netdev - Re: [PATCH net-next v2 0/3] add support for RGMII on GMAC0 through TRGMII hardware module

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <b2157c96-0b5c-5b7a-31c2-9eb4df71c73d@cogentembedded.com>
Date:   Thu, 22 Sep 2016 20:08:47 +0300
From:   Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
To:     David Miller <davem@...emloft.net>, sean.wang@...iatek.com
Cc:     john@...ozen.org, nbd@...nwrt.org, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-mediatek@...ts.infradead.org,
        andrew@...n.ch, f.fainelli@...il.com, keyhaede@...il.com,
        objelf@...il.com
Subject: Re: [PATCH net-next v2 0/3] add support for RGMII on GMAC0 through
 TRGMII hardware module

Hello.

On 09/22/2016 03:22 PM, David Miller wrote:

>> By default, GMAC0 is connected to built-in switch called
>> MT7530 through the proprietary interface called Turbo RGMII
>> (TRGMII). TRGMII also supports well for RGMII as generic external
>> PHY uses but requires some slight changes to the setup of TRGMII
>> and doesn't have well support on current driver.
>>
>> So this patchset
>> 1) provides the slight changes of the setup for RGMII can work
>>    through TRGMII
>> 2) adds additional setting "trgmii" as PHY_INTERFACE_MODE_TRGMII
>>    about phy-mode on device tree to make GMAC0 distinguish which
>>    mode it runs
>> 3) changes dynamically source clock, TX/RX delay and interface
>>    mode on TRGMII for adapting various link
>>
>> Changes since v1:
>> - fixed the style of comment which doesn't have a space at
>>    the beginning and end of comment lines
>> - add support for phy-mode "trgmii" as PHY_INTERFACE_MODE_TRGMII
>>    into linux/phy.h
>> - enhance the Documentation about device tree binding for trgmii
>>   which is applicable only for GMAC0 which uses fixed-link
>
> Series applied.

    Despite my comments? Sigh...

MBR, Sergei