[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <e1634bd6-ae3a-b757-4947-7884807457b8@baylibre.com>
Date: Mon, 31 Oct 2016 15:23:29 +0100
From: Neil Armstrong <narmstrong@...libre.com>
To: Andrew Lunn <andrew@...n.ch>
Cc: khilman@...libre.com, carlo@...one.org, linus.walleij@...aro.org,
linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-amlogic@...ts.infradead.org, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org
Subject: Re: [RFC PATCH 08/13] dwmac-meson8b: add support for phy selection
On 10/21/2016 06:08 PM, Andrew Lunn wrote:
> Hi Neil
>
>> Yes this would be a good idea if we were able to scan the internal
>> and external PHYs at the same time, but with our limited knowledge
>> the values we write in the register seems to switch a mux for the
>> whole RMII and MDIO signals to either interface.
>
> Ah, O.K. So you need something like:
>
> drivers/net/phy/mdio-mux-mmioreg.c
>
> This seems to be limited to a single byte for the mux register, so you
> might need to make some extensions.
>
> Andrew
>
Thanks for the hint, I will try to make use of this !
Neil
Powered by blists - more mailing lists