netdev - [patch net 4/4] mlxsw: pci: Fix reset wait for SwitchX2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1476972345-31568-5-git-send-email-jiri@resnulli.us>
Date:   Thu, 20 Oct 2016 16:05:45 +0200
From:   Jiri Pirko <jiri@...nulli.us>
To:     netdev@...r.kernel.org
Cc:     davem@...emloft.net, idosch@...lanox.com, eladr@...lanox.com,
        yotamg@...lanox.com, nogahf@...lanox.com, ogerlitz@...lanox.com
Subject: [patch net 4/4] mlxsw: pci: Fix reset wait for SwitchX2

From: Jiri Pirko <jiri@...lanox.com>

SwitchX2 firmware does not implement reset done yet. Moreover, when
busy-polled for ready magic, that slows down firmware and reset takes
longer than the defined timeout, causing initialization to fail.
So restore the previous behaviour and just sleep in this case.

Fixes: 233fa44bd67a ("mlxsw: pci: Implement reset done check")
Signed-off-by: Jiri Pirko <jiri@...lanox.com>
Reviewed-by: Ido Schimmel <idosch@...lanox.com>
---
 drivers/net/ethernet/mellanox/mlxsw/pci.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci.c b/drivers/net/ethernet/mellanox/mlxsw/pci.c
index e742bd4..912f71f 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/pci.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/pci.c
@@ -1838,11 +1838,17 @@ static const struct mlxsw_bus mlxsw_pci_bus = {
 	.cmd_exec		= mlxsw_pci_cmd_exec,
 };
 
-static int mlxsw_pci_sw_reset(struct mlxsw_pci *mlxsw_pci)
+static int mlxsw_pci_sw_reset(struct mlxsw_pci *mlxsw_pci,
+			      const struct pci_device_id *id)
 {
 	unsigned long end;
 
 	mlxsw_pci_write32(mlxsw_pci, SW_RESET, MLXSW_PCI_SW_RESET_RST_BIT);
+	if (id->device == PCI_DEVICE_ID_MELLANOX_SWITCHX2) {
+		msleep(MLXSW_PCI_SW_RESET_TIMEOUT_MSECS);
+		return 0;
+	}
+
 	wmb(); /* reset needs to be written before we read control register */
 	end = jiffies + msecs_to_jiffies(MLXSW_PCI_SW_RESET_TIMEOUT_MSECS);
 	do {
@@ -1909,7 +1915,7 @@ static int mlxsw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	mlxsw_pci->pdev = pdev;
 	pci_set_drvdata(pdev, mlxsw_pci);
 
-	err = mlxsw_pci_sw_reset(mlxsw_pci);
+	err = mlxsw_pci_sw_reset(mlxsw_pci, id);
 	if (err) {
 		dev_err(&pdev->dev, "Software reset failed\n");
 		goto err_sw_reset;
-- 
2.5.5