netdev - [RFC v2 0/4] Add support for led triggers on phy link state change

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1475013111-18942-1-git-send-email-zach.brown@ni.com>
Date:   Tue, 27 Sep 2016 16:51:47 -0500
From:   Zach Brown <zach.brown@...com>
To:     f.fainelli@...il.com
Cc:     mlindner@...vell.com, stephen@...workplumber.org,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        devel@...verdev.osuosl.org, florian.c.schilhabel@...glemail.com,
        Larry.Finger@...inger.net, gregkh@...uxfoundation.org,
        zach.brown@...com
Subject: [RFC v2 0/4] Add support for led triggers on phy link state change

Fix two net drivers that declared enum constants that conflict with enum
constants in linux/leds.h

Create function that encapsulates actions taken during the adjust phy link step
of phy state changes.

Add support for led triggers on phy link state changes by adding
a config option. When set the config option will create a set of led triggers
for each phy device. Users can use the led triggers to represent link state
changes on the phy.

v2:
 * New patch that creates phy_adjust_link function to encapsulate actions taken
   when adjusting phy link during phy state changes
 * led trigger speed strings changed to match existing phy speed strings
 * New function that maps speeds to led triggers
 * Replace magic constants with definitions when declaring trigger name buffer
   and number of triggers.

Josh Cartwright (1):
  phy,leds: add support for led triggers on phy link state change

Zach Brown (3):
  skge: Change LED_OFF to LED_REG_OFF in marvel skge driver to avoid
    conflicts with leds namespace
  staging: rtl8712: Change _LED_STATE enum in rtl871x driver to avoid
    conflicts with LED namespace
  phy: Encapsulate actions performed during link state changes into
    function phy_adjust_link

 drivers/net/ethernet/marvell/skge.c   |   4 +-
 drivers/net/ethernet/marvell/skge.h   |   2 +-
 drivers/net/phy/Kconfig               |  13 +-
 drivers/net/phy/Makefile              |   1 +
 drivers/net/phy/phy.c                 |  22 +-
 drivers/net/phy/phy_device.c          |   4 +
 drivers/net/phy/phy_led_triggers.c    | 121 +++++++++++
 drivers/staging/rtl8712/rtl8712_led.c | 388 +++++++++++++++++-----------------
 include/linux/phy.h                   |   9 +
 include/linux/phy_led_triggers.h      |  52 +++++
 10 files changed, 410 insertions(+), 206 deletions(-)
 create mode 100644 drivers/net/phy/phy_led_triggers.c
 create mode 100644 include/linux/phy_led_triggers.h

--
2.7.4