[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20160919141949.5826-2-mkl@pengutronix.de>
Date: Mon, 19 Sep 2016 16:19:49 +0200
From: Marc Kleine-Budde <mkl@...gutronix.de>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net, linux-can@...r.kernel.org,
kernel@...gutronix.de, Fabio Estevam <fabio.estevam@....com>,
linux-stable <stable@...r.kernel.org>,
Marc Kleine-Budde <mkl@...gutronix.de>
Subject: [PATCH] can: flexcan: fix resume function
From: Fabio Estevam <fabio.estevam@....com>
On a imx6ul-pico board the following error is seen during system suspend:
dpm_run_callback(): platform_pm_resume+0x0/0x54 returns -110
PM: Device 2090000.flexcan failed to resume: error -110
The reason for this suspend error is because when the CAN interface is not
active the clocks are disabled and then flexcan_chip_enable() will
always fail due to a timeout error.
In order to fix this issue, only call flexcan_chip_enable/disable()
when the CAN interface is active.
Based on a patch from Dong Aisheng in the NXP kernel.
Signed-off-by: Fabio Estevam <fabio.estevam@....com>
Cc: linux-stable <stable@...r.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@...gutronix.de>
---
drivers/net/can/flexcan.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 41c0fc9f3b14..16f7cadda5c3 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -1268,11 +1268,10 @@ static int __maybe_unused flexcan_suspend(struct device *device)
struct flexcan_priv *priv = netdev_priv(dev);
int err;
- err = flexcan_chip_disable(priv);
- if (err)
- return err;
-
if (netif_running(dev)) {
+ err = flexcan_chip_disable(priv);
+ if (err)
+ return err;
netif_stop_queue(dev);
netif_device_detach(dev);
}
@@ -1285,13 +1284,17 @@ static int __maybe_unused flexcan_resume(struct device *device)
{
struct net_device *dev = dev_get_drvdata(device);
struct flexcan_priv *priv = netdev_priv(dev);
+ int err;
priv->can.state = CAN_STATE_ERROR_ACTIVE;
if (netif_running(dev)) {
netif_device_attach(dev);
netif_start_queue(dev);
+ err = flexcan_chip_enable(priv);
+ if (err)
+ return err;
}
- return flexcan_chip_enable(priv);
+ return 0;
}
static SIMPLE_DEV_PM_OPS(flexcan_pm_ops, flexcan_suspend, flexcan_resume);
--
2.9.3
Powered by blists - more mailing lists