| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1477574842-29688-9-git-send-email-tariqt@mellanox.com>
Date: Thu, 27 Oct 2016 16:27:20 +0300
From: Tariq Toukan <tariqt@...lanox.com>
To: "David S. Miller" <davem@...emloft.net>
Cc: netdev@...r.kernel.org, Eran Ben Elisha <eranbe@...lanox.com>,
Eugenia Emantayev <eugenia@...lanox.com>,
Tariq Toukan <tariqt@...lanox.com>
Subject: [PATCH net 08/10] net/mlx4: Fix firmware command timeout during interrupt test
From: Eugenia Emantayev <eugenia@...lanox.com>
Currently interrupt test that is part of ethtool selftest runs the
check over all interrupt vectors of the device.
In mlx4_en package part of interrupt vectors are uninitialized since
mlx4_ib doesn't exist. This causes NOP FW command to time out.
Change logic to test current port interrupt vectors only.
Signed-off-by: Eugenia Emantayev <eugenia@...lanox.com>
Signed-off-by: Tariq Toukan <tariqt@...lanox.com>
---
drivers/net/ethernet/mellanox/mlx4/en_selftest.c | 26 +++++++++-
drivers/net/ethernet/mellanox/mlx4/eq.c | 62 +++++++++++-------------
include/linux/mlx4/device.h | 3 +-
3 files changed, 55 insertions(+), 36 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_selftest.c b/drivers/net/ethernet/mellanox/mlx4/en_selftest.c
index b66e03d9711f..c06346a82496 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_selftest.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_selftest.c
@@ -118,6 +118,29 @@ static int mlx4_en_test_loopback(struct mlx4_en_priv *priv)
return !loopback_ok;
}
+static int mlx4_en_test_interrupts(struct mlx4_en_priv *priv)
+{
+ struct mlx4_en_dev *mdev = priv->mdev;
+ int err = 0;
+ int i = 0;
+
+ err = mlx4_test_async(mdev->dev);
+ /* When not in MSI_X or slave, test only async */
+ if (!(mdev->dev->flags & MLX4_FLAG_MSI_X) || mlx4_is_slave(mdev->dev))
+ return err;
+
+ /* A loop over all completion vectors of current port,
+ * for each vector check whether it works by mapping command
+ * completions to that vector and performing a NOP command
+ */
+ for (i = 0; i < priv->rx_ring_num; i++) {
+ err = mlx4_test_interrupt(mdev->dev, priv->rx_cq[i]->vector);
+ if (err)
+ break;
+ }
+
+ return err;
+}
static int mlx4_en_test_link(struct mlx4_en_priv *priv)
{
@@ -151,7 +174,6 @@ static int mlx4_en_test_speed(struct mlx4_en_priv *priv)
void mlx4_en_ex_selftest(struct net_device *dev, u32 *flags, u64 *buf)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
- struct mlx4_en_dev *mdev = priv->mdev;
int i, carrier_ok;
memset(buf, 0, sizeof(u64) * MLX4_EN_NUM_SELF_TEST);
@@ -177,7 +199,7 @@ void mlx4_en_ex_selftest(struct net_device *dev, u32 *flags, u64 *buf)
netif_carrier_on(dev);
}
- buf[0] = mlx4_test_interrupts(mdev->dev);
+ buf[0] = mlx4_en_test_interrupts(priv);
buf[1] = mlx4_en_test_link(priv);
buf[2] = mlx4_en_test_speed(priv);
diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c
index cf8f8a72a801..cd3638e6fe25 100644
--- a/drivers/net/ethernet/mellanox/mlx4/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/eq.c
@@ -1361,53 +1361,49 @@ void mlx4_cleanup_eq_table(struct mlx4_dev *dev)
kfree(priv->eq_table.uar_map);
}
-/* A test that verifies that we can accept interrupts on all
- * the irq vectors of the device.
+/* A test that verifies that we can accept interrupts
+ * on the vector allocated for asynchronous events
+ */
+int mlx4_test_async(struct mlx4_dev *dev)
+{
+ return mlx4_NOP(dev);
+}
+EXPORT_SYMBOL(mlx4_test_async);
+
+/* A test that verifies that we can accept interrupts
+ * on the given irq vector of the tested port.
* Interrupts are checked using the NOP command.
*/
-int mlx4_test_interrupts(struct mlx4_dev *dev)
+int mlx4_test_interrupt(struct mlx4_dev *dev, int vector)
{
struct mlx4_priv *priv = mlx4_priv(dev);
- int i;
int err;
- err = mlx4_NOP(dev);
- /* When not in MSI_X, there is only one irq to check */
- if (!(dev->flags & MLX4_FLAG_MSI_X) || mlx4_is_slave(dev))
- return err;
-
- /* A loop over all completion vectors, for each vector we will check
- * whether it works by mapping command completions to that vector
- * and performing a NOP command
- */
- for(i = 0; !err && (i < dev->caps.num_comp_vectors); ++i) {
- /* Make sure request_irq was called */
- if (!priv->eq_table.eq[i].have_irq)
- continue;
-
- /* Temporary use polling for command completions */
- mlx4_cmd_use_polling(dev);
-
- /* Map the new eq to handle all asynchronous events */
- err = mlx4_MAP_EQ(dev, get_async_ev_mask(dev), 0,
- priv->eq_table.eq[i].eqn);
- if (err) {
- mlx4_warn(dev, "Failed mapping eq for interrupt test\n");
- mlx4_cmd_use_events(dev);
- break;
- }
+ /* Temporary use polling for command completions */
+ mlx4_cmd_use_polling(dev);
- /* Go back to using events */
- mlx4_cmd_use_events(dev);
- err = mlx4_NOP(dev);
+ /* Map the new eq to handle all asynchronous events */
+ err = mlx4_MAP_EQ(dev, get_async_ev_mask(dev), 0,
+ priv->eq_table.eq[MLX4_CQ_TO_EQ_VECTOR(vector)].eqn);
+ if (err) {
+ mlx4_warn(dev, "Failed mapping eq for interrupt test\n");
+ goto out;
}
+ /* Go back to using events */
+ mlx4_cmd_use_events(dev);
+ err = mlx4_NOP(dev);
+
/* Return to default */
+ mlx4_cmd_use_polling(dev);
+out:
mlx4_MAP_EQ(dev, get_async_ev_mask(dev), 0,
priv->eq_table.eq[MLX4_EQ_ASYNC].eqn);
+ mlx4_cmd_use_events(dev);
+
return err;
}
-EXPORT_SYMBOL(mlx4_test_interrupts);
+EXPORT_SYMBOL(mlx4_test_interrupt);
bool mlx4_is_eq_vector_valid(struct mlx4_dev *dev, u8 port, int vector)
{
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index f6a164297358..3be7abd6e722 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -1399,7 +1399,8 @@ void mlx4_fmr_unmap(struct mlx4_dev *dev, struct mlx4_fmr *fmr,
u32 *lkey, u32 *rkey);
int mlx4_fmr_free(struct mlx4_dev *dev, struct mlx4_fmr *fmr);
int mlx4_SYNC_TPT(struct mlx4_dev *dev);
-int mlx4_test_interrupts(struct mlx4_dev *dev);
+int mlx4_test_interrupt(struct mlx4_dev *dev, int vector);
+int mlx4_test_async(struct mlx4_dev *dev);
int mlx4_query_diag_counters(struct mlx4_dev *dev, u8 op_modifier,
const u32 offset[], u32 value[],
size_t array_len, u8 port);
--
1.8.3.1
Powered by blists - more mailing lists