netdev - [PATCH 0/2] net: smsc911x: Move phy and interrupt config

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1472747141-15886-1-git-send-email-jeremy.linton@arm.com>
Date:   Thu,  1 Sep 2016 11:25:39 -0500
From:   Jeremy Linton <jeremy.linton@....com>
To:     netdev@...r.kernel.org
Cc:     steve.glendinning@...well.net, sergei.shtylyov@...entembedded.com
Subject: [PATCH 0/2] net: smsc911x: Move phy and interrupt config

Hi,

The smsc911x driver is doing a number of things in its probe routine that
should be delayed until the interface is started. Because of this, the module
cannot be unloaded, the phy states are incorrect/stale if the interface isn't
running, open's unnecessarily fail causing network configuration problems, and
the /proc/irq nodes are incorrectly named.

Clean up a number of these problems by moving the mdio and interrupt
configuration into the smsc911x_open routine.

Jeremy Linton (2):
  net: smsc911x: Fix register_netdev, phy startup, driver unload
    ordering
  net/smsc911x: Move interrupt allocation to open/stop

 drivers/net/ethernet/smsc/smsc911x.c | 89 +++++++++++++++++-------------------
 1 file changed, 42 insertions(+), 47 deletions(-)

-- 
2.5.5