[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20160921230503.23309-1-joel@jms.id.au>
Date: Thu, 22 Sep 2016 08:34:57 +0930
From: Joel Stanley <joel@....id.au>
To: davem@...emloft.net
Cc: clg@...d.org, gwshan@...ux.vnet.ibm.com, andrew@...n.ch,
andrew@...id.au, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, benh@...nel.crashing.org
Subject: [PATCH net-next v2 0/6] ftgmac100 support for ast2500
Hello Dave,
This series adds support to the ftgmac100 driver for the Aspeed ast2400 and
ast2500 SoCs. In particular, they ensure the driver works correctly on the
ast2500 where the MAC block has seen some changes in register layout.
They have been tested on ast2400 and ast2500 systems with the NCSI stack and
with a directly attached PHY.
V2 reworks the two patches relating to PHYSTS_CHG into the one patch that
disables the interrupt instead of playing with interrupt sensitivity. I kept
patch 4 'net/faraday: Clear stale interrupts' which was first introduced to
clear the stale PHYSTS_CHG interrupt, as it helps keep us safe from unhygienic
(vendor) bootloaders.
Cheers,
Joel
Andrew Jeffery (2):
net/faraday: Separate rx page storage from rxdesc
net/faraday: Make EDO{R,T}R bits configurable
Gavin Shan (1):
net/faraday: Clear stale interrupts
Joel Stanley (3):
net/faraday: Adapt for Aspeed SoCs
net/faraday: Configure old MDIO interface on Aspeed SoCs
net/faraday: Mask out PHYSTS_CHG interrupt
drivers/net/ethernet/faraday/ftgmac100.c | 97 +++++++++++++++++++++++---------
drivers/net/ethernet/faraday/ftgmac100.h | 8 ++-
2 files changed, 75 insertions(+), 30 deletions(-)
--
2.9.3
Powered by blists - more mailing lists