| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1474510965-2049-1-git-send-email-fgao@ikuai8.com>
Date: Thu, 22 Sep 2016 10:22:45 +0800
From: fgao@...ai8.com
To: pablo@...filter.org, kaber@...sh.net,
netfilter-devel@...r.kernel.org, netdev@...r.kernel.org
Cc: gfree.wind@...il.com, Gao Feng <fgao@...ai8.com>
Subject: [PATCH nf v3] netfilter: seqadj: Fix the wrong ack adjust for the RST packet without ack
From: Gao Feng <fgao@...ai8.com>
It is valid that the TCP RST packet which does not set ack flag, and bytes
of ack number are zero. But current seqadj codes would adjust the "0" ack
to invalid ack number. Actually seqadj need to check the ack flag before
adjust it for these RST packets.
The following is my test case
client is 10.26.98.245, and add one iptable rule:
iptables -I INPUT -p tcp --sport 12345 -m connbytes --connbytes 2:
--connbytes-dir reply --connbytes-mode packets -j REJECT --reject-with
tcp-reset
This iptables rule could generate on TCP RST without ack flag.
server:10.172.135.55
Enable the synproxy with seqadjust by the following iptables rules
iptables -t raw -A PREROUTING -i eth0 -p tcp -d 10.172.135.55 --dport 12345
-m tcp --syn -j CT --notrack
iptables -A INPUT -i eth0 -p tcp -d 10.172.135.55 --dport 12345 -m conntrack
--ctstate INVALID,UNTRACKED -j SYNPROXY --sack-perm --timestamp --wscale 7
--mss 1460
iptables -A OUTPUT -o eth0 -p tcp -s 10.172.135.55 --sport 12345 -m conntrack
--ctstate INVALID,UNTRACKED -m tcp --tcp-flags SYN,RST,ACK SYN,ACK -j ACCEPT
The following is my test result.
1. packet trace on client
root@...ters:/tmp# tcpdump -i eth0 tcp port 12345 -n
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
IP 10.26.98.245.45154 > 10.172.135.55.12345: Flags [S], seq 3695959829,
win 29200, options [mss 1460,sackOK,TS val 452367884 ecr 0,nop,wscale 7],
length 0
IP 10.172.135.55.12345 > 10.26.98.245.45154: Flags [S.], seq 546723266,
ack 3695959830, win 0, options [mss 1460,sackOK,TS val 15643479 ecr 452367884,
nop,wscale 7], length 0
IP 10.26.98.245.45154 > 10.172.135.55.12345: Flags [.], ack 1, win 229,
options [nop,nop,TS val 452367885 ecr 15643479], length 0
IP 10.172.135.55.12345 > 10.26.98.245.45154: Flags [.], ack 1, win 226,
options [nop,nop,TS val 15643479 ecr 452367885], length 0
IP 10.26.98.245.45154 > 10.172.135.55.12345: Flags [R], seq 3695959830,
win 0, length 0
2. seqadj log on server
[62873.867319] Adjusting sequence number from 602341895->546723267,
ack from 3695959830->3695959830
[62873.867644] Adjusting sequence number from 602341895->546723267,
ack from 3695959830->3695959830
[62873.869040] Adjusting sequence number from 3695959830->3695959830,
ack from 0->55618628
To summarize, it is clear that the seqadj codes adjust the 0 ack when receive
one TCP RST packet without ack.
Signed-off-by: Gao Feng <fgao@...ai8.com>
---
v3: Add the reproduce steps and packet trace
v2: Regenerate because the first patch is removed
v1: Initial patch
net/netfilter/nf_conntrack_seqadj.c | 34 +++++++++++++++++++---------------
1 file changed, 19 insertions(+), 15 deletions(-)
diff --git a/net/netfilter/nf_conntrack_seqadj.c b/net/netfilter/nf_conntrack_seqadj.c
index dff0f0c..3bd9c7e 100644
--- a/net/netfilter/nf_conntrack_seqadj.c
+++ b/net/netfilter/nf_conntrack_seqadj.c
@@ -179,30 +179,34 @@ int nf_ct_seq_adjust(struct sk_buff *skb,
tcph = (void *)skb->data + protoff;
spin_lock_bh(&ct->lock);
+
if (after(ntohl(tcph->seq), this_way->correction_pos))
seqoff = this_way->offset_after;
else
seqoff = this_way->offset_before;
- if (after(ntohl(tcph->ack_seq) - other_way->offset_before,
- other_way->correction_pos))
- ackoff = other_way->offset_after;
- else
- ackoff = other_way->offset_before;
-
newseq = htonl(ntohl(tcph->seq) + seqoff);
- newack = htonl(ntohl(tcph->ack_seq) - ackoff);
-
inet_proto_csum_replace4(&tcph->check, skb, tcph->seq, newseq, false);
- inet_proto_csum_replace4(&tcph->check, skb, tcph->ack_seq, newack,
- false);
-
- pr_debug("Adjusting sequence number from %u->%u, ack from %u->%u\n",
- ntohl(tcph->seq), ntohl(newseq), ntohl(tcph->ack_seq),
- ntohl(newack));
+ pr_debug("Adjusting sequence number from %u->%u\n",
+ ntohl(tcph->seq), ntohl(newseq));
tcph->seq = newseq;
- tcph->ack_seq = newack;
+
+ if (likely(tcph->ack)) {
+ if (after(ntohl(tcph->ack_seq) - other_way->offset_before,
+ other_way->correction_pos))
+ ackoff = other_way->offset_after;
+ else
+ ackoff = other_way->offset_before;
+
+ newack = htonl(ntohl(tcph->ack_seq) - ackoff);
+ inet_proto_csum_replace4(&tcph->check, skb, tcph->ack_seq,
+ newack, false);
+
+ pr_debug("Adjusting ack number from %u->%u\n",
+ ntohl(tcph->ack_seq), ntohl(newack));
+ tcph->ack_seq = newack;
+ }
res = nf_ct_sack_adjust(skb, protoff, tcph, ct, ctinfo);
spin_unlock_bh(&ct->lock);
--
1.9.1
Powered by blists - more mailing lists