| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20160914140304.GA27639@Red>
Date: Wed, 14 Sep 2016 16:03:04 +0200
From: LABBE Corentin <clabbe.montjoie@...il.com>
To: Maxime Ripard <maxime.ripard@...e-electrons.com>
Cc: robh+dt@...nel.org, mark.rutland@....com, wens@...e.org,
linux@...linux.org.uk, davem@...emloft.net, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [RFC PATCH 9/9] ethernet: sun8i-emac: add pm_runtime support
On Mon, Sep 12, 2016 at 10:44:51PM +0200, Maxime Ripard wrote:
> Hi,
>
> On Fri, Sep 09, 2016 at 02:45:17PM +0200, Corentin Labbe wrote:
> > This patch add pm_runtime support to sun8i-emac.
> > For the moment, only basic support is added, (the device is marked as
> > used when net/open)
> >
> > Signed-off-by: Corentin Labbe <clabbe.montjoie@...il.com>
> > ---
> > drivers/net/ethernet/allwinner/sun8i-emac.c | 62 ++++++++++++++++++++++++++++-
> > 1 file changed, 60 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/allwinner/sun8i-emac.c b/drivers/net/ethernet/allwinner/sun8i-emac.c
> > index 1c4bc80..cce886e 100644
> > --- a/drivers/net/ethernet/allwinner/sun8i-emac.c
> > +++ b/drivers/net/ethernet/allwinner/sun8i-emac.c
> > @@ -9,7 +9,6 @@
> > * - MAC filtering
> > * - Jumbo frame
> > * - features rx-all (NETIF_F_RXALL_BIT)
> > - * - PM runtime
> > */
> > #include <linux/bitops.h>
> > #include <linux/clk.h>
> > @@ -27,6 +26,7 @@
> > #include <linux/pinctrl/consumer.h>
> > #include <linux/pinctrl/pinctrl.h>
> > #include <linux/platform_device.h>
> > +#include <linux/pm_runtime.h>
> > #include <linux/reset.h>
> > #include <linux/scatterlist.h>
> > #include <linux/skbuff.h>
> > @@ -1301,11 +1301,18 @@ static int sun8i_emac_open(struct net_device *ndev)
> > int err;
> > u32 v;
> >
> > + err = pm_runtime_get_sync(priv->dev);
> > + if (err) {
> > + pm_runtime_put_noidle(priv->dev);
> > + dev_err(priv->dev, "pm_runtime error: %d\n", err);
> > + return err;
> > + }
> > +
> > err = request_irq(priv->irq, sun8i_emac_dma_interrupt, 0,
> > dev_name(priv->dev), ndev);
> > if (err) {
> > dev_err(priv->dev, "Cannot request IRQ: %d\n", err);
> > - return err;
> > + goto err_runtime;
> > }
> >
> > /* Set interface mode (and configure internal PHY on H3) */
> > @@ -1395,6 +1402,8 @@ err_syscon:
> > sun8i_emac_unset_syscon(ndev);
> > err_irq:
> > free_irq(priv->irq, ndev);
> > +err_runtime:
> > + pm_runtime_put(priv->dev);
> > return err;
> > }
> >
> > @@ -1483,6 +1492,8 @@ static int sun8i_emac_stop(struct net_device *ndev)
> > dma_free_coherent(priv->dev, priv->nbdesc_tx * sizeof(struct dma_desc),
> > priv->dd_tx, priv->dd_tx_phy);
> >
> > + pm_runtime_put(priv->dev);
> > +
> > return 0;
> > }
> >
> > @@ -2210,6 +2221,8 @@ static int sun8i_emac_probe(struct platform_device *pdev)
> > goto probe_err;
> > }
> >
> > + pm_runtime_enable(priv->dev);
> > +
> > return 0;
> >
> > probe_err:
> > @@ -2221,6 +2234,8 @@ static int sun8i_emac_remove(struct platform_device *pdev)
> > {
> > struct net_device *ndev = platform_get_drvdata(pdev);
> >
> > + pm_runtime_disable(&pdev->dev);
> > +
> > unregister_netdev(ndev);
> > platform_set_drvdata(pdev, NULL);
> > free_netdev(ndev);
> > @@ -2228,6 +2243,47 @@ static int sun8i_emac_remove(struct platform_device *pdev)
> > return 0;
> > }
> >
> > +static int __maybe_unused sun8i_emac_suspend(struct platform_device *pdev, pm_message_t state)
> > +{
> > + struct net_device *ndev = platform_get_drvdata(pdev);
> > + struct sun8i_emac_priv *priv = netdev_priv(ndev);
> > +
> > + napi_disable(&priv->napi);
> > +
> > + if (netif_running(ndev))
> > + netif_device_detach(ndev);
> > +
> > + sun8i_emac_stop_tx(ndev);
> > + sun8i_emac_stop_rx(ndev);
> > +
> > + sun8i_emac_rx_clean(ndev);
> > + sun8i_emac_tx_clean(ndev);
> > +
> > + phy_stop(ndev->phydev);
> > +
> > + return 0;
> > +}
> > +
> > +static int __maybe_unused sun8i_emac_resume(struct platform_device *pdev)
> > +{
> > + struct net_device *ndev = platform_get_drvdata(pdev);
> > + struct sun8i_emac_priv *priv = netdev_priv(ndev);
> > +
> > + phy_start(ndev->phydev);
> > +
> > + sun8i_emac_start_tx(ndev);
> > + sun8i_emac_start_rx(ndev);
> > +
> > + if (netif_running(ndev))
> > + netif_device_attach(ndev);
> > +
> > + netif_start_queue(ndev);
> > +
> > + napi_enable(&priv->napi);
> > +
> > + return 0;
> > +}
>
> The main idea behind the runtime PM hooks is that they bring the
> device to a working state and shuts it down when it's not needed
> anymore.
>
I expect that the first part (all pm_runtime_xxx) of the patch bring that.
When the interface is not opened:
cat /sys/devices/platform/soc/1c30000.ethernet/power/runtime_status
suspended
> However, they shouldn't be called when the device is still in used, so
> all the mangling with NAPI, the phy and so on is irrelevant here, but
> the clocks, resets, for example, are.
>
I do the same as other ethernet driver for suspend/resume.
> > static const struct of_device_id sun8i_emac_of_match_table[] = {
> > { .compatible = "allwinner,sun8i-a83t-emac",
> > .data = &emac_variant_a83t },
> > @@ -2246,6 +2302,8 @@ static struct platform_driver sun8i_emac_driver = {
> > .name = "sun8i-emac",
> > .of_match_table = sun8i_emac_of_match_table,
> > },
> > + .suspend = sun8i_emac_suspend,
> > + .resume = sun8i_emac_resume,
>
> These are not the runtime PM hooks. How did you test that?
>
Anyway I didnt test suspend/resume so I will remove it until I successfully found how to hibernate my board.
Thanks
Regards
Corentin Labbe
Powered by blists - more mailing lists