netdev - Re: [PATCH RFC v2 net-next 0/8] net: qualcomm: add QCA7000 UART driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20161013081441.GA3639@kroah.com>
Date:   Thu, 13 Oct 2016 10:14:41 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     Stefan Wahren <stefan.wahren@...e.com>
Cc:     Jiri Slaby <jslaby@...e.com>,
        "David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH RFC v2 net-next 0/8] net: qualcomm: add QCA7000 UART
 driver

On Thu, Oct 13, 2016 at 10:09:09AM +0200, Stefan Wahren wrote:
> 
> > Stefan Wahren <stefan.wahren@...e.com> hat am 26. September 2016 um 13:07
> > geschrieben:
> > 
> > 
> > The Qualcomm QCA7000 HomePlug GreenPHY supports two interfaces:
> > UART and SPI. This patch series adds the missing support for UART.
> > 
> > This driver based on the Qualcomm code [1], but contains some changes:
> > * use random MAC address per default
> > * use net_device_stats from device
> > * share frame decoding between SPI and UART driver
> > * improve error handling
> > * reimplement tty_wakeup with work queue (based on slcan)
> > 
> > The patches 1 - 3 are just for clean up and are not related to
> > the UART support. Patches 4 - 7 prepare the existing QCA7000
> > code for UART support. The last patch contains the new driver.
> > 
> > In order to test the driver a modified slattach in userspace is also
> > required. A prepared busybox (includes slattach) can be found here [2].
> > 
> > The code itself has been tested on a Freescale i.MX28 board.
> > 
> > Changes in v2:
> >   * fix build issue by using netif_trans_update() and dev_trans_start()
> > 
> > [1] - https://github.com/IoE/qca7000
> > [2] - https://github.com/lategoodbye/busybox/commits/qca7k_support_1_24
> > 
> 
> Gently ping, since i didn't receive any comment for this version.

It's the middle of the merge window, I can't add any new patches right
now.  Please wait until after 4.9-rc1 is out.

thanks,

greg k-h