netdev - [PATCH net 05/10] net/mlx4_en: Process all completions in RX rings after port goes up

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1477574842-29688-6-git-send-email-tariqt@mellanox.com>
Date:   Thu, 27 Oct 2016 16:27:17 +0300
From:   Tariq Toukan <tariqt@...lanox.com>
To:     "David S. Miller" <davem@...emloft.net>
Cc:     netdev@...r.kernel.org, Eran Ben Elisha <eranbe@...lanox.com>,
        Erez Shitrit <erezsh@...lanox.com>,
        Eugenia Emantayev <eugenia@...lanox.com>,
        Tariq Toukan <tariqt@...lanox.com>
Subject: [PATCH net 05/10] net/mlx4_en: Process all completions in RX rings after port goes up

From: Erez Shitrit <erezsh@...lanox.com>

Currently there is a race between incoming traffic and
initialization flow. HW is able to receive the packets
after INIT_PORT is done and unicast steering is configured.
Before we set priv->port_up NAPI is not scheduled and
receive queues become full. Therefore we never get
new interrupts about the completions.
This issue could happen if running heavy traffic during
bringing port up.
The resolution is to schedule NAPI once port_up is set.
If receive queues were full this will process all cqes
and release them.

Fixes: c27a02cd94d6 ("mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC")
Signed-off-by: Erez Shitrit <erezsh@...lanox.com>
Signed-off-by: Eugenia Emantayev <eugenia@...lanox.com>
Signed-off-by: Tariq Toukan <tariqt@...lanox.com>
---
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index 7e703bed7b82..e25c11dff525 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -1733,6 +1733,13 @@ int mlx4_en_start_port(struct net_device *dev)
 		udp_tunnel_get_rx_info(dev);
 
 	priv->port_up = true;
+
+	/* Process all completions if exist to prevent
+	 * the queues freezing if they are full
+	 */
+	for (i = 0; i < priv->rx_ring_num; i++)
+		napi_schedule(&priv->rx_cq[i]->napi);
+
 	netif_tx_start_all_queues(dev);
 	netif_device_attach(dev);
 
-- 
1.8.3.1