netdev - Re: [PATCH 2/4] net: phy: Add MAC-IF driver for Microsemi PHYs.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20160824130644.GD13406@lunn.ch>
Date:   Wed, 24 Aug 2016 15:06:44 +0200
From:   Andrew Lunn <andrew@...n.ch>
To:     Raju Lakkaraju <Raju.Lakkaraju@...rosemi.com>
Cc:     "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "f.fainelli@...il.com" <f.fainelli@...il.com>,
        Allan Nielsen <Allan.Nielsen@...rosemi.com>
Subject: Re: [PATCH 2/4] net: phy: Add MAC-IF driver for Microsemi PHYs.

> +static int vsc85xx_mac_if_set(struct phy_device *phydev,
> +                             phy_interface_t   *interface)
> +{
> +       int rc;
> +       u16 reg_val;
> +
> +       mutex_lock(&phydev->lock);
> +       reg_val = phy_read(phydev, MSCC_PHY_EXT_PHY_CNTL_1);
> +       switch (*interface) {
> +       case PHY_INTERFACE_MODE_RGMII:
> +               reg_val &= ~(MAC_IF_SELECTION_MASK);
> +               reg_val |= (MAC_IF_SELECTION_RGMII << MAC_IF_SELECTION_POS);
> +               break;
> +       case PHY_INTERFACE_MODE_RMII:
> +               reg_val &= ~(MAC_IF_SELECTION_MASK);
> +               reg_val |= (MAC_IF_SELECTION_RMII << MAC_IF_SELECTION_POS);
> +               break;
> +       case PHY_INTERFACE_MODE_MII:
> +       case PHY_INTERFACE_MODE_GMII:
> +       default:
> +               reg_val &= ~(MAC_IF_SELECTION_MASK);
> +               reg_val |= (MAC_IF_SELECTION_GMII << MAC_IF_SELECTION_POS);
> +               break;
> +       }
> +       rc = phy_write(phydev, MSCC_PHY_EXT_PHY_CNTL_1, reg_val);
> +       if (rc != 0)
> +               goto out_unlock;
> +
> +       rc = vsc85xx_soft_reset(phydev);
> +
> +out_unlock:
> +       mutex_unlock(&phydev->lock);
> +
> +       return rc;
> +}

Again, you need to justify why you are doing something completely
different to all other phy drivers. You cannot you do what
m88e1121_config_aneg(), mv88e111_config_init(), dp83867_config_init()
does?

	Andrew