[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAMxnaaUnY5XtXWpYPbeZiXqEJYJ6_RprCPCEwG-_G4NB3PUTNQ@mail.gmail.com>
Date: Sun, 11 Sep 2016 02:02:02 +0200
From: Andreas Noever <andreas.noever@...il.com>
To: Amir Levy <amir.jer.levy@...el.com>
Cc: Greg KH <gregkh@...uxfoundation.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Jonathan Corbet <corbet@....net>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
netdev@...r.kernel.org, linux-doc@...r.kernel.org,
thunderbolt-linux <thunderbolt-linux@...el.com>,
"Westerberg, Mika" <mika.westerberg@...el.com>,
"Winkler, Tomas" <tomas.winkler@...el.com>
Subject: Re: [PATCH v6 2/8] thunderbolt: Updating the register definitions
On Mon, Aug 1, 2016 at 2:23 PM, Amir Levy <amir.jer.levy@...el.com> wrote:
> Adding more Thunderbolt(TM) register definitions
> and some helper macros.
Thinking about this again I would prefer it if you would put your
definitions into a separate file under icm/ (even if there is some
duplication). The style (bitfields vs. genmask) is different between
the drivers and for a reader it is difficult to find out what is
actually supposed to be used by the two drivers (ring_desc vs
tbt_buf_desc or the ring RING_INT_EN/DISABLE macros in the header file
vs. ring_interrupt_active in nhi.c).
This would also completely separate the two drivers.
Andreas
> Signed-off-by: Amir Levy <amir.jer.levy@...el.com>
> ---
> drivers/thunderbolt/nhi_regs.h | 109 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 109 insertions(+)
>
> diff --git a/drivers/thunderbolt/nhi_regs.h b/drivers/thunderbolt/nhi_regs.h
> index 75cf069..b8e961f 100644
> --- a/drivers/thunderbolt/nhi_regs.h
> +++ b/drivers/thunderbolt/nhi_regs.h
> @@ -9,6 +9,11 @@
>
> #include <linux/types.h>
>
> +#define NHI_MMIO_BAR 0
> +
> +#define TBT_RING_MIN_NUM_BUFFERS 2
> +#define TBT_RING_MAX_FRAME_SIZE (4 * 1024)
> +
> enum ring_flags {
> RING_FLAG_ISOCH_ENABLE = 1 << 27, /* TX only? */
> RING_FLAG_E2E_FLOW_CONTROL = 1 << 28,
> @@ -39,6 +44,33 @@ struct ring_desc {
> u32 time; /* write zero */
> } __packed;
>
> +/**
> + * struct tbt_buf_desc - TX/RX ring buffer descriptor.
> + * This is same as struct ring_desc, but without the use of bitfields and
> + * with explicit endianity.
> + */
> +struct tbt_buf_desc {
> + __le64 phys;
> + __le32 attributes;
> + __le32 time;
> +};
> +
> +#define DESC_ATTR_LEN_SHIFT 0
> +#define DESC_ATTR_LEN_MASK GENMASK(11, DESC_ATTR_LEN_SHIFT)
> +#define DESC_ATTR_EOF_SHIFT 12
> +#define DESC_ATTR_EOF_MASK GENMASK(15, DESC_ATTR_EOF_SHIFT)
> +#define DESC_ATTR_SOF_SHIFT 16
> +#define DESC_ATTR_SOF_MASK GENMASK(19, DESC_ATTR_SOF_SHIFT)
> +#define DESC_ATTR_TX_ISOCH_DMA_EN BIT(20) /* TX */
> +#define DESC_ATTR_RX_CRC_ERR BIT(20) /* RX after use */
> +#define DESC_ATTR_DESC_DONE BIT(21)
> +#define DESC_ATTR_REQ_STS BIT(22) /* TX and RX before use */
> +#define DESC_ATTR_RX_BUF_OVRN_ERR BIT(22) /* RX after use */
> +#define DESC_ATTR_INT_EN BIT(23)
> +#define DESC_ATTR_OFFSET_SHIFT 24
> +#define DESC_ATTR_OFFSET_MASK GENMASK(31, DESC_ATTR_OFFSET_SHIFT)
> +
> +
> /* NHI registers in bar 0 */
>
> /*
> @@ -60,6 +92,30 @@ struct ring_desc {
> */
> #define REG_RX_RING_BASE 0x08000
>
> +#define REG_RING_STEP 16
> +#define REG_RING_PHYS_LO_OFFSET 0
> +#define REG_RING_PHYS_HI_OFFSET 4
> +#define REG_RING_CONS_PROD_OFFSET 8 /* cons - RO, prod - RW */
> +#define REG_RING_CONS_SHIFT 0
> +#define REG_RING_CONS_MASK GENMASK(15, REG_RING_CONS_SHIFT)
> +#define REG_RING_PROD_SHIFT 16
> +#define REG_RING_PROD_MASK GENMASK(31, REG_RING_PROD_SHIFT)
> +#define REG_RING_SIZE_OFFSET 12
> +#define REG_RING_SIZE_SHIFT 0
> +#define REG_RING_SIZE_MASK GENMASK(15, REG_RING_SIZE_SHIFT)
> +#define REG_RING_BUF_SIZE_SHIFT 16
> +#define REG_RING_BUF_SIZE_MASK GENMASK(27, REG_RING_BUF_SIZE_SHIFT)
> +
> +#define TBT_RING_CONS_PROD_REG(iobase, ringbase, ringnumber) \
> + ((iobase) + (ringbase) + \
> + ((ringnumber) * REG_RING_STEP) + \
> + REG_RING_CONS_PROD_OFFSET)
> +
> +#define TBT_REG_RING_PROD_EXTRACT(val) (((val) & REG_RING_PROD_MASK) >> \
> + REG_RING_PROD_SHIFT)
> +
> +#define TBT_REG_RING_CONS_EXTRACT(val) (((val) & REG_RING_CONS_MASK) >> \
> + REG_RING_CONS_SHIFT)
> /*
> * 32 bytes per entry, one entry for every hop (REG_HOP_COUNT)
> * 00: enum_ring_flags
> @@ -77,6 +133,19 @@ struct ring_desc {
> * ..: unknown
> */
> #define REG_RX_OPTIONS_BASE 0x29800
> +#define REG_RX_OPTS_TX_E2E_HOP_ID_SHIFT 12
> +#define REG_RX_OPTS_TX_E2E_HOP_ID_MASK \
> + GENMASK(22, REG_RX_OPTS_TX_E2E_HOP_ID_SHIFT)
> +#define REG_RX_OPTS_MASK_OFFSET 4
> +#define REG_RX_OPTS_MASK_EOF_SHIFT 0
> +#define REG_RX_OPTS_MASK_EOF_MASK GENMASK(15, REG_RX_OPTS_MASK_EOF_SHIFT)
> +#define REG_RX_OPTS_MASK_SOF_SHIFT 16
> +#define REG_RX_OPTS_MASK_SOF_MASK GENMASK(31, REG_RX_OPTS_MASK_SOF_SHIFT)
> +
> +#define REG_OPTS_STEP 32
> +#define REG_OPTS_E2E_EN BIT(28)
> +#define REG_OPTS_RAW BIT(30)
> +#define REG_OPTS_VALID BIT(31)
>
> /*
> * three bitfields: tx, rx, rx overflow
> @@ -86,6 +155,7 @@ struct ring_desc {
> */
> #define REG_RING_NOTIFY_BASE 0x37800
> #define RING_NOTIFY_REG_COUNT(nhi) ((31 + 3 * nhi->hop_count) / 32)
> +#define REG_RING_NOTIFY_STEP 4
>
> /*
> * two bitfields: rx, tx
> @@ -94,8 +164,47 @@ struct ring_desc {
> */
> #define REG_RING_INTERRUPT_BASE 0x38200
> #define RING_INTERRUPT_REG_COUNT(nhi) ((31 + 2 * nhi->hop_count) / 32)
> +#define REG_RING_INT_TX_PROCESSED(ring_num) BIT(ring_num)
> +#define REG_RING_INT_RX_PROCESSED(ring_num, num_paths) BIT((ring_num) + \
> + (num_paths))
> +#define RING_INT_DISABLE(base, val) iowrite32( \
> + ioread32((base) + REG_RING_INTERRUPT_BASE) & ~(val), \
> + (base) + REG_RING_INTERRUPT_BASE)
> +#define RING_INT_ENABLE(base, val) iowrite32( \
> + ioread32((base) + REG_RING_INTERRUPT_BASE) | (val), \
> + (base) + REG_RING_INTERRUPT_BASE)
> +#define RING_INT_DISABLE_TX(base, ring_num) \
> + RING_INT_DISABLE(base, REG_RING_INT_TX_PROCESSED(ring_num))
> +#define RING_INT_DISABLE_RX(base, ring_num, num_paths) \
> + RING_INT_DISABLE(base, REG_RING_INT_RX_PROCESSED(ring_num, num_paths))
> +#define RING_INT_ENABLE_TX(base, ring_num) \
> + RING_INT_ENABLE(base, REG_RING_INT_TX_PROCESSED(ring_num))
> +#define RING_INT_ENABLE_RX(base, ring_num, num_paths) \
> + RING_INT_ENABLE(base, REG_RING_INT_RX_PROCESSED(ring_num, num_paths))
> +#define RING_INT_DISABLE_TX_RX(base, ring_num, num_paths) \
> + RING_INT_DISABLE(base, REG_RING_INT_TX_PROCESSED(ring_num) | \
> + REG_RING_INT_RX_PROCESSED(ring_num, num_paths))
> +
> +#define REG_RING_INTERRUPT_STEP 4
> +
> +#define REG_INT_THROTTLING_RATE 0x38c00
> +#define REG_INT_THROTTLING_RATE_STEP 4
> +#define NUM_INT_VECTORS 16
> +
> +#define REG_INT_VEC_ALLOC_BASE 0x38c40
> +#define REG_INT_VEC_ALLOC_STEP 4
> +#define REG_INT_VEC_ALLOC_FIELD_BITS 4
> +#define REG_INT_VEC_ALLOC_FIELD_MASK (BIT(REG_INT_VEC_ALLOC_FIELD_BITS) - 1)
> +#define REG_INT_VEC_ALLOC_PER_REG ((BITS_PER_BYTE * sizeof(u32)) / \
> + REG_INT_VEC_ALLOC_FIELD_BITS)
>
> /* The last 11 bits contain the number of hops supported by the NHI port. */
> #define REG_HOP_COUNT 0x39640
> +#define REG_HOP_COUNT_TOTAL_PATHS_MASK GENMASK(10, 0)
> +
> +#define REG_HOST_INTERFACE_RST 0x39858
> +
> +#define REG_DMA_MISC 0x39864
> +#define REG_DMA_MISC_INT_AUTO_CLEAR BIT(2)
>
> #endif
> --
> 2.7.4
>
Powered by blists - more mailing lists