| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1473969632-2408261-4-git-send-email-ast@fb.com>
Date: Thu, 15 Sep 2016 13:00:31 -0700
From: Alexei Starovoitov <ast@...com>
To: "David S . Miller" <davem@...emloft.net>
CC: Daniel Borkmann <daniel@...earbox.net>,
Thomas Graf <tgraf@...g.ch>, <netdev@...r.kernel.org>,
<kernel-team@...com>
Subject: [PATCH net-next 3/4] samples/bpf: extend test_tunnel_bpf.sh with IPIP test
extend existing tests for vxlan, geneve, gre to include IPIP tunnel.
It tests both traditional tunnel configuration and
dynamic via bpf helpers.
Signed-off-by: Alexei Starovoitov <ast@...nel.org>
---
samples/bpf/tcbpf2_kern.c | 58 ++++++++++++++++++++++++++++++++++++++++++
samples/bpf/test_tunnel_bpf.sh | 56 ++++++++++++++++++++++++++++++++++------
2 files changed, 106 insertions(+), 8 deletions(-)
diff --git a/samples/bpf/tcbpf2_kern.c b/samples/bpf/tcbpf2_kern.c
index 7a15289da6cc..c1917d968fb4 100644
--- a/samples/bpf/tcbpf2_kern.c
+++ b/samples/bpf/tcbpf2_kern.c
@@ -1,4 +1,5 @@
/* Copyright (c) 2016 VMware
+ * Copyright (c) 2016 Facebook
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public
@@ -188,4 +189,61 @@ int _geneve_get_tunnel(struct __sk_buff *skb)
return TC_ACT_OK;
}
+SEC("ipip_set_tunnel")
+int _ipip_set_tunnel(struct __sk_buff *skb)
+{
+ struct bpf_tunnel_key key = {};
+ void *data = (void *)(long)skb->data;
+ struct iphdr *iph = data;
+ struct tcphdr *tcp = data + sizeof(*iph);
+ void *data_end = (void *)(long)skb->data_end;
+ int ret;
+
+ /* single length check */
+ if (data + sizeof(*iph) + sizeof(*tcp) > data_end) {
+ ERROR(1);
+ return TC_ACT_SHOT;
+ }
+
+ key.tunnel_ttl = 64;
+ if (iph->protocol == IPPROTO_ICMP) {
+ key.remote_ipv4 = 0xac100164; /* 172.16.1.100 */
+ } else {
+ if (iph->protocol != IPPROTO_TCP || iph->ihl != 5)
+ return TC_ACT_SHOT;
+
+ if (tcp->dest == htons(5200))
+ key.remote_ipv4 = 0xac100164; /* 172.16.1.100 */
+ else if (tcp->dest == htons(5201))
+ key.remote_ipv4 = 0xac100165; /* 172.16.1.101 */
+ else
+ return TC_ACT_SHOT;
+ }
+
+ ret = bpf_skb_set_tunnel_key(skb, &key, sizeof(key), 0);
+ if (ret < 0) {
+ ERROR(ret);
+ return TC_ACT_SHOT;
+ }
+
+ return TC_ACT_OK;
+}
+
+SEC("ipip_get_tunnel")
+int _ipip_get_tunnel(struct __sk_buff *skb)
+{
+ int ret;
+ struct bpf_tunnel_key key;
+ char fmt[] = "remote ip 0x%x\n";
+
+ ret = bpf_skb_get_tunnel_key(skb, &key, sizeof(key), 0);
+ if (ret < 0) {
+ ERROR(ret);
+ return TC_ACT_SHOT;
+ }
+
+ bpf_trace_printk(fmt, sizeof(fmt), key.remote_ipv4);
+ return TC_ACT_OK;
+}
+
char _license[] SEC("license") = "GPL";
diff --git a/samples/bpf/test_tunnel_bpf.sh b/samples/bpf/test_tunnel_bpf.sh
index 4956589a83ae..1ff634f187b7 100755
--- a/samples/bpf/test_tunnel_bpf.sh
+++ b/samples/bpf/test_tunnel_bpf.sh
@@ -9,15 +9,13 @@
# local 172.16.1.200 remote 172.16.1.100
# veth1 IP: 172.16.1.200, tunnel dev <type>11
-set -e
-
function config_device {
ip netns add at_ns0
ip link add veth0 type veth peer name veth1
ip link set veth0 netns at_ns0
ip netns exec at_ns0 ip addr add 172.16.1.100/24 dev veth0
ip netns exec at_ns0 ip link set dev veth0 up
- ip link set dev veth1 up
+ ip link set dev veth1 up mtu 1500
ip addr add dev veth1 172.16.1.200/24
}
@@ -67,6 +65,19 @@ function add_geneve_tunnel {
ip addr add dev $DEV 10.1.1.200/24
}
+function add_ipip_tunnel {
+ # in namespace
+ ip netns exec at_ns0 \
+ ip link add dev $DEV_NS type $TYPE local 172.16.1.100 remote 172.16.1.200
+ ip netns exec at_ns0 ip link set dev $DEV_NS up
+ ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
+
+ # out of namespace
+ ip link add dev $DEV type $TYPE external
+ ip link set dev $DEV up
+ ip addr add dev $DEV 10.1.1.200/24
+}
+
function attach_bpf {
DEV=$1
SET_TUNNEL=$2
@@ -85,6 +96,7 @@ function test_gre {
attach_bpf $DEV gre_set_tunnel gre_get_tunnel
ping -c 1 10.1.1.100
ip netns exec at_ns0 ping -c 1 10.1.1.200
+ cleanup
}
function test_vxlan {
@@ -96,6 +108,7 @@ function test_vxlan {
attach_bpf $DEV vxlan_set_tunnel vxlan_get_tunnel
ping -c 1 10.1.1.100
ip netns exec at_ns0 ping -c 1 10.1.1.200
+ cleanup
}
function test_geneve {
@@ -107,21 +120,48 @@ function test_geneve {
attach_bpf $DEV geneve_set_tunnel geneve_get_tunnel
ping -c 1 10.1.1.100
ip netns exec at_ns0 ping -c 1 10.1.1.200
+ cleanup
+}
+
+function test_ipip {
+ TYPE=ipip
+ DEV_NS=ipip00
+ DEV=ipip11
+ config_device
+ tcpdump -nei veth1 &
+ cat /sys/kernel/debug/tracing/trace_pipe &
+ add_ipip_tunnel
+ ethtool -K veth1 gso off gro off rx off tx off
+ ip link set dev veth1 mtu 1500
+ attach_bpf $DEV ipip_set_tunnel ipip_get_tunnel
+ ping -c 1 10.1.1.100
+ ip netns exec at_ns0 ping -c 1 10.1.1.200
+ ip netns exec at_ns0 iperf -sD -p 5200 > /dev/null
+ sleep 0.2
+ iperf -c 10.1.1.100 -n 5k -p 5200
+ cleanup
}
function cleanup {
+ set +ex
+ pkill iperf
ip netns delete at_ns0
ip link del veth1
- ip link del $DEV
+ ip link del ipip11
+ ip link del gretap11
+ ip link del geneve11
+ pkill tcpdump
+ pkill cat
+ set -ex
}
+cleanup
echo "Testing GRE tunnel..."
test_gre
-cleanup
echo "Testing VXLAN tunnel..."
test_vxlan
-cleanup
echo "Testing GENEVE tunnel..."
test_geneve
-cleanup
-echo "Success"
+echo "Testing IPIP tunnel..."
+test_ipip
+echo "*** PASS ***"
--
2.8.0
Powered by blists - more mailing lists