netdev - Re: [PATCH net-next] ibmveth: v1 calculate correct gso_size and set gso

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1477591717.7065.237.camel@edumazet-glaptop3.roam.corp.google.com>
Date:   Thu, 27 Oct 2016 11:08:37 -0700
From:   Eric Dumazet <eric.dumazet@...il.com>
To:     Thomas Falcon <tlfalcon@...ux.vnet.ibm.com>
Cc:     Jon Maxwell <jmaxwell37@...il.com>, jmaxwell@...hat.com,
        hofrat@...dl.org, linux-kernel@...r.kernel.org, jarod@...hat.com,
        netdev@...r.kernel.org, paulus@...ba.org, tom@...bertland.com,
        mleitner@...hat.com, linuxppc-dev@...ts.ozlabs.org,
        davem@...emloft.net
Subject: Re: [PATCH net-next] ibmveth: v1 calculate correct gso_size and set
 gso_type

On Thu, 2016-10-27 at 12:54 -0500, Thomas Falcon wrote:
> On 10/27/2016 10:26 AM, Eric Dumazet wrote:
> > On Wed, 2016-10-26 at 11:09 +1100, Jon Maxwell wrote:
> >> We recently encountered a bug where a few customers using ibmveth on the 
> >> same LPAR hit an issue where a TCP session hung when large receive was
> >> enabled. Closer analysis revealed that the session was stuck because the 
> >> one side was advertising a zero window repeatedly.
> >>
> >> We narrowed this down to the fact the ibmveth driver did not set gso_size 
> >> which is translated by TCP into the MSS later up the stack. The MSS is 
> >> used to calculate the TCP window size and as that was abnormally large, 
> >> it was calculating a zero window, even although the sockets receive buffer 
> >> was completely empty. 
> >>
> >> We were able to reproduce this and worked with IBM to fix this. Thanks Tom 
> >> and Marcelo for all your help and review on this.
> >>
> >> The patch fixes both our internal reproduction tests and our customers tests.
> >>
> >> Signed-off-by: Jon Maxwell <jmaxwell37@...il.com>
> >> ---
> >>  drivers/net/ethernet/ibm/ibmveth.c | 20 ++++++++++++++++++++
> >>  1 file changed, 20 insertions(+)
> >>
> >> diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c
> >> index 29c05d0..c51717e 100644
> >> --- a/drivers/net/ethernet/ibm/ibmveth.c
> >> +++ b/drivers/net/ethernet/ibm/ibmveth.c
> >> @@ -1182,6 +1182,8 @@ static int ibmveth_poll(struct napi_struct *napi, int budget)
> >>  	int frames_processed = 0;
> >>  	unsigned long lpar_rc;
> >>  	struct iphdr *iph;
> >> +	bool large_packet = 0;
> >> +	u16 hdr_len = ETH_HLEN + sizeof(struct tcphdr);
> >>  
> >>  restart_poll:
> >>  	while (frames_processed < budget) {
> >> @@ -1236,10 +1238,28 @@ static int ibmveth_poll(struct napi_struct *napi, int budget)
> >>  						iph->check = 0;
> >>  						iph->check = ip_fast_csum((unsigned char *)iph, iph->ihl);
> >>  						adapter->rx_large_packets++;
> >> +						large_packet = 1;
> >>  					}
> >>  				}
> >>  			}
> >>  
> >> +			if (skb->len > netdev->mtu) {
> >> +				iph = (struct iphdr *)skb->data;
> >> +				if (be16_to_cpu(skb->protocol) == ETH_P_IP &&
> >> +				    iph->protocol == IPPROTO_TCP) {
> >> +					hdr_len += sizeof(struct iphdr);
> >> +					skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4;
> >> +					skb_shinfo(skb)->gso_size = netdev->mtu - hdr_len;
> >> +				} else if (be16_to_cpu(skb->protocol) == ETH_P_IPV6 &&
> >> +					   iph->protocol == IPPROTO_TCP) {
> >> +					hdr_len += sizeof(struct ipv6hdr);
> >> +					skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6;
> >> +					skb_shinfo(skb)->gso_size = netdev->mtu - hdr_len;
> >> +				}
> >> +				if (!large_packet)
> >> +					adapter->rx_large_packets++;
> >> +			}
> >> +
> >>  
> > This might break forwarding and PMTU discovery.
> >
> > You force gso_size to device mtu, regardless of real MSS used by the TCP
> > sender.
> >
> > Don't you have the MSS provided in RX descriptor, instead of guessing
> > the value ?
> >
> >
> >
> The MSS is not always available unfortunately, so this is the best solution there is at the moment. 

Hmm... then what about skb_shinfo(skb)->gso_segs ?

ip_rcv() for example has :

        __IP_ADD_STATS(net,
                       IPSTATS_MIB_NOECTPKTS + (iph->tos & INET_ECN_MASK),
                       max_t(unsigned short, 1, skb_shinfo(skb)->gso_segs));



Also prefer : (skb->protocol == htons(ETH_P_IP)) tests

And the ipv6 test is wrong :

} else if (be16_to_cpu(skb->protocol) == ETH_P_IPV6 &&
           iph->protocol == IPPROTO_TCP) {


Since iph is a pointer to ipv4 iphdr .