| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1473949601-20674-4-git-send-email-john@phrozen.org>
Date: Thu, 15 Sep 2016 16:26:41 +0200
From: John Crispin <john@...ozen.org>
To: "David S. Miller" <davem@...emloft.net>,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>
Cc: linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
qsdk-review@....qualcomm.com, John Crispin <john@...ozen.org>
Subject: [PATCH V3 3/3] net-next: dsa: add new driver for qca8xxx family
This patch contains initial support for the QCA8337 switch. It
will detect a QCA8337 switch, if present and declared in the DT.
Each port will be represented through a standalone net_device interface,
as for other DSA switches. CPU can communicate with any of the ports by
setting an IP@ on ethN interface. Most of the extra callbacks of the DSA
subsystem are already supported, such as bridge offloading, stp, fdb.
Signed-off-by: John Crispin <john@...ozen.org>
---
Changes in V2
* add proper locking for the FDB table
* remove udelay when changing the page. neither datasheet nore SDK code
requires a sleep
* add a cond_resched to the busy wait loop
* use nested locking when accessing the mdio bus
* remove the phy_to_port() wrappers
* remove mmd access function and use existing phy helpers
* fix a copy/paste bug breaking the eee callbacks
* use default vid 1 when fdb entries are added fro vid 0
* remove the phy id check and add a switch id check instead
* add error handling to the mdio read/write functions
* remove inline usage
Changes in V3
* remove qca8k_to_priv() helper
* turn fdb mutex into a generic register mutex
* verify that port0 is the cpu port
* flush MIB counters on startup
* more PHY->port
* implement fdb_prepare properly
* power ports up/down on PM event and shutdown
drivers/net/dsa/Kconfig | 9 +
drivers/net/dsa/Makefile | 1 +
drivers/net/dsa/qca8k.c | 1060 ++++++++++++++++++++++++++++++++++++++++++++++
drivers/net/dsa/qca8k.h | 185 ++++++++
4 files changed, 1255 insertions(+)
create mode 100644 drivers/net/dsa/qca8k.c
create mode 100644 drivers/net/dsa/qca8k.h
diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index de6d044..0659846 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -25,4 +25,13 @@ source "drivers/net/dsa/b53/Kconfig"
source "drivers/net/dsa/mv88e6xxx/Kconfig"
+config NET_DSA_QCA8K
+ tristate "Qualcomm Atheros QCA8K Ethernet switch family support"
+ depends on NET_DSA
+ select NET_DSA_TAG_QCA
+ select REGMAP
+ ---help---
+ This enables support for the Qualcomm Atheros QCA8K Ethernet
+ switch chips.
+
endmenu
diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile
index ca1e71b..8346e4f 100644
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
@@ -1,5 +1,6 @@
obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm_sf2.o
+obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o
obj-y += b53/
obj-y += mv88e6xxx/
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
new file mode 100644
index 0000000..7f3f178
--- /dev/null
+++ b/drivers/net/dsa/qca8k.c
@@ -0,0 +1,1060 @@
+/*
+ * Copyright (C) 2009 Felix Fietkau <nbd@....name>
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@...nwrt.org>
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2016 John Crispin <john@...ozen.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/netdevice.h>
+#include <net/dsa.h>
+#include <net/switchdev.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+#include <linux/if_bridge.h>
+#include <linux/mdio.h>
+#include <linux/etherdevice.h>
+
+#include "qca8k.h"
+
+#define MIB_DESC(_s, _o, _n) \
+ { \
+ .size = (_s), \
+ .offset = (_o), \
+ .name = (_n), \
+ }
+
+static const struct qca8k_mib_desc ar8327_mib[] = {
+ MIB_DESC(1, 0x00, "RxBroad"),
+ MIB_DESC(1, 0x04, "RxPause"),
+ MIB_DESC(1, 0x08, "RxMulti"),
+ MIB_DESC(1, 0x0c, "RxFcsErr"),
+ MIB_DESC(1, 0x10, "RxAlignErr"),
+ MIB_DESC(1, 0x14, "RxRunt"),
+ MIB_DESC(1, 0x18, "RxFragment"),
+ MIB_DESC(1, 0x1c, "Rx64Byte"),
+ MIB_DESC(1, 0x20, "Rx128Byte"),
+ MIB_DESC(1, 0x24, "Rx256Byte"),
+ MIB_DESC(1, 0x28, "Rx512Byte"),
+ MIB_DESC(1, 0x2c, "Rx1024Byte"),
+ MIB_DESC(1, 0x30, "Rx1518Byte"),
+ MIB_DESC(1, 0x34, "RxMaxByte"),
+ MIB_DESC(1, 0x38, "RxTooLong"),
+ MIB_DESC(2, 0x3c, "RxGoodByte"),
+ MIB_DESC(2, 0x44, "RxBadByte"),
+ MIB_DESC(1, 0x4c, "RxOverFlow"),
+ MIB_DESC(1, 0x50, "Filtered"),
+ MIB_DESC(1, 0x54, "TxBroad"),
+ MIB_DESC(1, 0x58, "TxPause"),
+ MIB_DESC(1, 0x5c, "TxMulti"),
+ MIB_DESC(1, 0x60, "TxUnderRun"),
+ MIB_DESC(1, 0x64, "Tx64Byte"),
+ MIB_DESC(1, 0x68, "Tx128Byte"),
+ MIB_DESC(1, 0x6c, "Tx256Byte"),
+ MIB_DESC(1, 0x70, "Tx512Byte"),
+ MIB_DESC(1, 0x74, "Tx1024Byte"),
+ MIB_DESC(1, 0x78, "Tx1518Byte"),
+ MIB_DESC(1, 0x7c, "TxMaxByte"),
+ MIB_DESC(1, 0x80, "TxOverSize"),
+ MIB_DESC(2, 0x84, "TxByte"),
+ MIB_DESC(1, 0x8c, "TxCollision"),
+ MIB_DESC(1, 0x90, "TxAbortCol"),
+ MIB_DESC(1, 0x94, "TxMultiCol"),
+ MIB_DESC(1, 0x98, "TxSingleCol"),
+ MIB_DESC(1, 0x9c, "TxExcDefer"),
+ MIB_DESC(1, 0xa0, "TxDefer"),
+ MIB_DESC(1, 0xa4, "TxLateCol"),
+};
+
+/* The 32bit switch registers are accessed indirectly. To achieve this we need
+ * to set the page of the register. Track the last page that was set to reduce
+ * mdio writes
+ */
+static u16 qca8k_current_page = 0xffff;
+
+static void
+qca8k_split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
+{
+ regaddr >>= 1;
+ *r1 = regaddr & 0x1e;
+
+ regaddr >>= 5;
+ *r2 = regaddr & 0x7;
+
+ regaddr >>= 3;
+ *page = regaddr & 0x3ff;
+}
+
+static u32
+qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum)
+{
+ u32 val;
+ int ret;
+
+ ret = bus->read(bus, phy_id, regnum);
+ if (ret >= 0) {
+ val = ret;
+ ret = bus->read(bus, phy_id, regnum + 1);
+ val |= ret << 16;
+ }
+
+ if (ret < 0) {
+ dev_err_ratelimited(&bus->dev,
+ "failed to read qca8k 32bit register\n");
+ return ret;
+ }
+
+ return val;
+}
+
+static void
+qca8k_mii_write32(struct mii_bus *bus, int phy_id, u32 regnum, u32 val)
+{
+ u16 lo, hi;
+ int ret;
+
+ lo = val & 0xffff;
+ hi = (u16)(val >> 16);
+
+ ret = bus->write(bus, phy_id, regnum, lo);
+ if (ret >= 0)
+ ret = bus->write(bus, phy_id, regnum + 1, hi);
+ if (ret < 0)
+ dev_err_ratelimited(&bus->dev,
+ "failed to write qca8k 32bit register\n");
+}
+
+static void
+qca8k_set_page(struct mii_bus *bus, u16 page)
+{
+ if (page == qca8k_current_page)
+ return;
+
+ if (bus->write(bus, 0x18, 0, page) < 0)
+ dev_err_ratelimited(&bus->dev,
+ "failed to set qca8k page\n");
+ qca8k_current_page = page;
+}
+
+static u32
+qca8k_read(struct qca8k_priv *priv, u32 reg)
+{
+ u16 r1, r2, page;
+ u32 val;
+
+ qca8k_split_addr(reg, &r1, &r2, &page);
+
+ mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
+
+ qca8k_set_page(priv->bus, page);
+ val = qca8k_mii_read32(priv->bus, 0x10 | r2, r1);
+
+ mutex_unlock(&priv->bus->mdio_lock);
+
+ return val;
+}
+
+static void
+qca8k_write(struct qca8k_priv *priv, u32 reg, u32 val)
+{
+ u16 r1, r2, page;
+
+ qca8k_split_addr(reg, &r1, &r2, &page);
+
+ mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
+
+ qca8k_set_page(priv->bus, page);
+ qca8k_mii_write32(priv->bus, 0x10 | r2, r1, val);
+
+ mutex_unlock(&priv->bus->mdio_lock);
+}
+
+static u32
+qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 val)
+{
+ u16 r1, r2, page;
+ u32 ret;
+
+ qca8k_split_addr(reg, &r1, &r2, &page);
+
+ mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
+
+ qca8k_set_page(priv->bus, page);
+ ret = qca8k_mii_read32(priv->bus, 0x10 | r2, r1);
+ ret &= ~mask;
+ ret |= val;
+ qca8k_mii_write32(priv->bus, 0x10 | r2, r1, ret);
+
+ mutex_unlock(&priv->bus->mdio_lock);
+
+ return ret;
+}
+
+static void
+qca8k_reg_set(struct qca8k_priv *priv, u32 reg, u32 val)
+{
+ qca8k_rmw(priv, reg, 0, val);
+}
+
+static void
+qca8k_reg_clear(struct qca8k_priv *priv, u32 reg, u32 val)
+{
+ qca8k_rmw(priv, reg, val, 0);
+}
+
+static int
+qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
+
+ *val = qca8k_read(priv, reg);
+
+ return 0;
+}
+
+static int
+qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
+
+ qca8k_write(priv, reg, val);
+
+ return 0;
+}
+
+static const struct regmap_range qca8k_readable_ranges[] = {
+ regmap_reg_range(0x0000, 0x00e4), /* Global control */
+ regmap_reg_range(0x0100, 0x0168), /* EEE control */
+ regmap_reg_range(0x0200, 0x0270), /* Parser control */
+ regmap_reg_range(0x0400, 0x0454), /* ACL */
+ regmap_reg_range(0x0600, 0x0718), /* Lookup */
+ regmap_reg_range(0x0800, 0x0b70), /* QM */
+ regmap_reg_range(0x0c00, 0x0c80), /* PKT */
+ regmap_reg_range(0x0e00, 0x0e98), /* L3 */
+ regmap_reg_range(0x1000, 0x10ac), /* MIB - Port0 */
+ regmap_reg_range(0x1100, 0x11ac), /* MIB - Port1 */
+ regmap_reg_range(0x1200, 0x12ac), /* MIB - Port2 */
+ regmap_reg_range(0x1300, 0x13ac), /* MIB - Port3 */
+ regmap_reg_range(0x1400, 0x14ac), /* MIB - Port4 */
+ regmap_reg_range(0x1500, 0x15ac), /* MIB - Port5 */
+ regmap_reg_range(0x1600, 0x16ac), /* MIB - Port6 */
+
+};
+
+static struct regmap_access_table qca8k_readable_table = {
+ .yes_ranges = qca8k_readable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(qca8k_readable_ranges),
+};
+
+struct regmap_config qca8k_regmap_config = {
+ .reg_bits = 16,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = 0x16ac, /* end MIB - Port6 range */
+ .reg_read = qca8k_regmap_read,
+ .reg_write = qca8k_regmap_write,
+ .rd_table = &qca8k_readable_table,
+};
+
+static int
+qca8k_busy_wait(struct qca8k_priv *priv, u32 reg, u32 mask)
+{
+ unsigned long timeout;
+
+ timeout = jiffies + msecs_to_jiffies(20);
+
+ /* loop until the busy flag has cleared */
+ do {
+ u32 val = qca8k_read(priv, reg);
+ int busy = val & mask;
+
+ if (!busy)
+ break;
+ cond_resched();
+ } while (!time_after_eq(jiffies, timeout));
+
+ return time_after_eq(jiffies, timeout);
+}
+
+static void
+qca8k_fdb_read(struct qca8k_priv *priv, struct qca8k_fdb *fdb)
+{
+ u32 reg[4];
+ int i;
+
+ /* load the ARL table into an array */
+ for (i = 0; i < 4; i++)
+ reg[i] = qca8k_read(priv, QCA8K_REG_ATU_DATA0 + (i * 4));
+
+ /* vid - 83:72 */
+ fdb->vid = (reg[2] >> QCA8K_ATU_VID_S) & QCA8K_ATU_VID_M;
+ /* aging - 67:64 */
+ fdb->aging = reg[2] & QCA8K_ATU_STATUS_M;
+ /* portmask - 54:48 */
+ fdb->port_mask = (reg[1] >> QCA8K_ATU_PORT_S) & QCA8K_ATU_PORT_M;
+ /* mac - 47:0 */
+ fdb->mac[0] = (reg[1] >> QCA8K_ATU_ADDR0_S) & 0xff;
+ fdb->mac[1] = reg[1] & 0xff;
+ fdb->mac[2] = (reg[0] >> QCA8K_ATU_ADDR2_S) & 0xff;
+ fdb->mac[3] = (reg[0] >> QCA8K_ATU_ADDR3_S) & 0xff;
+ fdb->mac[4] = (reg[0] >> QCA8K_ATU_ADDR4_S) & 0xff;
+ fdb->mac[5] = reg[0] & 0xff;
+}
+
+static void
+qca8k_fdb_write(struct qca8k_priv *priv, u16 vid, u8 port_mask, const u8 *mac,
+ u8 aging)
+{
+ u32 reg[3] = { 0 };
+ int i;
+
+ /* vid - 83:72 */
+ reg[2] = (vid & QCA8K_ATU_VID_M) << QCA8K_ATU_VID_S;
+ /* aging - 67:64 */
+ reg[2] |= aging & QCA8K_ATU_STATUS_M;
+ /* portmask - 54:48 */
+ reg[1] = (port_mask & QCA8K_ATU_PORT_M) << QCA8K_ATU_PORT_S;
+ /* mac - 47:0 */
+ reg[1] |= mac[0] << QCA8K_ATU_ADDR0_S;
+ reg[1] |= mac[1];
+ reg[0] |= mac[2] << QCA8K_ATU_ADDR2_S;
+ reg[0] |= mac[3] << QCA8K_ATU_ADDR3_S;
+ reg[0] |= mac[4] << QCA8K_ATU_ADDR4_S;
+ reg[0] |= mac[5];
+
+ /* load the array into the ARL table */
+ for (i = 0; i < 3; i++)
+ qca8k_write(priv, QCA8K_REG_ATU_DATA0 + (i * 4), reg[i]);
+}
+
+static int
+qca8k_fdb_access(struct qca8k_priv *priv, enum qca8k_fdb_cmd cmd, int port)
+{
+ u32 reg;
+
+ /* Set the command and FDB index */
+ reg = QCA8K_ATU_FUNC_BUSY;
+ reg |= cmd;
+ if (port >= 0) {
+ reg |= QCA8K_ATU_FUNC_PORT_EN;
+ reg |= (port & QCA8K_ATU_FUNC_PORT_M) << QCA8K_ATU_FUNC_PORT_S;
+ }
+
+ /* Write the function register triggering the table access */
+ qca8k_write(priv, QCA8K_REG_ATU_FUNC, reg);
+
+ /* wait for completion */
+ if (qca8k_busy_wait(priv, QCA8K_REG_ATU_FUNC, QCA8K_ATU_FUNC_BUSY))
+ return -1;
+
+ /* Check for table full violation when adding an entry */
+ if (cmd == QCA8K_FDB_LOAD) {
+ reg = qca8k_read(priv, QCA8K_REG_ATU_FUNC);
+ if (reg & QCA8K_ATU_FUNC_FULL)
+ return -1;
+ }
+
+ return 0;
+}
+
+static int
+qca8k_fdb_next(struct qca8k_priv *priv, struct qca8k_fdb *fdb, int port)
+{
+ int ret;
+
+ qca8k_fdb_write(priv, fdb->vid, fdb->port_mask, fdb->mac, fdb->aging);
+ ret = qca8k_fdb_access(priv, QCA8K_FDB_NEXT, port);
+ if (ret >= 0)
+ qca8k_fdb_read(priv, fdb);
+
+ return ret;
+}
+
+static int
+qca8k_fdb_add(struct qca8k_priv *priv, const u8 *mac, u16 port_mask,
+ u16 vid, u8 aging)
+{
+ int ret;
+
+ mutex_lock(&priv->reg_mutex);
+ qca8k_fdb_write(priv, vid, port_mask, mac, aging);
+ ret = qca8k_fdb_access(priv, QCA8K_FDB_LOAD, -1);
+ mutex_unlock(&priv->reg_mutex);
+
+ return ret;
+}
+
+static int
+qca8k_fdb_del(struct qca8k_priv *priv, const u8 *mac, u16 port_mask, u16 vid)
+{
+ int ret;
+
+ mutex_lock(&priv->reg_mutex);
+ qca8k_fdb_write(priv, vid, port_mask, mac, 0);
+ ret = qca8k_fdb_access(priv, QCA8K_FDB_PURGE, -1);
+ mutex_unlock(&priv->reg_mutex);
+
+ return ret;
+}
+
+static void
+qca8k_fdb_flush(struct qca8k_priv *priv)
+{
+ mutex_lock(&priv->reg_mutex);
+ qca8k_fdb_access(priv, QCA8K_FDB_FLUSH, -1);
+ mutex_unlock(&priv->reg_mutex);
+}
+
+static void
+qca8k_mib_init(struct qca8k_priv *priv)
+{
+ mutex_lock(&priv->reg_mutex);
+ qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_FLUSH | QCA8K_MIB_BUSY);
+ qca8k_busy_wait(priv, QCA8K_REG_MIB, QCA8K_MIB_BUSY);
+ qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_CPU_KEEP);
+ qca8k_write(priv, QCA8K_REG_MODULE_EN, QCA8K_MODULE_EN_MIB);
+ mutex_unlock(&priv->reg_mutex);
+}
+
+static int
+qca8k_set_pad_ctrl(struct qca8k_priv *priv, int port, int mode)
+{
+ u32 reg;
+
+ switch (port) {
+ case 0:
+ reg = QCA8K_REG_PORT0_PAD_CTRL;
+ break;
+ case 6:
+ reg = QCA8K_REG_PORT6_PAD_CTRL;
+ break;
+ default:
+ pr_err("Can't set PAD_CTRL on port %d\n", port);
+ return -EINVAL;
+ }
+
+ /* Configure a port to be directly connected to an external
+ * PHY or MAC.
+ */
+ switch (mode) {
+ case PHY_INTERFACE_MODE_RGMII:
+ qca8k_write(priv, reg,
+ QCA8K_PORT_PAD_RGMII_EN |
+ QCA8K_PORT_PAD_RGMII_TX_DELAY(3) |
+ QCA8K_PORT_PAD_RGMII_RX_DELAY(3));
+
+ /* According to the datasheet, RGMII delay is enabled through
+ * PORT5_PAD_CTRL for all ports, rather than individual port
+ * registers
+ */
+ qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL,
+ QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
+ qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN);
+ break;
+ default:
+ pr_err("xMII mode %d not supported\n", mode);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void
+qca8k_port_set_status(struct qca8k_priv *priv, int port, int enable)
+{
+ u32 mask = QCA8K_PORT_STATUS_TXMAC;
+
+ /* Port 0 and 6 have no internal PHY */
+ if ((port > 0) && (port < 6))
+ mask |= QCA8K_PORT_STATUS_LINK_AUTO;
+
+ if (enable)
+ qca8k_reg_set(priv, QCA8K_REG_PORT_STATUS(port), mask);
+ else
+ qca8k_reg_clear(priv, QCA8K_REG_PORT_STATUS(port), mask);
+}
+
+static int
+qca8k_setup(struct dsa_switch *ds)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ int ret, i, phy_mode = -1;
+
+ /* Make sure that port 0 is the cpu port */
+ if (!dsa_is_cpu_port(ds, 0)) {
+ pr_err("port 0 is not the CPU port\n");
+ return -EINVAL;
+ }
+
+ mutex_init(&priv->reg_mutex);
+
+ /* Start by setting up the register mapping */
+ priv->regmap = devm_regmap_init(ds->dev, NULL, priv,
+ &qca8k_regmap_config);
+ if (IS_ERR(priv->regmap))
+ pr_warn("regmap initialization failed");
+
+ /* Initialize CPU port pad mode (xMII type, delays...) */
+ phy_mode = of_get_phy_mode(ds->ports[ds->dst->cpu_port].dn);
+ if (phy_mode < 0) {
+ pr_err("Can't find phy-mode for master device\n");
+ return phy_mode;
+ }
+ ret = qca8k_set_pad_ctrl(priv, QCA8K_CPU_PORT, phy_mode);
+ if (ret < 0)
+ return ret;
+
+ /* Enable CPU Port */
+ qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0,
+ QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
+ qca8k_port_set_status(priv, QCA8K_CPU_PORT, 1);
+ priv->port_sts[QCA8K_CPU_PORT].enabled = 1;
+
+ /* Enable MIB counters */
+ qca8k_mib_init(priv);
+
+ /* Enable QCA header mode on the cpu port */
+ qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(QCA8K_CPU_PORT),
+ QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S |
+ QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S);
+
+ /* Disable forwarding by default on all ports */
+ for (i = 0; i < QCA8K_NUM_PORTS; i++)
+ qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
+ QCA8K_PORT_LOOKUP_MEMBER, 0);
+
+ /* Disable MAC by default on all user ports */
+ for (i = 1; i < QCA8K_NUM_PORTS; i++)
+ if (ds->enabled_port_mask & BIT(i))
+ qca8k_port_set_status(priv, i, 0);
+
+ /* Forward all unknown frames to CPU port for Linux processing */
+ qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1,
+ BIT(0) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S |
+ BIT(0) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S |
+ BIT(0) << QCA8K_GLOBAL_FW_CTRL1_MC_DP_S |
+ BIT(0) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S);
+
+ /* Setup connection between CPU port & user ports */
+ for (i = 0; i < DSA_MAX_PORTS; i++) {
+ /* CPU port gets connected to all user ports of the switch */
+ if (dsa_is_cpu_port(ds, i)) {
+ qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(QCA8K_CPU_PORT),
+ QCA8K_PORT_LOOKUP_MEMBER,
+ ds->enabled_port_mask);
+ }
+
+ /* Invividual user ports get connected to CPU port only */
+ if (ds->enabled_port_mask & BIT(i)) {
+ int shift = 16 * (i % 2);
+
+ qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
+ QCA8K_PORT_LOOKUP_MEMBER,
+ BIT(QCA8K_CPU_PORT));
+
+ /* Enable ARP Auto-learning by default */
+ qca8k_reg_set(priv, QCA8K_PORT_LOOKUP_CTRL(i),
+ QCA8K_PORT_LOOKUP_LEARN);
+
+ /* For port based vlans to work we need to set the
+ * default egress vid
+ */
+ qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i),
+ 0xffff << shift, 1 << shift);
+ qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i),
+ QCA8K_PORT_VLAN_CVID(1) |
+ QCA8K_PORT_VLAN_SVID(1));
+ }
+ }
+
+ /* Flush the FDB table */
+ qca8k_fdb_flush(priv);
+
+ return 0;
+}
+
+static int
+qca8k_set_addr(struct dsa_switch *ds, u8 *addr)
+{
+ /* The subsystem always calls this function so add an empty stub */
+ return 0;
+}
+
+static int
+qca8k_phy_read(struct dsa_switch *ds, int phy, int regnum)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+
+ return mdiobus_read(priv->bus, phy, regnum);
+}
+
+static int
+qca8k_phy_write(struct dsa_switch *ds, int phy, int regnum, u16 val)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+
+ return mdiobus_write(priv->bus, phy, regnum, val);
+}
+
+static void
+qca8k_get_strings(struct dsa_switch *ds, int port, uint8_t *data)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++)
+ strncpy(data + i * ETH_GSTRING_LEN, ar8327_mib[i].name,
+ ETH_GSTRING_LEN);
+}
+
+static void
+qca8k_get_ethtool_stats(struct dsa_switch *ds, int port,
+ uint64_t *data)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ const struct qca8k_mib_desc *mib;
+ u32 reg, i;
+ u64 hi;
+
+ for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++) {
+ mib = &ar8327_mib[i];
+ reg = QCA8K_PORT_MIB_COUNTER(port) + mib->offset;
+
+ data[i] = qca8k_read(priv, reg);
+ if (mib->size == 2) {
+ hi = qca8k_read(priv, reg + 4);
+ data[i] |= hi << 32;
+ }
+ }
+}
+
+static int
+qca8k_get_sset_count(struct dsa_switch *ds)
+{
+ return ARRAY_SIZE(ar8327_mib);
+}
+
+static void
+qca8k_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ u32 lpi_en = QCA8K_REG_EEE_CTRL_LPI_EN(port);
+ u32 reg;
+
+ mutex_lock(&priv->reg_mutex);
+ reg = qca8k_read(priv, QCA8K_REG_EEE_CTRL);
+ if (enable)
+ reg |= lpi_en;
+ else
+ reg &= ~lpi_en;
+ qca8k_write(priv, QCA8K_REG_EEE_CTRL, reg);
+ mutex_unlock(&priv->reg_mutex);
+}
+
+static int
+qca8k_eee_init(struct dsa_switch *ds, int port,
+ struct phy_device *phy)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ struct ethtool_eee *p = &priv->port_sts[port].eee;
+ int ret;
+
+ p->supported = (SUPPORTED_1000baseT_Full | SUPPORTED_100baseT_Full);
+
+ ret = phy_init_eee(phy, 0);
+ if (ret)
+ return ret;
+
+ qca8k_eee_enable_set(ds, port, true);
+
+ return 0;
+}
+
+static int
+qca8k_set_eee(struct dsa_switch *ds, int port,
+ struct phy_device *phydev,
+ struct ethtool_eee *e)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ struct ethtool_eee *p = &priv->port_sts[port].eee;
+ int ret = 0;
+
+ p->eee_enabled = e->eee_enabled;
+
+ if (e->eee_enabled) {
+ p->eee_enabled = qca8k_eee_init(ds, port, phydev);
+ if (!p->eee_enabled)
+ ret = -EOPNOTSUPP;
+ }
+ qca8k_eee_enable_set(ds, port, p->eee_enabled);
+
+ return ret;
+}
+
+static int
+qca8k_get_eee(struct dsa_switch *ds, int port,
+ struct ethtool_eee *e)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ struct ethtool_eee *p = &priv->port_sts[port].eee;
+ struct net_device *netdev = ds->ports[port].netdev;
+ int ret;
+
+ ret = phy_ethtool_get_eee(netdev->phydev, p);
+ if (!ret)
+ e->eee_active =
+ !!(p->supported & p->advertised & p->lp_advertised);
+ else
+ e->eee_active = 0;
+
+ e->eee_enabled = p->eee_enabled;
+
+ return ret;
+}
+
+static void
+qca8k_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ u32 stp_state;
+
+ switch (state) {
+ case BR_STATE_DISABLED:
+ stp_state = QCA8K_PORT_LOOKUP_STATE_DISABLED;
+ break;
+ case BR_STATE_BLOCKING:
+ stp_state = QCA8K_PORT_LOOKUP_STATE_BLOCKING;
+ break;
+ case BR_STATE_LISTENING:
+ stp_state = QCA8K_PORT_LOOKUP_STATE_LISTENING;
+ break;
+ case BR_STATE_LEARNING:
+ stp_state = QCA8K_PORT_LOOKUP_STATE_LEARNING;
+ break;
+ case BR_STATE_FORWARDING:
+ default:
+ stp_state = QCA8K_PORT_LOOKUP_STATE_FORWARD;
+ break;
+ }
+
+ qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
+ QCA8K_PORT_LOOKUP_STATE_MASK, stp_state);
+}
+
+static int
+qca8k_port_bridge_join(struct dsa_switch *ds, int port,
+ struct net_device *bridge)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ int port_mask = BIT(QCA8K_CPU_PORT);
+ int i;
+
+ priv->port_sts[port].bridge_dev = bridge;
+
+ for (i = 1; i < QCA8K_NUM_PORTS; i++) {
+ if (priv->port_sts[i].bridge_dev != bridge)
+ continue;
+ /* Add this port to the portvlan mask of the other ports
+ * in the bridge
+ */
+ qca8k_reg_set(priv,
+ QCA8K_PORT_LOOKUP_CTRL(i),
+ BIT(port));
+ if (i != port)
+ port_mask |= BIT(i);
+ }
+ /* Add all other ports to this ports portvlan mask */
+ qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
+ QCA8K_PORT_LOOKUP_MEMBER, port_mask);
+
+ return 0;
+}
+
+static void
+qca8k_port_bridge_leave(struct dsa_switch *ds, int port)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ int i;
+
+ for (i = 1; i < QCA8K_NUM_PORTS; i++) {
+ if (priv->port_sts[i].bridge_dev !=
+ priv->port_sts[port].bridge_dev)
+ continue;
+ /* Remove this port to the portvlan mask of the other ports
+ * in the bridge
+ */
+ qca8k_reg_clear(priv,
+ QCA8K_PORT_LOOKUP_CTRL(i),
+ BIT(port));
+ }
+ priv->port_sts[port].bridge_dev = NULL;
+ /* Set the cpu port to be the only one in the portvlan mask of
+ * this port
+ */
+ qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
+ QCA8K_PORT_LOOKUP_MEMBER, BIT(QCA8K_CPU_PORT));
+}
+
+static int
+qca8k_port_enable(struct dsa_switch *ds, int port,
+ struct phy_device *phy)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+
+ qca8k_port_set_status(priv, port, 1);
+ priv->port_sts[port].enabled = 1;
+
+ return 0;
+}
+
+static void
+qca8k_port_disable(struct dsa_switch *ds, int port,
+ struct phy_device *phy)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+
+ qca8k_port_set_status(priv, port, 0);
+ priv->port_sts[port].enabled = 0;
+}
+
+static int
+qca8k_port_fdb_insert(struct qca8k_priv *priv, const u8 *addr,
+ u16 port_mask, u16 vid)
+{
+ /* Set the vid to the port vlan id if no vid is set */
+ if (!vid)
+ vid = 1;
+
+ return qca8k_fdb_add(priv, addr, port_mask, vid,
+ QCA8K_ATU_STATUS_STATIC);
+}
+
+static int
+qca8k_port_fdb_prepare(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_fdb *fdb,
+ struct switchdev_trans *trans)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+
+ /* The FDB table for static and auto learned entries is the same. We
+ * need to reserve an entry with no port_mask set to make sure that
+ * when port_fdb_add is called an entry is still available. Otherwise
+ * the last free entry might have been used up by auto learning
+ */
+ return qca8k_port_fdb_insert(priv, fdb->addr, 0, fdb->vid);
+}
+
+static void
+qca8k_port_fdb_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_fdb *fdb,
+ struct switchdev_trans *trans)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ u16 port_mask = BIT(port);
+
+ /* Update the FDB entry adding the port_mask */
+ qca8k_port_fdb_insert(priv, fdb->addr, port_mask, fdb->vid);
+}
+
+static int
+qca8k_port_fdb_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_fdb *fdb)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ u16 port_mask = BIT(port);
+ u16 vid = fdb->vid;
+
+ if (!vid)
+ vid = 1;
+
+ return qca8k_fdb_del(priv, fdb->addr, port_mask, vid);
+}
+
+static int
+qca8k_port_fdb_dump(struct dsa_switch *ds, int port,
+ struct switchdev_obj_port_fdb *fdb,
+ int (*cb)(struct switchdev_obj *obj))
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ struct qca8k_fdb _fdb = { 0 };
+ int cnt = QCA8K_NUM_FDB_RECORDS;
+ int ret = 0;
+
+ mutex_lock(&priv->reg_mutex);
+ while (cnt-- && !qca8k_fdb_next(priv, &_fdb, port)) {
+ if (!_fdb.aging)
+ break;
+
+ ether_addr_copy(fdb->addr, _fdb.mac);
+ fdb->vid = _fdb.vid;
+ if (_fdb.aging == QCA8K_ATU_STATUS_STATIC)
+ fdb->ndm_state = NUD_NOARP;
+ else
+ fdb->ndm_state = NUD_REACHABLE;
+
+ ret = cb(&fdb->obj);
+ if (ret)
+ break;
+ }
+ mutex_unlock(&priv->reg_mutex);
+
+ return 0;
+}
+
+static enum dsa_tag_protocol
+qca8k_get_tag_protocol(struct dsa_switch *ds)
+{
+ return DSA_TAG_PROTO_QCA;
+}
+
+static struct dsa_switch_ops qca8k_switch_ops = {
+ .get_tag_protocol = qca8k_get_tag_protocol,
+ .setup = qca8k_setup,
+ .set_addr = qca8k_set_addr,
+ .get_strings = qca8k_get_strings,
+ .phy_read = qca8k_phy_read,
+ .phy_write = qca8k_phy_write,
+ .get_ethtool_stats = qca8k_get_ethtool_stats,
+ .get_sset_count = qca8k_get_sset_count,
+ .get_eee = qca8k_get_eee,
+ .set_eee = qca8k_set_eee,
+ .port_enable = qca8k_port_enable,
+ .port_disable = qca8k_port_disable,
+ .port_stp_state_set = qca8k_port_stp_state_set,
+ .port_bridge_join = qca8k_port_bridge_join,
+ .port_bridge_leave = qca8k_port_bridge_leave,
+ .port_fdb_prepare = qca8k_port_fdb_prepare,
+ .port_fdb_add = qca8k_port_fdb_add,
+ .port_fdb_del = qca8k_port_fdb_del,
+ .port_fdb_dump = qca8k_port_fdb_dump,
+};
+
+static int
+qca8k_sw_probe(struct mdio_device *mdiodev)
+{
+ struct qca8k_priv *priv;
+ u32 id;
+
+ /* allocate the private data struct so that we can probe the switches
+ * ID register
+ */
+ priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->bus = mdiodev->bus;
+
+ /* read the switches ID register */
+ id = qca8k_read(priv, QCA8K_REG_MASK_CTRL);
+ id >>= QCA8K_MASK_CTRL_ID_S;
+ id &= QCA8K_MASK_CTRL_ID_M;
+ if (id != QCA8K_ID_QCA8337)
+ return -ENODEV;
+
+ priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL);
+ if (!priv->ds)
+ return -ENOMEM;
+
+ priv->ds->priv = priv;
+ priv->ds->dev = &mdiodev->dev;
+ priv->ds->ops = &qca8k_switch_ops;
+ mutex_init(&priv->reg_mutex);
+ dev_set_drvdata(&mdiodev->dev, priv);
+
+ return dsa_register_switch(priv->ds, priv->ds->dev->of_node);
+}
+
+static void
+qca8k_sw_remove(struct mdio_device *mdiodev)
+{
+ struct qca8k_priv *priv = dev_get_drvdata(&mdiodev->dev);
+ int i;
+
+ for (i = 0; i < QCA8K_NUM_PORTS; i++)
+ qca8k_port_set_status(priv, i, 0);
+
+ dsa_unregister_switch(priv->ds);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static void
+qca8k_set_pm(struct qca8k_priv *priv, int enable)
+{
+ int i;
+
+ for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ if (!priv->port_sts[i].enabled)
+ continue;
+
+ qca8k_port_set_status(priv, i, enable);
+ }
+}
+
+static int qca8k_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct qca8k_priv *priv = platform_get_drvdata(pdev);
+
+ qca8k_set_pm(priv, 0);
+
+ return dsa_switch_suspend(priv->ds);
+}
+
+static int qca8k_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct qca8k_priv *priv = platform_get_drvdata(pdev);
+
+ qca8k_set_pm(priv, 1);
+
+ return dsa_switch_resume(priv->ds);
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(qca8k_pm_ops,
+ qca8k_suspend, qca8k_resume);
+
+static const struct of_device_id qca8k_of_match[] = {
+ { .compatible = "qca,qca8337" },
+ { /* sentinel */ },
+};
+
+static struct mdio_driver qca8kmdio_driver = {
+ .probe = qca8k_sw_probe,
+ .remove = qca8k_sw_remove,
+ .mdiodrv.driver = {
+ .name = "qca8k",
+ .of_match_table = qca8k_of_match,
+ .pm = &qca8k_pm_ops,
+ },
+};
+
+static int __init
+qca8kmdio_driver_register(void)
+{
+ return mdio_driver_register(&qca8kmdio_driver);
+}
+module_init(qca8kmdio_driver_register);
+
+static void __exit
+qca8kmdio_driver_unregister(void)
+{
+ mdio_driver_unregister(&qca8kmdio_driver);
+}
+module_exit(qca8kmdio_driver_unregister);
+
+MODULE_AUTHOR("Mathieu Olivari, John Crispin <john@...ozen.org>");
+MODULE_DESCRIPTION("Driver for QCA8K ethernet switch family");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:qca8k");
diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
new file mode 100644
index 0000000..2014647
--- /dev/null
+++ b/drivers/net/dsa/qca8k.h
@@ -0,0 +1,185 @@
+/*
+ * Copyright (C) 2009 Felix Fietkau <nbd@....name>
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@...nwrt.org>
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __QCA8K_H
+#define __QCA8K_H
+
+#include <linux/delay.h>
+#include <linux/regmap.h>
+
+#define QCA8K_NUM_PORTS 7
+
+#define PHY_ID_QCA8337 0x004dd036
+#define QCA8K_ID_QCA8337 0x13
+
+#define QCA8K_NUM_FDB_RECORDS 2048
+
+#define QCA8K_CPU_PORT 0
+
+/* Global control registers */
+#define QCA8K_REG_MASK_CTRL 0x000
+#define QCA8K_MASK_CTRL_ID_M 0xff
+#define QCA8K_MASK_CTRL_ID_S 8
+#define QCA8K_REG_PORT0_PAD_CTRL 0x004
+#define QCA8K_REG_PORT5_PAD_CTRL 0x008
+#define QCA8K_REG_PORT6_PAD_CTRL 0x00c
+#define QCA8K_PORT_PAD_RGMII_EN BIT(26)
+#define QCA8K_PORT_PAD_RGMII_TX_DELAY(x) \
+ ((0x8 + (x & 0x3)) << 22)
+#define QCA8K_PORT_PAD_RGMII_RX_DELAY(x) \
+ ((0x10 + (x & 0x3)) << 20)
+#define QCA8K_PORT_PAD_RGMII_RX_DELAY_EN BIT(24)
+#define QCA8K_PORT_PAD_SGMII_EN BIT(7)
+#define QCA8K_REG_MODULE_EN 0x030
+#define QCA8K_MODULE_EN_MIB BIT(0)
+#define QCA8K_REG_MIB 0x034
+#define QCA8K_MIB_FLUSH BIT(24)
+#define QCA8K_MIB_CPU_KEEP BIT(20)
+#define QCA8K_MIB_BUSY BIT(17)
+#define QCA8K_GOL_MAC_ADDR0 0x60
+#define QCA8K_GOL_MAC_ADDR1 0x64
+#define QCA8K_REG_PORT_STATUS(_i) (0x07c + (_i) * 4)
+#define QCA8K_PORT_STATUS_SPEED GENMASK(2, 0)
+#define QCA8K_PORT_STATUS_SPEED_S 0
+#define QCA8K_PORT_STATUS_TXMAC BIT(2)
+#define QCA8K_PORT_STATUS_RXMAC BIT(3)
+#define QCA8K_PORT_STATUS_TXFLOW BIT(4)
+#define QCA8K_PORT_STATUS_RXFLOW BIT(5)
+#define QCA8K_PORT_STATUS_DUPLEX BIT(6)
+#define QCA8K_PORT_STATUS_LINK_UP BIT(8)
+#define QCA8K_PORT_STATUS_LINK_AUTO BIT(9)
+#define QCA8K_PORT_STATUS_LINK_PAUSE BIT(10)
+#define QCA8K_REG_PORT_HDR_CTRL(_i) (0x9c + (_i * 4))
+#define QCA8K_PORT_HDR_CTRL_RX_MASK GENMASK(3, 2)
+#define QCA8K_PORT_HDR_CTRL_RX_S 2
+#define QCA8K_PORT_HDR_CTRL_TX_MASK GENMASK(1, 0)
+#define QCA8K_PORT_HDR_CTRL_TX_S 0
+#define QCA8K_PORT_HDR_CTRL_ALL 2
+#define QCA8K_PORT_HDR_CTRL_MGMT 1
+#define QCA8K_PORT_HDR_CTRL_NONE 0
+
+/* EEE control registers */
+#define QCA8K_REG_EEE_CTRL 0x100
+#define QCA8K_REG_EEE_CTRL_LPI_EN(_i) ((_i + 1) * 2)
+
+/* ACL registers */
+#define QCA8K_REG_PORT_VLAN_CTRL0(_i) (0x420 + (_i * 8))
+#define QCA8K_PORT_VLAN_CVID(x) (x << 16)
+#define QCA8K_PORT_VLAN_SVID(x) x
+#define QCA8K_REG_PORT_VLAN_CTRL1(_i) (0x424 + (_i * 8))
+#define QCA8K_REG_IPV4_PRI_BASE_ADDR 0x470
+#define QCA8K_REG_IPV4_PRI_ADDR_MASK 0x474
+
+/* Lookup registers */
+#define QCA8K_REG_ATU_DATA0 0x600
+#define QCA8K_ATU_ADDR2_S 24
+#define QCA8K_ATU_ADDR3_S 16
+#define QCA8K_ATU_ADDR4_S 8
+#define QCA8K_REG_ATU_DATA1 0x604
+#define QCA8K_ATU_PORT_M 0x7f
+#define QCA8K_ATU_PORT_S 16
+#define QCA8K_ATU_ADDR0_S 8
+#define QCA8K_REG_ATU_DATA2 0x608
+#define QCA8K_ATU_VID_M 0xfff
+#define QCA8K_ATU_VID_S 8
+#define QCA8K_ATU_STATUS_M 0xf
+#define QCA8K_ATU_STATUS_STATIC 0xf
+#define QCA8K_REG_ATU_FUNC 0x60c
+#define QCA8K_ATU_FUNC_BUSY BIT(31)
+#define QCA8K_ATU_FUNC_PORT_EN BIT(14)
+#define QCA8K_ATU_FUNC_MULTI_EN BIT(13)
+#define QCA8K_ATU_FUNC_FULL BIT(12)
+#define QCA8K_ATU_FUNC_PORT_M 0xf
+#define QCA8K_ATU_FUNC_PORT_S 8
+#define QCA8K_REG_GLOBAL_FW_CTRL0 0x620
+#define QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN BIT(10)
+#define QCA8K_REG_GLOBAL_FW_CTRL1 0x624
+#define QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S 24
+#define QCA8K_GLOBAL_FW_CTRL1_BC_DP_S 16
+#define QCA8K_GLOBAL_FW_CTRL1_MC_DP_S 8
+#define QCA8K_GLOBAL_FW_CTRL1_UC_DP_S 0
+#define QCA8K_PORT_LOOKUP_CTRL(_i) (0x660 + (_i) * 0xc)
+#define QCA8K_PORT_LOOKUP_MEMBER GENMASK(6, 0)
+#define QCA8K_PORT_LOOKUP_STATE_MASK GENMASK(18, 16)
+#define QCA8K_PORT_LOOKUP_STATE_DISABLED (0 << 16)
+#define QCA8K_PORT_LOOKUP_STATE_BLOCKING (1 << 16)
+#define QCA8K_PORT_LOOKUP_STATE_LISTENING (2 << 16)
+#define QCA8K_PORT_LOOKUP_STATE_LEARNING (3 << 16)
+#define QCA8K_PORT_LOOKUP_STATE_FORWARD (4 << 16)
+#define QCA8K_PORT_LOOKUP_STATE GENMASK(18, 16)
+#define QCA8K_PORT_LOOKUP_LEARN BIT(20)
+
+/* Pkt edit registers */
+#define QCA8K_EGRESS_VLAN(x) (0x0c70 + (4 * (x / 2)))
+
+/* L3 registers */
+#define QCA8K_HROUTER_CONTROL 0xe00
+#define QCA8K_HROUTER_CONTROL_GLB_LOCKTIME_M GENMASK(17, 16)
+#define QCA8K_HROUTER_CONTROL_GLB_LOCKTIME_S 16
+#define QCA8K_HROUTER_CONTROL_ARP_AGE_MODE 1
+#define QCA8K_HROUTER_PBASED_CONTROL1 0xe08
+#define QCA8K_HROUTER_PBASED_CONTROL2 0xe0c
+#define QCA8K_HNAT_CONTROL 0xe38
+
+/* MIB registers */
+#define QCA8K_PORT_MIB_COUNTER(_i) (0x1000 + (_i) * 0x100)
+
+/* QCA specific MII registers */
+#define MII_ATH_MMD_ADDR 0x0d
+#define MII_ATH_MMD_DATA 0x0e
+
+enum {
+ QCA8K_PORT_SPEED_10M = 0,
+ QCA8K_PORT_SPEED_100M = 1,
+ QCA8K_PORT_SPEED_1000M = 2,
+ QCA8K_PORT_SPEED_ERR = 3,
+};
+
+enum qca8k_fdb_cmd {
+ QCA8K_FDB_FLUSH = 1,
+ QCA8K_FDB_LOAD = 2,
+ QCA8K_FDB_PURGE = 3,
+ QCA8K_FDB_NEXT = 6,
+ QCA8K_FDB_SEARCH = 7,
+};
+
+struct ar8xxx_port_status {
+ struct ethtool_eee eee;
+ struct net_device *bridge_dev;
+ int enabled;
+};
+
+struct qca8k_priv {
+ struct regmap *regmap;
+ struct mii_bus *bus;
+ struct ar8xxx_port_status port_sts[QCA8K_NUM_PORTS];
+ struct dsa_switch *ds;
+ struct mutex reg_mutex;
+};
+
+struct qca8k_mib_desc {
+ unsigned int size;
+ unsigned int offset;
+ const char *name;
+};
+
+struct qca8k_fdb {
+ u16 vid;
+ u8 port_mask;
+ u8 aging;
+ u8 mac[6];
+};
+
+#endif /* __QCA8K_H */
--
1.7.10.4
Powered by blists - more mailing lists