lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Tue, 18 Oct 2016 09:20:33 +0200 From: Niklas Cassel <niklas.cassel@...s.com> To: <larper@...s.com>, <netdev@...r.kernel.org> CC: <linux-kernel@...r.kernel.org>, Niklas Cassel <niklass@...s.com>, Jesper Nilsson <jespern@...s.com> Subject: [PATCH v2 1/2] dwc_eth_qos: do not clear pause flags from phy_device->supported From: Niklas Cassel <niklas.cassel@...s.com> phy_device->supported is originally set by the PHY driver. The ethernet driver should filter phy_device->supported to only contain flags supported by the IP. The IP supports setting rx and tx flow control independently, therefore SUPPORTED_Pause and SUPPORTED_Asym_Pause should not be cleared. If the flags are cleared, pause frames cannot be enabled (even if they are supported by the PHY). Signed-off-by: Niklas Cassel <niklas.cassel@...s.com> Signed-off-by: Jesper Nilsson <jespern@...s.com> Acked-by: Lars Persson <larper@...s.com> --- drivers/net/ethernet/synopsys/dwc_eth_qos.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/synopsys/dwc_eth_qos.c b/drivers/net/ethernet/synopsys/dwc_eth_qos.c index 0d0053128542..d775729648ef 100644 --- a/drivers/net/ethernet/synopsys/dwc_eth_qos.c +++ b/drivers/net/ethernet/synopsys/dwc_eth_qos.c @@ -982,7 +982,8 @@ static int dwceqos_mii_probe(struct net_device *ndev) if (netif_msg_probe(lp)) phy_attached_info(phydev); - phydev->supported &= PHY_GBIT_FEATURES; + phydev->supported &= PHY_GBIT_FEATURES | SUPPORTED_Pause | + SUPPORTED_Asym_Pause; lp->link = 0; lp->speed = 0; -- 2.1.4
Powered by blists - more mailing lists