, (SFF8636_TX_BIAS_2_LALARM) },
+ { "Laser bias current high warning (Chan 2)",
+ SFF8636_TX_BIAS_12_AW_OFFSET, (SFF8636_TX_BIAS_2_HWARN) },
+ { "Laser bias current low warning (Chan 2)",
+ SFF8636_TX_BIAS_12_AW_OFFSET, (SFF8636_TX_BIAS_2_LWARN) },
+
+ { "Laser bias current high alarm (Chan 3)",
+ SFF8636_TX_BIAS_34_AW_OFFSET, (SFF8636_TX_BIAS_3_HALARM) },
+ { "Laser bias current low alarm (Chan 3)",
+ SFF8636_TX_BIAS_34_AW_OFFSET, (SFF8636_TX_BIAS_3_LALARM) },
+ { "Laser bias current high warning (Chan 3)",
+ SFF8636_TX_BIAS_34_AW_OFFSET, (SFF8636_TX_BIAS_3_HWARN) },
+ { "Laser bias current low warning (Chan 3)",
+ SFF8636_TX_BIAS_34_AW_OFFSET, (SFF8636_TX_BIAS_3_LWARN) },
+
+ { "Laser bias current high alarm (Chan 4)",
+ SFF8636_TX_BIAS_34_AW_OFFSET, (SFF8636_TX_BIAS_4_HALARM) },
+ { "Laser bias current low alarm (Chan 4)",
+ SFF8636_TX_BIAS_34_AW_OFFSET, (SFF8636_TX_BIAS_4_LALARM) },
+ { "Laser bias current high warning (Chan 4)",
+ SFF8636_TX_BIAS_34_AW_OFFSET, (SFF8636_TX_BIAS_4_HWARN) },
+ { "Laser bias current low warning (Chan 4)",
+ SFF8636_TX_BIAS_34_AW_OFFSET, (SFF8636_TX_BIAS_4_LWARN) },
+
+ { "Module temperature high alarm",
+ SFF8636_TEMP_AW_OFFSET, (SFF8636_TEMP_HALARM_STATUS) },
+ { "Module temperature low alarm",
+ SFF8636_TEMP_AW_OFFSET, (SFF8636_TEMP_LALARM_STATUS) },
+ { "Module temperature high warning",
+ SFF8636_TEMP_AW_OFFSET, (SFF8636_TEMP_HWARN_STATUS) },
+ { "Module temperature low warning",
+ SFF8636_TEMP_AW_OFFSET, (SFF8636_TEMP_LWARN_STATUS) },
+
+ { "Module voltage high alarm",
+ SFF8636_VCC_AW_OFFSET, (SFF8636_VCC_HALARM_STATUS) },
+ { "Module voltage low alarm",
+ SFF8636_VCC_AW_OFFSET, (SFF8636_VCC_LALARM_STATUS) },
+ { "Module voltage high warning",
+ SFF8636_VCC_AW_OFFSET, (SFF8636_VCC_HWARN_STATUS) },
+ { "Module voltage low warning",
+ SFF8636_VCC_AW_OFFSET, (SFF8636_VCC_LWARN_STATUS) },
+
+ { "Laser tx power high alarm (Channel 1)",
+ SFF8636_TX_PWR_12_AW_OFFSET, (SFF8636_TX_PWR_1_HALARM) },
+ { "Laser tx power low alarm (Channel 1)",
+ SFF8636_TX_PWR_12_AW_OFFSET, (SFF8636_TX_PWR_1_LALARM) },
+ { "Laser tx power high warning (Channel 1)",
+ SFF8636_TX_PWR_12_AW_OFFSET, (SFF8636_TX_PWR_1_HWARN) },
+ { "Laser tx power low warning (Channel 1)",
+ SFF8636_TX_PWR_12_AW_OFFSET, (SFF8636_TX_PWR_1_LWARN) },
+
+ { "Laser tx power high alarm (Channel 2)",
+ SFF8636_TX_PWR_12_AW_OFFSET, (SFF8636_TX_PWR_2_HALARM) },
+ { "Laser tx power low alarm (Channel 2)",
+ SFF8636_TX_PWR_12_AW_OFFSET, (SFF8636_TX_PWR_2_LALARM) },
+ { "Laser tx power high warning (Channel 2)",
+ SFF8636_TX_PWR_12_AW_OFFSET, (SFF8636_TX_PWR_2_HWARN) },
+ { "Laser tx power low warning (Channel 2)",
+ SFF8636_TX_PWR_12_AW_OFFSET, (SFF8636_TX_PWR_2_LWARN) },
+
+ { "Laser tx power high alarm (Channel 3)",
+ SFF8636_TX_PWR_34_AW_OFFSET, (SFF8636_TX_PWR_3_HALARM) },
+ { "Laser tx power low alarm (Channel 3)",
+ SFF8636_TX_PWR_34_AW_OFFSET, (SFF8636_TX_PWR_3_LALARM) },
+ { "Laser tx power high warning (Channel 3)",
+ SFF8636_TX_PWR_34_AW_OFFSET, (SFF8636_TX_PWR_3_HWARN) },
+ { "Laser tx power low warning (Channel 3)",
+ SFF8636_TX_PWR_34_AW_OFFSET, (SFF8636_TX_PWR_3_LWARN) },
+
+ { "Laser tx power high alarm (Channel 4)",
+ SFF8636_TX_PWR_34_AW_OFFSET, (SFF8636_TX_PWR_4_HALARM) },
+ { "Laser tx power low alarm (Channel 4)",
+ SFF8636_TX_PWR_34_AW_OFFSET, (SFF8636_TX_PWR_4_LALARM) },
+ { "Laser tx power high warning (Channel 4)",
+ SFF8636_TX_PWR_34_AW_OFFSET, (SFF8636_TX_PWR_4_HWARN) },
+ { "Laser tx power low warning (Channel 4)",
+ SFF8636_TX_PWR_34_AW_OFFSET, (SFF8636_TX_PWR_4_LWARN) },
+
+ { "Laser rx power high alarm (Channel 1)",
+ SFF8636_RX_PWR_12_AW_OFFSET, (SFF8636_RX_PWR_1_HALARM) },
+ { "Laser rx power low alarm (Channel 1)",
+ SFF8636_RX_PWR_12_AW_OFFSET, (SFF8636_RX_PWR_1_LALARM) },
+ { "Laser rx power high warning (Channel 1)",
+ SFF8636_RX_PWR_12_AW_OFFSET, (SFF8636_RX_PWR_1_HWARN) },
+ { "Laser rx power low warning (Channel 1)",
+ SFF8636_RX_PWR_12_AW_OFFSET, (SFF8636_RX_PWR_1_LWARN) },
+
+ { "Laser rx power high alarm (Channel 2)",
+ SFF8636_RX_PWR_12_AW_OFFSET, (SFF8636_RX_PWR_2_HALARM) },
+ { "Laser rx power low alarm (Channel 2)",
+ SFF8636_RX_PWR_12_AW_OFFSET, (SFF8636_RX_PWR_2_LALARM) },
+ { "Laser rx power high warning (Channel 2)",
+ SFF8636_RX_PWR_12_AW_OFFSET, (SFF8636_RX_PWR_2_HWARN) },
+ { "Laser rx power low warning (Channel 2)",
+ SFF8636_RX_PWR_12_AW_OFFSET, (SFF8636_RX_PWR_2_LWARN) },
+
+ { "Laser rx power high alarm (Channel 3)",
+ SFF8636_RX_PWR_34_AW_OFFSET, (SFF8636_RX_PWR_3_HALARM) },
+ { "Laser rx power low alarm (Channel 3)",
+ SFF8636_RX_PWR_34_AW_OFFSET, (SFF8636_RX_PWR_3_LALARM) },
+ { "Laser rx power high warning (Channel 3)",
+ SFF8636_RX_PWR_34_AW_OFFSET, (SFF8636_RX_PWR_3_HWARN) },
+ { "Laser rx power low warning (Channel 3)",
+ SFF8636_RX_PWR_34_AW_OFFSET, (SFF8636_RX_PWR_3_LWARN) },
+
+ { "Laser rx power high alarm (Channel 4)",
+ SFF8636_RX_PWR_34_AW_OFFSET, (SFF8636_RX_PWR_4_HALARM) },
+ { "Laser rx power low alarm (Channel 4)",
+ SFF8636_RX_PWR_34_AW_OFFSET, (SFF8636_RX_PWR_4_LALARM) },
+ { "Laser rx power high warning (Channel 4)",
+ SFF8636_RX_PWR_34_AW_OFFSET, (SFF8636_RX_PWR_4_HWARN) },
+ { "Laser rx power low warning (Channel 4)",
+ SFF8636_RX_PWR_34_AW_OFFSET, (SFF8636_RX_PWR_4_LWARN) },
+
+ { NULL, 0, 0 },
+};
+
+static void sff8636_show_identifier(const __u8 *id)
+{
+ sff8024_show_identifier(id, SFF8636_ID_OFFSET);
+}
+
+static void sff8636_show_ext_identifier(const __u8 *id)
+{
+ printf("\t%-41s : 0x%02x\n", "Extended identifier",
+ id[SFF8636_EXT_ID_OFFSET]);
+
+ static const char *pfx =
+ "\tExtended identifier description :";
+
+ switch (id[SFF8636_EXT_ID_OFFSET] & SFF8636_EXT_ID_PWR_CLASS_MASK) {
+ case SFF8636_EXT_ID_PWR_CLASS_1:
+ printf("%s 1.5W max. Power consumption\n", pfx);
+ break;
+ case SFF8636_EXT_ID_PWR_CLASS_2:
+ printf("%s 2.0W max. Power consumption\n", pfx);
+ break;
+ case SFF8636_EXT_ID_PWR_CLASS_3:
+ printf("%s 2.5W max. Power consumption\n", pfx);
+ break;
+ case SFF8636_EXT_ID_PWR_CLASS_4:
+ printf("%s 3.5W max. Power consumption\n", pfx);
+ break;
+ }
+
+ if (id[SFF8636_EXT_ID_OFFSET] & SFF8636_EXT_ID_CDR_TX_MASK)
+ printf("%s CDR present in TX,", pfx);
+ else
+ printf("%s No CDR in TX,", pfx);
+
+ if (id[SFF8636_EXT_ID_OFFSET] & SFF8636_EXT_ID_CDR_RX_MASK)
+ printf(" CDR present in RX\n");
+ else
+ printf(" No CDR in RX\n");
+
+ switch (id[SFF8636_EXT_ID_OFFSET] & SFF8636_EXT_ID_EPWR_CLASS_MASK) {
+ case SFF8636_EXT_ID_PWR_CLASS_LEGACY:
+ printf("%s", pfx);
+ break;
+ case SFF8636_EXT_ID_PWR_CLASS_5:
+ printf("%s 4.0W max. Power consumption,", pfx);
+ break;
+ case SFF8636_EXT_ID_PWR_CLASS_6:
+ printf("%s 4.5W max. Power consumption, ", pfx);
+ break;
+ case SFF8636_EXT_ID_PWR_CLASS_7:
+ printf("%s 5.0W max. Power consumption, ", pfx);
+ break;
+ }
+ if (id[SFF8636_PWR_MODE_OFFSET] & SFF8636_HIGH_PWR_ENABLE)
+ printf(" High Power Class (> 3.5 W) enabled\n");
+ else
+ printf(" High Power Class (> 3.5 W) not enabled\n");
+}
+
+static void sff8636_show_connector(const __u8 *id)
+{
+ sff8024_show_connector(id, SFF8636_CTOR_OFFSET);
+}
+
+static void sff8636_show_transceiver(const __u8 *id)
+{
+ static const char *pfx =
+ "\tTransceiver type :";
+
+ printf("\t%-41s : 0x%02x 0x%02x 0x%02x " \
+ "0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n",
+ "Transceiver codes",
+ id[SFF8636_ETHERNET_COMP_OFFSET],
+ id[SFF8636_SONET_COMP_OFFSET],
+ id[SFF8636_SAS_COMP_OFFSET],
+ id[SFF8636_GIGE_COMP_OFFSET],
+ id[SFF8636_FC_LEN_OFFSET],
+ id[SFF8636_FC_TECH_OFFSET],
+ id[SFF8636_FC_TRANS_MEDIA_OFFSET],
+ id[SFF8636_FC_SPEED_OFFSET]);
+
+ /* 10G/40G Ethernet Compliance Codes */
+ if (id[SFF8636_ETHERNET_COMP_OFFSET] & SFF8636_ETHERNET_10G_LRM)
+ printf("%s 10G Ethernet: 10G Base-LRM\n", pfx);
+ if (id[SFF8636_ETHERNET_COMP_OFFSET] & SFF8636_ETHERNET_10G_LR)
+ printf("%s 10G Ethernet: 10G Base-LR\n", pfx);
+ if (id[SFF8636_ETHERNET_COMP_OFFSET] & SFF8636_ETHERNET_10G_SR)
+ printf("%s 10G Ethernet: 10G Base-SR\n", pfx);
+ if (id[SFF8636_ETHERNET_COMP_OFFSET] & SFF8636_ETHERNET_40G_CR4)
+ printf("%s 40G Ethernet: 40G Base-CR4\n", pfx);
+ if (id[SFF8636_ETHERNET_COMP_OFFSET] & SFF8636_ETHERNET_40G_SR4)
+ printf("%s 40G Ethernet: 40G Base-SR4\n", pfx);
+ if (id[SFF8636_ETHERNET_COMP_OFFSET] & SFF8636_ETHERNET_40G_LR4)
+ printf("%s 40G Ethernet: 40G Base-LR4\n", pfx);
+ if (id[SFF8636_ETHERNET_COMP_OFFSET] & SFF8636_ETHERNET_40G_ACTIVE)
+ printf("%s 40G Ethernet: 40G Active Cable (XLPPI)\n", pfx);
+ /* Extended Specification Compliance Codes from SFF-8024 */
+ if (id[SFF8636_ETHERNET_COMP_OFFSET] & SFF8636_ETHERNET_RSRVD) {
+ switch (id[SFF8636_OPTION_1_OFFSET]) {
+ case SFF8636_ETHERNET_UNSPECIFIED:
+ printf("%s (reserved or unknown)\n", pfx);
+ break;
+ case SFF8636_ETHERNET_100G_AOC:
+ printf("%s 100G Ethernet: 100G AOC or 25GAUI C2M AOC with worst BER of 5x10^(-5)\n",
+ pfx);
+ break;
+ case SFF8636_ETHERNET_100G_SR4:
+ printf("%s 100G Ethernet: 100G Base-SR4 or 25GBase-SR\n",
+ pfx);
+ break;
+ case SFF8636_ETHERNET_100G_LR4:
+ printf("%s 100G Ethernet: 100G Base-LR4\n", pfx);
+ break;
+ case SFF8636_ETHERNET_100G_ER4:
+ printf("%s 100G Ethernet: 100G Base-ER4\n", pfx);
+ break;
+ case SFF8636_ETHERNET_100G_SR10:
+ printf("%s 100G Ethernet: 100G Base-SR10\n", pfx);
+ break;
+ case SFF8636_ETHERNET_100G_CWDM4_FEC:
+ printf("%s 100G Ethernet: 100G CWDM4 MSA with FEC\n", pfx);
+ break;
+ case SFF8636_ETHERNET_100G_PSM4:
+ printf("%s 100G Ethernet: 100G PSM4 Parallel SMF\n", pfx);
+ break;
+ case SFF8636_ETHERNET_100G_ACC:
+ printf("%s 100G Ethernet: 100G ACC or 25GAUI C2M ACC with worst BER of 5x10^(-5)\n",
+ pfx);
+ break;
+ case SFF8636_ETHERNET_100G_CWDM4_NO_FEC:
+ printf("%s 100G Ethernet: 100G CWDM4 MSA without FEC\n", pfx);
+ break;
+ case SFF8636_ETHERNET_100G_RSVD1:
+ printf("%s (reserved or unknown)\n", pfx);
+ break;
+ case SFF8636_ETHERNET_100G_CR4:
+ printf("%s 100G Ethernet: 100G Base-CR4 or 25G Base-CR CA-L\n",
+ pfx);
+ break;
+ case SFF8636_ETHERNET_25G_CR_CA_S:
+ printf("%s 25G Ethernet: 25G Base-CR CA-S\n", pfx);
+ break;
+ case SFF8636_ETHERNET_25G_CR_CA_N:
+ printf("%s 25G Ethernet: 25G Base-CR CA-N\n", pfx);
+ break;
+ case SFF8636_ETHERNET_40G_ER4:
+ printf("%s 40G Ethernet: 40G Base-ER4\n", pfx);
+ break;
+ case SFF8636_ETHERNET_4X10_SR:
+ printf("%s 4x10G Ethernet: 10G Base-SR\n", pfx);
+ break;
+ case SFF8636_ETHERNET_40G_PSM4:
+ printf("%s 40G Ethernet: 40G PSM4 Parallel SMF\n", pfx);
+ break;
+ case SFF8636_ETHERNET_G959_P1I1_2D1:
+ printf("%s Ethernet: G959.1 profile P1I1-2D1 (10709 MBd, 2km, 1310nm SM)\n",
+ pfx);
+ break;
+ case SFF8636_ETHERNET_G959_P1S1_2D2:
+ printf("%s Ethernet: G959.1 profile P1S1-2D2 (10709 MBd, 40km, 1550nm SM)\n",
+ pfx);
+ break;
+ case SFF8636_ETHERNET_G959_P1L1_2D2:
+ printf("%s Ethernet: G959.1 profile P1L1-2D2 (10709 MBd, 80km, 1550nm SM)\n",
+ pfx);
+ break;
+ case SFF8636_ETHERNET_10GT_SFI:
+ printf("%s 10G Ethernet: 10G Base-T with SFI electrical interface\n",
+ pfx);
+ break;
+ case SFF8636_ETHERNET_100G_CLR4:
+ printf("%s 100G Ethernet: 100G CLR4\n", pfx);
+ break;
+ case SFF8636_ETHERNET_100G_AOC2:
+ printf("%s 100G Ethernet: 100G AOC or 25GAUI C2M AOC with worst BER of 10^(-12)\n",
+ pfx);
+ break;
+ case SFF8636_ETHERNET_100G_ACC2:
+ printf("%s 100G Ethernet: 100G ACC or 25GAUI C2M ACC with worst BER of 10^(-12)\n",
+ pfx);
+ break;
+ default:
+ printf("%s (reserved or unknown)\n", pfx);
+ break;
+ }
+ }
+
+ /* SONET Compliance Codes */
+ if (id[SFF8636_SONET_COMP_OFFSET] & (SFF8636_SONET_40G_OTN))
+ printf("%s 40G OTN (OTU3B/OTU3C)\n", pfx);
+ if (id[SFF8636_SONET_COMP_OFFSET] & (SFF8636_SONET_OC48_LR))
+ printf("%s SONET: OC-48, long reach\n", pfx);
+ if (id[SFF8636_SONET_COMP_OFFSET] & (SFF8636_SONET_OC48_IR))
+ printf("%s SONET: OC-48, intermediate reach\n", pfx);
+ if (id[SFF8636_SONET_COMP_OFFSET] & (SFF8636_SONET_OC48_SR))
+ printf("%s SONET: OC-48, short reach\n", pfx);
+
+ /* SAS/SATA Compliance Codes */
+ if (id[SFF8636_SAS_COMP_OFFSET] & (SFF8636_SAS_6G))
+ printf("%s SAS 6.0G\n", pfx);
+ if (id[SFF8636_SAS_COMP_OFFSET] & (SFF8636_SAS_3G))
+ printf("%s SAS 3.0G\n", pfx);
+
+ /* Ethernet Compliance Codes */
+ if (id[SFF8636_GIGE_COMP_OFFSET] & SFF8636_GIGE_1000_BASE_T)
+ printf("%s Ethernet: 1000BASE-T\n", pfx);
+ if (id[SFF8636_GIGE_COMP_OFFSET] & SFF8636_GIGE_1000_BASE_CX)
+ printf("%s Ethernet: 1000BASE-CX\n", pfx);
+ if (id[SFF8636_GIGE_COMP_OFFSET] & SFF8636_GIGE_1000_BASE_LX)
+ printf("%s Ethernet: 1000BASE-LX\n", pfx);
+ if (id[SFF8636_GIGE_COMP_OFFSET] & SFF8636_GIGE_1000_BASE_SX)
+ printf("%s Ethernet: 1000BASE-SX\n", pfx);
+
+ /* Fibre Channel link length */
+ if (id[SFF8636_FC_LEN_OFFSET] & SFF8636_FC_LEN_VERY_LONG)
+ printf("%s FC: very long distance (V)\n", pfx);
+ if (id[SFF8636_FC_LEN_OFFSET] & SFF8636_FC_LEN_SHORT)
+ printf("%s FC: short distance (S)\n", pfx);
+ if (id[SFF8636_FC_LEN_OFFSET] & SFF8636_FC_LEN_INT)
+ printf("%s FC: intermediate distance (I)\n", pfx);
+ if (id[SFF8636_FC_LEN_OFFSET] & SFF8636_FC_LEN_LONG)
+ printf("%s FC: long distance (L)\n", pfx);
+ if (id[SFF8636_FC_LEN_OFFSET] & SFF8636_FC_LEN_MED)
+ printf("%s FC: medium distance (M)\n", pfx);
+
+ /* Fibre Channel transmitter technology */
+ if (id[SFF8636_FC_LEN_OFFSET] & SFF8636_FC_TECH_LONG_LC)
+ printf("%s FC: Longwave laser (LC)\n", pfx);
+ if (id[SFF8636_FC_LEN_OFFSET] & SFF8636_FC_TECH_ELEC_INTER)
+ printf("%s FC: Electrical inter-enclosure (EL)\n", pfx);
+ if (id[SFF8636_FC_TECH_OFFSET] & SFF8636_FC_TECH_ELEC_INTRA)
+ printf("%s FC: Electrical intra-enclosure (EL)\n", pfx);
+ if (id[SFF8636_FC_TECH_OFFSET] & SFF8636_FC_TECH_SHORT_WO_OFC)
+ printf("%s FC: Shortwave laser w/o OFC (SN)\n", pfx);
+ if (id[SFF8636_FC_TECH_OFFSET] & SFF8636_FC_TECH_SHORT_W_OFC)
+ printf("%s FC: Shortwave laser with OFC (SL)\n", pfx);
+ if (id[SFF8636_FC_TECH_OFFSET] & SFF8636_FC_TECH_LONG_LL)
+ printf("%s FC: Longwave laser (LL)\n", pfx);
+
+ /* Fibre Channel transmission media */
+ if (id[SFF8636_FC_TRANS_MEDIA_OFFSET] & SFF8636_FC_TRANS_MEDIA_TW)
+ printf("%s FC: Twin Axial Pair (TW)\n", pfx);
+ if (id[SFF8636_FC_TRANS_MEDIA_OFFSET] & SFF8636_FC_TRANS_MEDIA_TP)
+ printf("%s FC: Twisted Pair (TP)\n", pfx);
+ if (id[SFF8636_FC_TRANS_MEDIA_OFFSET] & SFF8636_FC_TRANS_MEDIA_MI)
+ printf("%s FC: Miniature Coax (MI)\n", pfx);
+ if (id[SFF8636_FC_TRANS_MEDIA_OFFSET] & SFF8636_FC_TRANS_MEDIA_TV)
+ printf("%s FC: Video Coax (TV)\n", pfx);
+ if (id[SFF8636_FC_TRANS_MEDIA_OFFSET] & SFF8636_FC_TRANS_MEDIA_M6)
+ printf("%s FC: Multimode, 62.5m (M6)\n", pfx);
+ if (id[SFF8636_FC_TRANS_MEDIA_OFFSET] & SFF8636_FC_TRANS_MEDIA_M5)
+ printf("%s FC: Multimode, 50m (M5)\n", pfx);
+ if (id[SFF8636_FC_TRANS_MEDIA_OFFSET] & SFF8636_FC_TRANS_MEDIA_OM3)
+ printf("%s FC: Multimode, 50um (OM3)\n", pfx);
+ if (id[SFF8636_FC_TRANS_MEDIA_OFFSET] & SFF8636_FC_TRANS_MEDIA_SM)
+ printf("%s FC: Single Mode (SM)\n", pfx);
+
+ /* Fibre Channel speed */
+ if (id[SFF8636_FC_SPEED_OFFSET] & SFF8636_FC_SPEED_1200_MBPS)
+ printf("%s FC: 1200 MBytes/sec\n", pfx);
+ if (id[SFF8636_FC_SPEED_OFFSET] & SFF8636_FC_SPEED_800_MBPS)
+ printf("%s FC: 800 MBytes/sec\n", pfx);
+ if (id[SFF8636_FC_SPEED_OFFSET] & SFF8636_FC_SPEED_1600_MBPS)
+ printf("%s FC: 1600 MBytes/sec\n", pfx);
+ if (id[SFF8636_FC_SPEED_OFFSET] & SFF8636_FC_SPEED_400_MBPS)
+ printf("%s FC: 400 MBytes/sec\n", pfx);
+ if (id[SFF8636_FC_SPEED_OFFSET] & SFF8636_FC_SPEED_200_MBPS)
+ printf("%s FC: 200 MBytes/sec\n", pfx);
+ if (id[SFF8636_FC_SPEED_OFFSET] & SFF8636_FC_SPEED_100_MBPS)
+ printf("%s FC: 100 MBytes/sec\n", pfx);
+}
+
+static void sff8636_show_encoding(const __u8 *id)
+{
+ sff8024_show_encoding(id, SFF8636_ENCODING_OFFSET, ETH_MODULE_SFF_8636);
+}
+
+static void sff8636_show_rate_identifier(const __u8 *id)
+{
+ /* TODO: Need to fix rate select logic */
+ printf("\t%-41s : 0x%02x\n", "Rate identifier",
+ id[SFF8636_EXT_RS_OFFSET]);
+}
+
+static void sff8636_show_oui(const __u8 *id)
+{
+ sff8024_show_oui(id, SFF8636_VENDOR_OUI_OFFSET);
+}
+
+static void sff8636_show_wavelength_or_copper_compliance(const __u8 *id)
+{
+ printf("\t%-41s : 0x%02x", "Transmitter technology",
+ (id[SFF8636_DEVICE_TECH_OFFSET] & SFF8636_TRANS_TECH_MASK));
+
+ switch (id[SFF8636_DEVICE_TECH_OFFSET] & SFF8636_TRANS_TECH_MASK) {
+ case SFF8636_TRANS_850_VCSEL:
+ printf(" (850 nm VCSEL)\n");
+ break;
+ case SFF8636_TRANS_1310_VCSEL:
+ printf(" (1310 nm VCSEL)\n");
+ break;
+ case SFF8636_TRANS_1550_VCSEL:
+ printf(" (1550 nm VCSEL)\n");
+ break;
+ case SFF8636_TRANS_1310_FP:
+ printf(" (1310 nm FP)\n");
+ break;
+ case SFF8636_TRANS_1310_DFB:
+ printf(" (1310 nm DFB)\n");
+ break;
+ case SFF8636_TRANS_1550_DFB:
+ printf(" (1550 nm DFB)\n");
+ break;
+ case SFF8636_TRANS_1310_EML:
+ printf(" (1310 nm EML)\n");
+ break;
+ case SFF8636_TRANS_1550_EML:
+ printf(" (1550 nm EML)\n");
+ break;
+ case SFF8636_TRANS_OTHERS:
+ printf(" (Others/Undefined)\n");
+ break;
+ case SFF8636_TRANS_1490_DFB:
+ printf(" (1490 nm DFB)\n");
+ break;
+ case SFF8636_TRANS_COPPER_PAS_UNEQUAL:
+ printf(" (Copper cable unequalized)\n");
+ break;
+ case SFF8636_TRANS_COPPER_PAS_EQUAL:
+ printf(" (Copper cable passive equalized)\n");
+ break;
+ case SFF8636_TRANS_COPPER_LNR_FAR_EQUAL:
+ printf(" (Copper cable, near and far end limiting active equalizers)\n");
+ break;
+ case SFF8636_TRANS_COPPER_FAR_EQUAL:
+ printf(" (Copper cable, far end limiting active equalizers)\n");
+ break;
+ case SFF8636_TRANS_COPPER_NEAR_EQUAL:
+ printf(" (Copper cable, near end limiting active equalizers)\n");
+ break;
+ case SFF8636_TRANS_COPPER_LNR_EQUAL:
+ printf(" (Copper cable, linear active equalizers)\n");
+ break;
+ }
+
+ if ((id[SFF8636_DEVICE_TECH_OFFSET] & SFF8636_TRANS_TECH_MASK)
+ >= SFF8636_TRANS_COPPER_PAS_UNEQUAL) {
+ printf("\t%-41s : %udb\n", "Attenuation at 2.5GHz",
+ id[SFF8636_WAVELEN_HIGH_BYTE_OFFSET]);
+ printf("\t%-41s : %udb\n", "Attenuation at 5.0GHz",
+ id[SFF8636_WAVELEN_LOW_BYTE_OFFSET]);
+ printf("\t%-41s : %udb\n", "Attenuation at 7.0GHz",
+ id[SFF8636_WAVE_TOL_HIGH_BYTE_OFFSET]);
+ printf("\t%-41s : %udb\n", "Attenuation at 12.9GHz",
+ id[SFF8636_WAVE_TOL_LOW_BYTE_OFFSET]);
+ } else {
+ printf("\t%-41s : %.3lfnm\n", "Laser wavelength",
+ (((id[SFF8636_WAVELEN_HIGH_BYTE_OFFSET] << 8) |
+ id[SFF8636_WAVELEN_LOW_BYTE_OFFSET])*0.05));
+ printf("\t%-41s : %.3lfnm\n", "Laser wavelength tolerance",
+ (((id[SFF8636_WAVE_TOL_HIGH_BYTE_OFFSET] << 8) |
+ id[SFF8636_WAVE_TOL_LOW_BYTE_OFFSET])*0.005));
+ }
+}
+
+static void sff8636_show_revision_compliance(const __u8 *id)
+{
+ static const char *pfx =
+ "\tRevision Compliance :";
+
+ switch (id[SFF8636_REV_COMPLIANCE_OFFSET]) {
+ case SFF8636_REV_UNSPECIFIED:
+ printf("%s Revision not specified\n", pfx);
+ break;
+ case SFF8636_REV_8436_48:
+ printf("%s SFF-8436 Rev 4.8 or earlier\n", pfx);
+ break;
+ case SFF8636_REV_8436_8636:
+ printf("%s SFF-8436 Rev 4.8 or earlier\n", pfx);
+ break;
+ case SFF8636_REV_8636_13:
+ printf("%s SFF-8636 Rev 1.3 or earlier\n", pfx);
+ break;
+ case SFF8636_REV_8636_14:
+ printf("%s SFF-8636 Rev 1.4\n", pfx);
+ break;
+ case SFF8636_REV_8636_15:
+ printf("%s SFF-8636 Rev 1.5\n", pfx);
+ break;
+ case SFF8636_REV_8636_20:
+ printf("%s SFF-8636 Rev 2.0\n", pfx);
+ break;
+ case SFF8636_REV_8636_27:
+ printf("%s SFF-8636 Rev 2.5/2.6/2.7\n", pfx);
+ break;
+ default:
+ printf("%s Unallocated\n", pfx);
+ break;
+ }
+}
+
+/*
+ * 2-byte internal temperature conversions:
+ * First byte is a signed 8-bit integer, which is the temp decimal part
+ * Second byte are 1/256th of degree, which are added to the dec part.
+ */
+#define SFF8636_OFFSET_TO_TEMP(offset) ((__s16)OFFSET_TO_U16(offset))
+
+static void sff8636_dom_parse(const __u8 *id, struct sff_diags *sd)
+{
+ int i = 0;
+
+ /* Monitoring Thresholds for Alarms and Warnings */
+ sd->sfp_voltage[MCURR] = OFFSET_TO_U16(SFF8636_VCC_CURR);
+ sd->sfp_voltage[HALRM] = OFFSET_TO_U16(SFF8636_VCC_HALRM);
+ sd->sfp_voltage[LALRM] = OFFSET_TO_U16(SFF8636_VCC_LALRM);
+ sd->sfp_voltage[HWARN] = OFFSET_TO_U16(SFF8636_VCC_HWARN);
+ sd->sfp_voltage[LWARN] = OFFSET_TO_U16(SFF8636_VCC_LWARN);
+
+ sd->sfp_temp[MCURR] = SFF8636_OFFSET_TO_TEMP(SFF8636_TEMP_CURR);
+ sd->sfp_temp[HALRM] = SFF8636_OFFSET_TO_TEMP(SFF8636_TEMP_HALRM);
+ sd->sfp_temp[LALRM] = SFF8636_OFFSET_TO_TEMP(SFF8636_TEMP_LALRM);
+ sd->sfp_temp[HWARN] = SFF8636_OFFSET_TO_TEMP(SFF8636_TEMP_HWARN);
+ sd->sfp_temp[LWARN] = SFF8636_OFFSET_TO_TEMP(SFF8636_TEMP_LWARN);
+
+ sd->bias_cur[HALRM] = OFFSET_TO_U16(SFF8636_TX_BIAS_HALRM);
+ sd->bias_cur[LALRM] = OFFSET_TO_U16(SFF8636_TX_BIAS_LALRM);
+ sd->bias_cur[HWARN] = OFFSET_TO_U16(SFF8636_TX_BIAS_HWARN);
+ sd->bias_cur[LWARN] = OFFSET_TO_U16(SFF8636_TX_BIAS_LWARN);
+
+ sd->tx_power[HALRM] = OFFSET_TO_U16(SFF8636_TX_PWR_HALRM);
+ sd->tx_power[LALRM] = OFFSET_TO_U16(SFF8636_TX_PWR_LALRM);
+ sd->tx_power[HWARN] = OFFSET_TO_U16(SFF8636_TX_PWR_HWARN);
+ sd->tx_power[LWARN] = OFFSET_TO_U16(SFF8636_TX_PWR_LWARN);
+
+ sd->rx_power[HALRM] = OFFSET_TO_U16(SFF8636_RX_PWR_HALRM);
+ sd->rx_power[LALRM] = OFFSET_TO_U16(SFF8636_RX_PWR_LALRM);
+ sd->rx_power[HWARN] = OFFSET_TO_U16(SFF8636_RX_PWR_HWARN);
+ sd->rx_power[LWARN] = OFFSET_TO_U16(SFF8636_RX_PWR_LWARN);
+
+
+ /* Channel Specific Data */
+ for (i = 0; i < MAX_CHANNEL_NUM; i++) {
+ u8 rx_power_offset, tx_bias_offset;
+ u8 tx_power_offset;
+
+ switch (i) {
+ case 0:
+ rx_power_offset = SFF8636_RX_PWR_1_OFFSET;
+ tx_power_offset = SFF8636_TX_PWR_1_OFFSET;
+ tx_bias_offset = SFF8636_TX_BIAS_1_OFFSET;
+ break;
+ case 1:
+ rx_power_offset = SFF8636_RX_PWR_2_OFFSET;
+ tx_power_offset = SFF8636_TX_PWR_2_OFFSET;
+ tx_bias_offset = SFF8636_TX_BIAS_2_OFFSET;
+ break;
+ case 2:
+ rx_power_offset = SFF8636_RX_PWR_3_OFFSET;
+ tx_power_offset = SFF8636_TX_PWR_3_OFFSET;
+ tx_bias_offset = SFF8636_TX_BIAS_3_OFFSET;
+ break;
+ case 3:
+ rx_power_offset = SFF8636_RX_PWR_4_OFFSET;
+ tx_power_offset = SFF8636_TX_PWR_4_OFFSET;
+ tx_bias_offset = SFF8636_TX_BIAS_4_OFFSET;
+ break;
+ default:
+ printf(" Invalid channel: %d\n", i);
+ break;
+ }
+ sd->scd[i].bias_cur = OFFSET_TO_U16(tx_bias_offset);
+ sd->scd[i].rx_power = OFFSET_TO_U16(rx_power_offset);
+ sd->scd[i].tx_power = OFFSET_TO_U16(tx_power_offset);
+ }
+
+}
+
+static void sff8636_show_dom(const __u8 *id, __u32 eeprom_len)
+{
+ struct sff_diags sd;
+ char *rx_power_string = NULL;
+ char power_string[MAX_DESC_SIZE];
+ int i;
+
+ /*
+ * There is no clear identifier to signify the existence of
+ * optical diagnostics similar to SFF-8472. So checking existence
+ * of page 3, will provide the gurantee for existence of alarms
+ * and thresholds
+ * If pagging support exists, then supports_alarms is marked as 1
+ */
+
+ if (eeprom_len == ETH_MODULE_SFF_8636_MAX_LEN) {
+ if (!(id[SFF8636_STATUS_2_OFFSET] &
+ SFF8636_STATUS_PAGE_3_PRESENT)) {
+ sd.supports_alarms = 1;
+ }
+ }
+
+ sd.rx_power_type = id[SFF8636_DIAG_TYPE_OFFSET] &
+ SFF8636_RX_PWR_TYPE_MASK;
+ sd.tx_power_type = id[SFF8636_DIAG_TYPE_OFFSET] &
+ SFF8636_RX_PWR_TYPE_MASK;
+
+ sff8636_dom_parse(id, &sd);
+
+ PRINT_TEMP("Module temperature", sd.sfp_temp[MCURR]);
+ PRINT_VCC("Module voltage", sd.sfp_voltage[MCURR]);
+
+ /*
+ * SFF-8636/8436 spec is not clear whether RX power/ TX bias
+ * current fields are supported or not. A valid temperature
+ * reading is used as existence for TX/RX power.
+ */
+ if ((sd.sfp_temp[MCURR] == 0x0) || (sd.sfp_temp[MCURR] == 0xFFFF))
+ return;
+
+ printf("\t%-41s : %s\n", "Alarm/warning flags implemented",
+ (sd.supports_alarms ? "Yes" : "No"));
+
+ for (i = 0; i < MAX_CHANNEL_NUM; i++) {
+ snprintf(power_string, MAX_DESC_SIZE, "%s (Channel %d)",
+ "Laser tx bias current", i+1);
+ PRINT_BIAS(power_string, sd.scd[i].bias_cur);
+ }
+
+ for (i = 0; i < MAX_CHANNEL_NUM; i++) {
+ snprintf(power_string, MAX_DESC_SIZE, "%s (Channel %d)",
+ "Transmit avg optical power", i+1);
+ PRINT_xX_PWR(power_string, sd.scd[i].tx_power);
+ }
+
+ if (!sd.rx_power_type)
+ rx_power_string = "Receiver signal OMA";
+ else
+ rx_power_string = "Rcvr signal avg optical power";
+
+ for (i = 0; i < MAX_CHANNEL_NUM; i++) {
+ snprintf(power_string, MAX_DESC_SIZE, "%s(Channel %d)",
+ rx_power_string, i+1);
+ PRINT_xX_PWR(power_string, sd.scd[i].rx_power);
+ }
+
+ if (sd.supports_alarms) {
+ for (i = 0; sff8636_aw_flags[i].str; ++i) {
+ printf("\t%-41s : %s\n", sff8636_aw_flags[i].str,
+ id[sff8636_aw_flags[i].offset]
+ & sff8636_aw_flags[i].value ? "On" : "Off");
+ }
+
+ sff_show_thresholds(sd);
+ }
+
+}
+void sff8636_show_all(const __u8 *id, __u32 eeprom_len)
+{
+ sff8636_show_identifier(id);
+ if ((id[SFF8636_ID_OFFSET] == SFF8024_ID_QSFP) ||
+ (id[SFF8636_ID_OFFSET] == SFF8024_ID_QSFP_PLUS) ||
+ (id[SFF8636_ID_OFFSET] == SFF8024_ID_QSFP28)) {
+ sff8636_show_ext_identifier(id);
+ sff8636_show_connector(id);
+ sff8636_show_transceiver(id);
+ sff8636_show_encoding(id);
+ sff_show_value_with_unit(id, SFF8636_BR_NOMINAL_OFFSET,
+ "BR, Nominal", 100, "Mbps");
+ sff8636_show_rate_identifier(id);
+ sff_show_value_with_unit(id, SFF8636_SM_LEN_OFFSET,
+ "Length (SMF,km)", 1, "km");
+ sff_show_value_with_unit(id, SFF8636_OM3_LEN_OFFSET,
+ "Length (OM3 50um)", 2, "m");
+ sff_show_value_with_unit(id, SFF8636_OM2_LEN_OFFSET,
+ "Length (OM2 50um)", 1, "m");
+ sff_show_value_with_unit(id, SFF8636_OM1_LEN_OFFSET,
+ "Length (OM1 62.5um)", 1, "m");
+ sff_show_value_with_unit(id, SFF8636_CBL_LEN_OFFSET,
+ "Length (Copper or Active cable)", 1, "m");
+ sff8636_show_wavelength_or_copper_compliance(id);
+ sff_show_ascii(id, SFF8636_VENDOR_NAME_START_OFFSET,
+ SFF8636_VENDOR_NAME_END_OFFSET, "Vendor name");
+ sff8636_show_oui(id);
+ sff_show_ascii(id, SFF8636_VENDOR_PN_START_OFFSET,
+ SFF8636_VENDOR_PN_END_OFFSET, "Vendor PN");
+ sff_show_ascii(id, SFF8636_VENDOR_REV_START_OFFSET,
+ SFF8636_VENDOR_REV_END_OFFSET, "Vendor rev");
+ sff_show_ascii(id, SFF8636_VENDOR_SN_START_OFFSET,
+ SFF8636_VENDOR_SN_END_OFFSET, "Vendor SN");
+ sff8636_show_revision_compliance(id);
+ sff8636_show_dom(id, eeprom_len);
+ }
+}
diff --git a/qsfp.h b/qsfp.h
new file mode 100644
index 0000000..553ca5f
--- /dev/null
+++ b/qsfp.h
@@ -0,0 +1,595 @@
+/*
+ * SFF 8636 standards based QSFP EEPROM Field Definitions
+ *
+ * Vidya Ravipati <vidya@...ulusnetworks.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef QSFP_H__
+#define QSFP_H__
+
+/*------------------------------------------------------------------------------
+ *
+ * QSFP EEPROM data structures
+ *
+ * register info from SFF-8636 Rev 2.7
+ */
+
+/*------------------------------------------------------------------------------
+ *
+ * Lower Memory Page 00h
+ * Measurement, Diagnostic and Control Functions
+ *
+ */
+/* Identifier - 0 */
+/* Values are defined under SFF8024_ID_OFFSET */
+#define SFF8636_ID_OFFSET 0x00
+
+#define SFF8636_REV_COMPLIANCE_OFFSET 0x01
+#define SFF8636_REV_UNSPECIFIED 0x00
+#define SFF8636_REV_8436_48 0x01
+#define SFF8636_REV_8436_8636 0x02
+#define SFF8636_REV_8636_13 0x03
+#define SFF8636_REV_8636_14 0x04
+#define SFF8636_REV_8636_15 0x05
+#define SFF8636_REV_8636_20 0x06
+#define SFF8636_REV_8636_27 0x07
+
+#define SFF8636_STATUS_2_OFFSET 0x02
+/* Flat Memory:0- Paging, 1- Page 0 only */
+#define SFF8636_STATUS_PAGE_3_PRESENT (1 << 2)
+#define SFF8636_STATUS_INTL_OUTPUT (1 << 1)
+#define SFF8636_STATUS_DATA_NOT_READY (1 << 0)
+
+/* Channel Status Interrupt Flags - 3-5 */
+#define SFF8636_LOS_AW_OFFSET 0x03
+#define SFF8636_TX4_LOS_AW (1 << 7)
+#define SFF8636_TX3_LOS_AW (1 << 6)
+#define SFF8636_TX2_LOS_AW (1 << 5)
+#define SFF8636_TX1_LOS_AW (1 << 4)
+#define SFF8636_RX4_LOS_AW (1 << 3)
+#define SFF8636_RX3_LOS_AW (1 << 2)
+#define SFF8636_RX2_LOS_AW (1 << 1)
+#define SFF8636_RX1_LOS_AW (1 << 0)
+
+#define SFF8636_FAULT_AW_OFFSET 0x04
+#define SFF8636_TX4_FAULT_AW (1 << 3)
+#define SFF8636_TX3_FAULT_AW (1 << 2)
+#define SFF8636_TX2_FAULT_AW (1 << 1)
+#define SFF8636_TX1_FAULT_AW (1 << 0)
+
+/* Module Monitor Interrupt Flags - 6-8 */
+#define SFF8636_TEMP_AW_OFFSET 0x06
+#define SFF8636_TEMP_HALARM_STATUS (1 << 7)
+#define SFF8636_TEMP_LALARM_STATUS (1 << 6)
+#define SFF8636_TEMP_HWARN_STATUS (1 << 5)
+#define SFF8636_TEMP_LWARN_STATUS (1 << 4)
+
+#define SFF8636_VCC_AW_OFFSET 0x07
+#define SFF8636_VCC_HALARM_STATUS (1 << 7)
+#define SFF8636_VCC_LALARM_STATUS (1 << 6)
+#define SFF8636_VCC_HWARN_STATUS (1 << 5)
+#define SFF8636_VCC_LWARN_STATUS (1 << 4)
+
+/* Channel Monitor Interrupt Flags - 9-21 */
+#define SFF8636_RX_PWR_12_AW_OFFSET 0x09
+#define SFF8636_RX_PWR_1_HALARM (1 << 7)
+#define SFF8636_RX_PWR_1_LALARM (1 << 6)
+#define SFF8636_RX_PWR_1_HWARN (1 << 5)
+#define SFF8636_RX_PWR_1_LWARN (1 << 4)
+#define SFF8636_RX_PWR_2_HALARM (1 << 3)
+#define SFF8636_RX_PWR_2_LALARM (1 << 2)
+#define SFF8636_RX_PWR_2_HWARN (1 << 1)
+#define SFF8636_RX_PWR_2_LWARN (1 << 0)
+
+#define SFF8636_RX_PWR_34_AW_OFFSET 0x0A
+#define SFF8636_RX_PWR_3_HALARM (1 << 7)
+#define SFF8636_RX_PWR_3_LALARM (1 << 6)
+#define SFF8636_RX_PWR_3_HWARN (1 << 5)
+#define SFF8636_RX_PWR_3_LWARN (1 << 4)
+#define SFF8636_RX_PWR_4_HALARM (1 << 3)
+#define SFF8636_RX_PWR_4_LALARM (1 << 2)
+#define SFF8636_RX_PWR_4_HWARN (1 << 1)
+#define SFF8636_RX_PWR_4_LWARN (1 << 0)
+
+#define SFF8636_TX_BIAS_12_AW_OFFSET 0x0B
+#define SFF8636_TX_BIAS_1_HALARM (1 << 7)
+#define SFF8636_TX_BIAS_1_LALARM (1 << 6)
+#define SFF8636_TX_BIAS_1_HWARN (1 << 5)
+#define SFF8636_TX_BIAS_1_LWARN (1 << 4)
+#define SFF8636_TX_BIAS_2_HALARM (1 << 3)
+#define SFF8636_TX_BIAS_2_LALARM (1 << 2)
+#define SFF8636_TX_BIAS_2_HWARN (1 << 1)
+#define SFF8636_TX_BIAS_2_LWARN (1 << 0)
+
+#define SFF8636_TX_BIAS_34_AW_OFFSET 0xC
+#define SFF8636_TX_BIAS_3_HALARM (1 << 7)
+#define SFF8636_TX_BIAS_3_LALARM (1 << 6)
+#define SFF8636_TX_BIAS_3_HWARN (1 << 5)
+#define SFF8636_TX_BIAS_3_LWARN (1 << 4)
+#define SFF8636_TX_BIAS_4_HALARM (1 << 3)
+#define SFF8636_TX_BIAS_4_LALARM (1 << 2)
+#define SFF8636_TX_BIAS_4_HWARN (1 << 1)
+#define SFF8636_TX_BIAS_4_LWARN (1 << 0)
+
+#define SFF8636_TX_PWR_12_AW_OFFSET 0x0D
+#define SFF8636_TX_PWR_1_HALARM (1 << 7)
+#define SFF8636_TX_PWR_1_LALARM (1 << 6)
+#define SFF8636_TX_PWR_1_HWARN (1 << 5)
+#define SFF8636_TX_PWR_1_LWARN (1 << 4)
+#define SFF8636_TX_PWR_2_HALARM (1 << 3)
+#define SFF8636_TX_PWR_2_LALARM (1 << 2)
+#define SFF8636_TX_PWR_2_HWARN (1 << 1)
+#define SFF8636_TX_PWR_2_LWARN (1 << 0)
+
+#define SFF8636_TX_PWR_34_AW_OFFSET 0x0E
+#define SFF8636_TX_PWR_3_HALARM (1 << 7)
+#define SFF8636_TX_PWR_3_LALARM (1 << 6)
+#define SFF8636_TX_PWR_3_HWARN (1 << 5)
+#define SFF8636_TX_PWR_3_LWARN (1 << 4)
+#define SFF8636_TX_PWR_4_HALARM (1 << 3)
+#define SFF8636_TX_PWR_4_LALARM (1 << 2)
+#define SFF8636_TX_PWR_4_HWARN (1 << 1)
+#define SFF8636_TX_PWR_4_LWARN (1 << 0)
+
+/* Module Monitoring Values - 22-33 */
+#define SFF8636_TEMP_CURR 0x16
+#define SFF8636_TEMP_MSB_OFFSET 0x16
+#define SFF8636_TEMP_LSB_OFFSET 0x17
+
+#define SFF8636_VCC_CURR 0x1A
+#define SFF8636_VCC_MSB_OFFSET 0x1A
+#define SFF8636_VCC_LSB_OFFSET 0x1B
+
+/* Channel Monitoring Values - 34-81 */
+#define SFF8636_RX_PWR_1_OFFSET 0x22
+#define SFF8636_RX_PWR_2_OFFSET 0x24
+#define SFF8636_RX_PWR_3_OFFSET 0x26
+#define SFF8636_RX_PWR_4_OFFSET 0x28
+
+#define SFF8636_TX_BIAS_1_OFFSET 0x2A
+#define SFF8636_TX_BIAS_2_OFFSET 0x2C
+#define SFF8636_TX_BIAS_3_OFFSET 0x2E
+#define SFF8636_TX_BIAS_4_OFFSET 0x30
+
+#define SFF8636_TX_PWR_1_OFFSET 0x32
+#define SFF8636_TX_PWR_2_OFFSET 0x34
+#define SFF8636_TX_PWR_3_OFFSET 0x36
+#define SFF8636_TX_PWR_4_OFFSET 0x38
+
+/* Control Bytes - 86 - 99 */
+#define SFF8636_TX_DISABLE_OFFSET 0x56
+#define SFF8636_TX_DISABLE_4 (1 << 3)
+#define SFF8636_TX_DISABLE_3 (1 << 2)
+#define SFF8636_TX_DISABLE_2 (1 << 1)
+#define SFF8636_TX_DISABLE_1 (1 << 0)
+
+#define SFF8636_RX_RATE_SELECT_OFFSET 0x57
+#define SFF8636_RX_RATE_SELECT_4_MASK (3 << 6)
+#define SFF8636_RX_RATE_SELECT_3_MASK (3 << 4)
+#define SFF8636_RX_RATE_SELECT_2_MASK (3 << 2)
+#define SFF8636_RX_RATE_SELECT_1_MASK (3 << 0)
+
+#define SFF8636_TX_RATE_SELECT_OFFSET 0x58
+#define SFF8636_TX_RATE_SELECT_4_MASK (3 << 6)
+#define SFF8636_TX_RATE_SELECT_3_MASK (3 << 4)
+#define SFF8636_TX_RATE_SELECT_2_MASK (3 << 2)
+#define SFF8636_TX_RATE_SELECT_1_MASK (3 << 0)
+
+#define SFF8636_RX_APP_SELECT_4_OFFSET 0x58
+#define SFF8636_RX_APP_SELECT_3_OFFSET 0x59
+#define SFF8636_RX_APP_SELECT_2_OFFSET 0x5A
+#define SFF8636_RX_APP_SELECT_1_OFFSET 0x5B
+
+#define SFF8636_PWR_MODE_OFFSET 0x5D
+#define SFF8636_HIGH_PWR_ENABLE (1 << 2)
+#define SFF8636_LOW_PWR_MODE (1 << 1)
+#define SFF8636_PWR_OVERRIDE (1 << 0)
+
+#define SFF8636_TX_APP_SELECT_4_OFFSET 0x5E
+#define SFF8636_TX_APP_SELECT_3_OFFSET 0x5F
+#define SFF8636_TX_APP_SELECT_2_OFFSET 0x60
+#define SFF8636_TX_APP_SELECT_1_OFFSET 0x61
+
+#define SFF8636_LOS_MASK_OFFSET 0x64
+#define SFF8636_TX_LOS_4_MASK (1 << 7)
+#define SFF8636_TX_LOS_3_MASK (1 << 6)
+#define SFF8636_TX_LOS_2_MASK (1 << 5)
+#define SFF8636_TX_LOS_1_MASK (1 << 4)
+#define SFF8636_RX_LOS_4_MASK (1 << 3)
+#define SFF8636_RX_LOS_3_MASK (1 << 2)
+#define SFF8636_RX_LOS_2_MASK (1 << 1)
+#define SFF8636_RX_LOS_1_MASK (1 << 0)
+
+#define SFF8636_FAULT_MASK_OFFSET 0x65
+#define SFF8636_TX_FAULT_1_MASK (1 << 3)
+#define SFF8636_TX_FAULT_2_MASK (1 << 2)
+#define SFF8636_TX_FAULT_3_MASK (1 << 1)
+#define SFF8636_TX_FAULT_4_MASK (1 << 0)
+
+#define SFF8636_TEMP_MASK_OFFSET 0x67
+#define SFF8636_TEMP_HALARM_MASK (1 << 7)
+#define SFF8636_TEMP_LALARM_MASK (1 << 6)
+#define SFF8636_TEMP_HWARN_MASK (1 << 5)
+#define SFF8636_TEMP_LWARN_MASK (1 << 4)
+
+#define SFF8636_VCC_MASK_OFFSET 0x68
+#define SFF8636_VCC_HALARM_MASK (1 << 7)
+#define SFF8636_VCC_LALARM_MASK (1 << 6)
+#define SFF8636_VCC_HWARN_MASK (1 << 5)
+#define SFF8636_VCC_LWARN_MASK (1 << 4)
+
+/*------------------------------------------------------------------------------
+ *
+ * Upper Memory Page 00h
+ * Serial ID - Base ID, Extended ID and Vendor Specific ID fields
+ *
+ */
+/* Identifier - 128 */
+/* Identifier values same as Lower Memory Page 00h */
+#define SFF8636_UPPER_PAGE_0_ID_OFFSET 0x80
+
+/* Extended Identifier - 128 */
+#define SFF8636_EXT_ID_OFFSET 0x81
+#define SFF8636_EXT_ID_PWR_CLASS_MASK 0xC0
+#define SFF8636_EXT_ID_PWR_CLASS_1 (0 << 6)
+#define SFF8636_EXT_ID_PWR_CLASS_2 (1 << 6)
+#define SFF8636_EXT_ID_PWR_CLASS_3 (2 << 6)
+#define SFF8636_EXT_ID_PWR_CLASS_4 (3 << 6)
+#define SFF8636_EXT_ID_CLIE_MASK 0x10
+#define SFF8636_EXT_ID_CLIEI_CODE_PRESENT (1 << 4)
+#define SFF8636_EXT_ID_CDR_TX_MASK 0x08
+#define SFF8636_EXT_ID_CDR_TX_PRESENT (1 << 3)
+#define SFF8636_EXT_ID_CDR_RX_MASK 0x04
+#define SFF8636_EXT_ID_CDR_RX_PRESENT (1 << 2)
+#define SFF8636_EXT_ID_EPWR_CLASS_MASK 0x03
+#define SFF8636_EXT_ID_PWR_CLASS_LEGACY 0
+#define SFF8636_EXT_ID_PWR_CLASS_5 1
+#define SFF8636_EXT_ID_PWR_CLASS_6 2
+#define SFF8636_EXT_ID_PWR_CLASS_7 3
+
+/* Connector Values offset - 130 */
+/* Values are defined under SFF8024_CTOR */
+#define SFF8636_CTOR_OFFSET 0x82
+#define SFF8636_CTOR_UNKNOWN 0x00
+#define SFF8636_CTOR_SC 0x01
+#define SFF8636_CTOR_FC_STYLE_1 0x02
+#define SFF8636_CTOR_FC_STYLE_2 0x03
+#define SFF8636_CTOR_BNC_TNC 0x04
+#define SFF8636_CTOR_FC_COAX 0x05
+#define SFF8636_CTOR_FIBER_JACK 0x06
+#define SFF8636_CTOR_LC 0x07
+#define SFF8636_CTOR_MT_RJ 0x08
+#define SFF8636_CTOR_MU 0x09
+#define SFF8636_CTOR_SG 0x0A
+#define SFF8636_CTOR_OPT_PT 0x0B
+#define SFF8636_CTOR_MPO 0x0C
+/* 0D-1Fh --- Reserved */
+#define SFF8636_CTOR_HSDC_II 0x20
+#define SFF8636_CTOR_COPPER_PT 0x21
+#define SFF8636_CTOR_RJ45 0x22
+#define SFF8636_CTOR_NO_SEPARABLE 0x23
+#define SFF8636_CTOR_MXC_2X16 0x24
+
+/* Specification Compliance - 131-138 */
+/* Ethernet Compliance Codes - 131 */
+#define SFF8636_ETHERNET_COMP_OFFSET 0x83
+#define SFF8636_ETHERNET_RSRVD (1 << 7)
+#define SFF8636_ETHERNET_10G_LRM (1 << 6)
+#define SFF8636_ETHERNET_10G_LR (1 << 5)
+#define SFF8636_ETHERNET_10G_SR (1 << 4)
+#define SFF8636_ETHERNET_40G_CR4 (1 << 3)
+#define SFF8636_ETHERNET_40G_SR4 (1 << 2)
+#define SFF8636_ETHERNET_40G_LR4 (1 << 1)
+#define SFF8636_ETHERNET_40G_ACTIVE (1 << 0)
+
+/* SONET Compliance Codes - 132 */
+#define SFF8636_SONET_COMP_OFFSET 0x84
+#define SFF8636_SONET_40G_OTN (1 << 3)
+#define SFF8636_SONET_OC48_LR (1 << 2)
+#define SFF8636_SONET_OC48_IR (1 << 1)
+#define SFF8636_SONET_OC48_SR (1 << 0)
+
+/* SAS/SATA Complaince Codes - 133 */
+#define SFF8636_SAS_COMP_OFFSET 0x85
+#define SFF8636_SAS_12G (1 << 6)
+#define SFF8636_SAS_6G (1 << 5)
+#define SFF8636_SAS_3G (1 << 4)
+
+/* Gigabit Ethernet Compliance Codes - 134 */
+#define SFF8636_GIGE_COMP_OFFSET 0x86
+#define SFF8636_GIGE_1000_BASE_T (1 << 3)
+#define SFF8636_GIGE_1000_BASE_CX (1 << 2)
+#define SFF8636_GIGE_1000_BASE_LX (1 << 1)
+#define SFF8636_GIGE_1000_BASE_SX (1 << 0)
+
+/* Fibre Channel Link length/Transmitter Tech. - 135,136 */
+#define SFF8636_FC_LEN_OFFSET 0x87
+#define SFF8636_FC_LEN_VERY_LONG (1 << 7)
+#define SFF8636_FC_LEN_SHORT (1 << 6)
+#define SFF8636_FC_LEN_INT (1 << 5)
+#define SFF8636_FC_LEN_LONG (1 << 4)
+#define SFF8636_FC_LEN_MED (1 << 3)
+#define SFF8636_FC_TECH_LONG_LC (1 << 1)
+#define SFF8636_FC_TECH_ELEC_INTER (1 << 0)
+
+#define SFF8636_FC_TECH_OFFSET 0x88
+#define SFF8636_FC_TECH_ELEC_INTRA (1 << 7)
+#define SFF8636_FC_TECH_SHORT_WO_OFC (1 << 6)
+#define SFF8636_FC_TECH_SHORT_W_OFC (1 << 5)
+#define SFF8636_FC_TECH_LONG_LL (1 << 4)
+
+/* Fibre Channel Transmitter Media - 137 */
+#define SFF8636_FC_TRANS_MEDIA_OFFSET 0x89
+/* Twin Axial Pair */
+#define SFF8636_FC_TRANS_MEDIA_TW (1 << 7)
+/* Shielded Twisted Pair */
+#define SFF8636_FC_TRANS_MEDIA_TP (1 << 6)
+/* Miniature Coax */
+#define SFF8636_FC_TRANS_MEDIA_MI (1 << 5)
+/* Video Coax */
+#define SFF8636_FC_TRANS_MEDIA_TV (1 << 4)
+/* Multi-mode 62.5m */
+#define SFF8636_FC_TRANS_MEDIA_M6 (1 << 3)
+/* Multi-mode 50m */
+#define SFF8636_FC_TRANS_MEDIA_M5 (1 << 2)
+/* Multi-mode 50um */
+#define SFF8636_FC_TRANS_MEDIA_OM3 (1 << 1)
+/* Single Mode */
+#define SFF8636_FC_TRANS_MEDIA_SM (1 << 0)
+
+/* Fibre Channel Speed - 138 */
+#define SFF8636_FC_SPEED_OFFSET 0x8A
+#define SFF8636_FC_SPEED_1200_MBPS (1 << 7)
+#define SFF8636_FC_SPEED_800_MBPS (1 << 6)
+#define SFF8636_FC_SPEED_1600_MBPS (1 << 5)
+#define SFF8636_FC_SPEED_400_MBPS (1 << 4)
+#define SFF8636_FC_SPEED_200_MBPS (1 << 2)
+#define SFF8636_FC_SPEED_100_MBPS (1 << 0)
+
+/* Encoding - 139 */
+/* Values are defined under SFF8024_ENCODING */
+#define SFF8636_ENCODING_OFFSET 0x8B
+#define SFF8636_ENCODING_MANCHESTER 0x06
+#define SFF8636_ENCODING_64B66B 0x05
+#define SFF8636_ENCODING_SONET 0x04
+#define SFF8636_ENCODING_NRZ 0x03
+#define SFF8636_ENCODING_4B5B 0x02
+#define SFF8636_ENCODING_8B10B 0x01
+#define SFF8636_ENCODING_UNSPEC 0x00
+
+/* BR, Nominal - 140 */
+#define SFF8636_BR_NOMINAL_OFFSET 0x8C
+
+/* Extended RateSelect - 141 */
+#define SFF8636_EXT_RS_OFFSET 0x8D
+#define SFF8636_EXT_RS_V1 (1 << 0)
+
+/* Length (Standard SM Fiber)-km - 142 */
+#define SFF8636_SM_LEN_OFFSET 0x8E
+
+/* Length (OM3)-Unit 2m - 143 */
+#define SFF8636_OM3_LEN_OFFSET 0x8F
+
+/* Length (OM2)-Unit 1m - 144 */
+#define SFF8636_OM2_LEN_OFFSET 0x90
+
+/* Length (OM1)-Unit 1m - 145 */
+#define SFF8636_OM1_LEN_OFFSET 0x91
+
+/* Cable Assembly Length -Unit 1m - 146 */
+#define SFF8636_CBL_LEN_OFFSET 0x92
+
+/* Device Technology - 147 */
+#define SFF8636_DEVICE_TECH_OFFSET 0x93
+/* Transmitter Technology */
+#define SFF8636_TRANS_TECH_MASK 0xF0
+/* Copper cable, linear active equalizers */
+#define SFF8636_TRANS_COPPER_LNR_EQUAL (15 << 4)
+/* Copper cable, near end limiting active equalizers */
+#define SFF8636_TRANS_COPPER_NEAR_EQUAL (14 << 4)
+/* Copper cable, far end limiting active equalizers */
+#define SFF8636_TRANS_COPPER_FAR_EQUAL (13 << 4)
+/* Copper cable, near & far end limiting active equalizers */
+#define SFF8636_TRANS_COPPER_LNR_FAR_EQUAL (12 << 4)
+/* Copper cable, passive equalized */
+#define SFF8636_TRANS_COPPER_PAS_EQUAL (11 << 4)
+/* Copper cable, unequalized */
+#define SFF8636_TRANS_COPPER_PAS_UNEQUAL (10 << 4)
+/* 1490 nm DFB */
+#define SFF8636_TRANS_1490_DFB (9 << 4)
+/* Others */
+#define SFF8636_TRANS_OTHERS (8 << 4)
+/* 1550 nm EML */
+#define SFF8636_TRANS_1550_EML (7 << 4)
+/* 1310 nm EML */
+#define SFF8636_TRANS_1310_EML (6 << 4)
+/* 1550 nm DFB */
+#define SFF8636_TRANS_1550_DFB (5 << 4)
+/* 1310 nm DFB */
+#define SFF8636_TRANS_1310_DFB (4 << 4)
+/* 1310 nm FP */
+#define SFF8636_TRANS_1310_FP (3 << 4)
+/* 1550 nm VCSEL */
+#define SFF8636_TRANS_1550_VCSEL (2 << 4)
+/* 1310 nm VCSEL */
+#define SFF8636_TRANS_1310_VCSEL (1 << 4)
+/* 850 nm VCSEL */
+#define SFF8636_TRANS_850_VCSEL (0 << 4)
+
+ /* Active/No wavelength control */
+#define SFF8636_DEV_TECH_ACTIVE_WAVE_LEN (1 << 3)
+/* Cooled transmitter */
+#define SFF8636_DEV_TECH_COOL_TRANS (1 << 2)
+/* APD/Pin Detector */
+#define SFF8636_DEV_TECH_APD_DETECTOR (1 << 1)
+/* Transmitter tunable */
+#define SFF8636_DEV_TECH_TUNABLE (1 << 0)
+
+/* Vendor Name - 148-163 */
+#define SFF8636_VENDOR_NAME_START_OFFSET 0x94
+#define SFF8636_VENDOR_NAME_END_OFFSET 0xA3
+
+/* Extended Module Codes - 164 */
+#define SFF8636_EXT_MOD_CODE_OFFSET 0xA4
+#define SFF8636_EXT_MOD_INFINIBAND_EDR (1 << 4)
+#define SFF8636_EXT_MOD_INFINIBAND_FDR (1 << 3)
+#define SFF8636_EXT_MOD_INFINIBAND_QDR (1 << 2)
+#define SFF8636_EXT_MOD_INFINIBAND_DDR (1 << 1)
+#define SFF8636_EXT_MOD_INFINIBAND_SDR (1 << 0)
+
+/* Vendor OUI - 165-167 */
+#define SFF8636_VENDOR_OUI_OFFSET 0xA5
+#define SFF8636_VENDOR_OUI_LEN 3
+
+/* Vendor OUI - 165-167 */
+#define SFF8636_VENDOR_PN_START_OFFSET 0xA8
+#define SFF8636_VENDOR_PN_END_OFFSET 0xB7
+
+/* Vendor Revision - 184-185 */
+#define SFF8636_VENDOR_REV_START_OFFSET 0xB8
+#define SFF8636_VENDOR_REV_END_OFFSET 0xB9
+
+/* Wavelength - 186-187 */
+#define SFF8636_WAVELEN_HIGH_BYTE_OFFSET 0xBA
+#define SFF8636_WAVELEN_LOW_BYTE_OFFSET 0xBB
+
+/* Wavelength Tolerance- 188-189 */
+#define SFF8636_WAVE_TOL_HIGH_BYTE_OFFSET 0xBC
+#define SFF8636_WAVE_TOL_LOW_BYTE_OFFSET 0xBD
+
+/* Max case temp - Other than 70 C - 190 */
+#define SFF8636_MAXCASE_TEMP_OFFSET 0xBE
+
+/* CC_BASE - 191 */
+#define SFF8636_CC_BASE_OFFSET 0xBF
+
+/* Option Values - 192-195 */
+#define SFF8636_OPTION_1_OFFSET 0xC0
+#define SFF8636_ETHERNET_UNSPECIFIED 0x00
+#define SFF8636_ETHERNET_100G_AOC 0x01
+#define SFF8636_ETHERNET_100G_SR4 0x02
+#define SFF8636_ETHERNET_100G_LR4 0x03
+#define SFF8636_ETHERNET_100G_ER4 0x04
+#define SFF8636_ETHERNET_100G_SR10 0x05
+#define SFF8636_ETHERNET_100G_CWDM4_FEC 0x06
+#define SFF8636_ETHERNET_100G_PSM4 0x07
+#define SFF8636_ETHERNET_100G_ACC 0x08
+#define SFF8636_ETHERNET_100G_CWDM4_NO_FEC 0x09
+#define SFF8636_ETHERNET_100G_RSVD1 0x0A
+#define SFF8636_ETHERNET_100G_CR4 0x0B
+#define SFF8636_ETHERNET_25G_CR_CA_S 0x0C
+#define SFF8636_ETHERNET_25G_CR_CA_N 0x0D
+#define SFF8636_ETHERNET_40G_ER4 0x10
+#define SFF8636_ETHERNET_4X10_SR 0x11
+#define SFF8636_ETHERNET_40G_PSM4 0x12
+#define SFF8636_ETHERNET_G959_P1I1_2D1 0x13
+#define SFF8636_ETHERNET_G959_P1S1_2D2 0x14
+#define SFF8636_ETHERNET_G959_P1L1_2D2 0x15
+#define SFF8636_ETHERNET_10GT_SFI 0x16
+#define SFF8636_ETHERNET_100G_CLR4 0x17
+#define SFF8636_ETHERNET_100G_AOC2 0x18
+#define SFF8636_ETHERNET_100G_ACC2 0x19
+
+#define SFF8636_OPTION_2_OFFSET 0xC1
+/* Rx output amplitude */
+#define SFF8636_O2_RX_OUTPUT_AMP (1 << 0)
+#define SFF8636_OPTION_3_OFFSET 0xC2
+/* Rx Squelch Disable */
+#define SFF8636_O3_RX_SQL_DSBL (1 << 3)
+/* Rx Output Disable capable */
+#define SFF8636_O3_RX_OUTPUT_DSBL (1 << 2)
+/* Tx Squelch Disable */
+#define SFF8636_O3_TX_SQL_DSBL (1 << 1)
+/* Tx Squelch Impl */
+#define SFF8636_O3_TX_SQL_IMPL (1 << 0)
+#define SFF8636_OPTION_4_OFFSET 0xC3
+/* Memory Page 02 present */
+#define SFF8636_O4_PAGE_02_PRESENT (1 << 7)
+/* Memory Page 01 present */
+#define SFF8636_O4_PAGE_01_PRESENT (1 << 6)
+/* Rate Select implemented */
+#define SFF8636_O4_RATE_SELECT (1 << 5)
+/* Tx_DISABLE implemented */
+#define SFF8636_O4_TX_DISABLE (1 << 4)
+/* Tx_FAULT implemented */
+#define SFF8636_O4_TX_FAULT (1 << 3)
+/* Tx Squelch implemented */
+#define SFF8636_O4_TX_SQUELCH (1 << 2)
+/* Tx Loss of Signal */
+#define SFF8636_O4_TX_LOS (1 << 1)
+
+/* Vendor SN - 196-211 */
+#define SFF8636_VENDOR_SN_START_OFFSET 0xC4
+#define SFF8636_VENDOR_SN_END_OFFSET 0xD3
+
+/* Vendor Date - 212-219 */
+#define SFF8636_DATE_YEAR_OFFSET 0xD4
+#define SFF8636_DATE_YEAR_LEN 2
+#define SFF8636_DATE_MONTH_OFFSET 0xD6
+#define SFF8636_DATE_MONTH_LEN 2
+#define SFF8636_DATE_DAY_OFFSET 0xD8
+#define SFF8636_DATE_DAY_LEN 2
+
+/* Diagnostic Monitoring Type - 220 */
+#define SFF8636_DIAG_TYPE_OFFSET 0xDC
+#define SFF8636_RX_PWR_TYPE_MASK 0x8
+#define SFF8636_RX_PWR_TYPE_AVG_PWR (1 << 3)
+#define SFF8636_RX_PWR_TYPE_OMA (0 << 3)
+#define SFF8636_TX_PWR_TYPE_MASK 0x4
+#define SFF8636_TX_PWR_TYPE_AVG_PWR (1 << 2)
+
+/* Enhanced Options - 221 */
+#define SFF8636_ENH_OPTIONS_OFFSET 0xDD
+#define SFF8636_RATE_SELECT_EXT_SUPPORT (1 << 3)
+#define SFF8636_RATE_SELECT_APP_TABLE_SUPPORT (1 << 2)
+
+/* Check code - 223 */
+#define SFF8636_CC_EXT_OFFSET 0xDF
+#define SFF8636_CC_EXT_LEN 1
+
+/*------------------------------------------------------------------------------
+ *
+ * Upper Memory Page 03h
+ * Contains module thresholds, channel thresholds and masks,
+ * and optional channel controls
+ *
+ * Offset - Page Num(3) * PageSize(0x80) + Page offset
+ */
+
+/* Module Thresholds (48 Bytes) 128-175 */
+/* MSB at low address, LSB at high address */
+#define SFF8636_TEMP_HALRM 0x200
+#define SFF8636_TEMP_LALRM 0x202
+#define SFF8636_TEMP_HWARN 0x204
+#define SFF8636_TEMP_LWARN 0x206
+
+#define SFF8636_VCC_HALRM 0x210
+#define SFF8636_VCC_LALRM 0x212
+#define SFF8636_VCC_HWARN 0x214
+#define SFF8636_VCC_LWARN 0x216
+
+#define SFF8636_RX_PWR_HALRM 0x230
+#define SFF8636_RX_PWR_LALRM 0x232
+#define SFF8636_RX_PWR_HWARN 0x234
+#define SFF8636_RX_PWR_LWARN 0x236
+
+#define SFF8636_TX_BIAS_HALRM 0x238
+#define SFF8636_TX_BIAS_LALRM 0x23A
+#define SFF8636_TX_BIAS_HWARN 0x23C
+#define SFF8636_TX_BIAS_LWARN 0x23E
+
+#define SFF8636_TX_PWR_HALRM 0x240
+#define SFF8636_TX_PWR_LALRM 0x242
+#define SFF8636_TX_PWR_HWARN 0x244
+#define SFF8636_TX_PWR_LWARN 0x246
+
+#define ETH_MODULE_SFF_8636_MAX_LEN 640
+#define ETH_MODULE_SFF_8436_MAX_LEN 640
+
+#endif /* QSFP_H__ */
--
2.1.4
Powered by blists - more mailing lists