[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <29c3fe96-8593-eaae-5ffe-d74e687f3448@baylibre.com>
Date: Mon, 31 Oct 2016 11:25:43 +0100
From: Neil Armstrong <narmstrong@...libre.com>
To: Joachim Eastwood <manabian@...il.com>
Cc: Rob Herring <robh@...nel.org>,
"peppe.cavallaro" <peppe.cavallaro@...com>,
alexandre.torgue@...com, netdev <netdev@...r.kernel.org>,
linux-oxnas@...ts.tuxfamily.org,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
devicetree <devicetree@...r.kernel.org>
Subject: Re: [PATCH] net: stmmac: Add OXNAS Glue Driver
On 10/31/2016 11:20 AM, Joachim Eastwood wrote:
> Hi Neil,
>
> On 31 October 2016 at 10:55, Neil Armstrong <narmstrong@...libre.com> wrote:
>> On 10/30/2016 09:41 PM, Rob Herring wrote:
>>> On Fri, Oct 21, 2016 at 10:44:45AM +0200, Neil Armstrong wrote:
>>>> Add Synopsys Designware MAC Glue layer for the Oxford Semiconductor OX820.
>>>>
>>>> Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
>>>> ---
>>>> .../devicetree/bindings/net/oxnas-dwmac.txt | 44 +++++
>>>
>>> It's preferred that bindings are a separate patch.
>>
>> OK
>>
>>>
>>>> drivers/net/ethernet/stmicro/stmmac/Kconfig | 11 ++
>>>> drivers/net/ethernet/stmicro/stmmac/Makefile | 1 +
>>>> drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c | 219 +++++++++++++++++++++
>>>> 4 files changed, 275 insertions(+)
>>>> create mode 100644 Documentation/devicetree/bindings/net/oxnas-dwmac.txt
>>>> create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c
>>>>
>>>> Changes since RFC at https://patchwork.kernel.org/patch/9387257 :
>>>> - Drop init/exit callbacks
>>>> - Implement proper remove and PM callback
>>>> - Call init from probe
>>>> - Disable/Unprepare clock if stmmac probe fails
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt
>>>> new file mode 100644
>>>> index 0000000..5d2696c
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt
>>>> @@ -0,0 +1,44 @@
>>>> +* Oxford Semiconductor OXNAS DWMAC Ethernet controller
>>>> +
>>>> +The device inherits all the properties of the dwmac/stmmac devices
>>>> +described in the file stmmac.txt in the current directory with the
>>>> +following changes.
>>>> +
>>>> +Required properties on all platforms:
>>>> +
>>>> +- compatible: Depending on the platform this should be one of:
>>>> + - "oxsemi,ox820-dwmac"
>>>> + Additionally "snps,dwmac" and any applicable more
>>>> + detailed version number described in net/stmmac.txt
>>>> + should be used.
>>>
>>> You should be explicit what version applies to ox820. "snps,dwmac"
>>> should probably be deprecated IMO. There are so many variations of DW
>>> h/w.
>>
>> Well, to be honest I have absolutely no idea ! But I will try to find out...
>
> You can see in the boot log:
>
> From lpc18xx boot:
> [ 3.242253] stmmac - user ID: 0x11, Synopsys ID: 0x36
> [ 3.247653] Ring mode enabled
> [ 3.251491] DMA HW capability register supported
> [ 3.256336] Enhanced/Alternate descriptors
> [ 3.261537] Enabled extended descriptors
> [ 3.265968] RX Checksum Offload Engine supported (type 2)
> [ 3.272249] TX Checksum insertion supported
> [ 3.276874] Wake-Up On Lan supported
> [ 3.283743] Enable RX Mitigation via HW Watchdog Timer
> [ 3.326701] libphy: stmmac: probed
>
> Synopsys ID: 0x36 and user UD: 0x11, gives us DWMAC version 3.611
>
>
> regards,
> Joachim Eastwood
>
OK, thanks !
stmmac - user ID: 0x12, Synopsys ID: 0x35
Neil
Powered by blists - more mailing lists