netdev - Re: [PATCH v3 0/6] add NS2 support to bgmac

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 1 Nov 2016 11:01:19 -0700
From:   Scott Branden <scott.branden@...adcom.com>
To:     Jon Mason <jon.mason@...adcom.com>,
        David Miller <davem@...emloft.net>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Florian Fainelli <f.fainelli@...il.com>
Cc:     rafal@...ecki.pl, bcm-kernel-feedback-list@...adcom.com,
        netdev@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 0/6] add NS2 support to bgmac

Hi Jon,

On 16-11-01 10:51 AM, Jon Mason wrote:
> Changes in v3:
> * Clean-up the bgmac DT binding doc (per Rob Herring)
> * Document the lane swap binding and make it generic (Per Andrew Lunn)
Where is the documentation of the lane swap binding?

>
>
> Changes in v2:
> * Remove the PHY power-on (per Andrew Lunn)
> * Misc PHY clean-ups regarding comments and #defines (per Andrew Lunn)
>   This results on none of the original PHY code from Vikas being
>   present.  So, I'm removing him as an author and giving him
>   "Inspired-by" credit.
> * Move PHY lane swapping to PHY driver (per Andrew Lunn and Florian
>   Fainelli)
> * Remove bgmac sleep (per Florian Fainelli)
> * Re-add bgmac chip reset (per Florian Fainelli and Ray Jui)
> * Rebased on latest net-next
> * Added patch for bcm54xx_auxctl_read, which is used in the BCM54810
>
>
> Add support for the amac found in the Broadcom Northstar2 SoC to the
> bgmac driver.  This necessitates adding support to connect to an
> externally defined phy (as described in the device tree) in the driver.
> These phy changes are in addition to the changes necessary to get NS2
> working.
>
>
> Jon Mason (6):
>   net: phy: broadcom: add bcm54xx_auxctl_read
>   net: phy: broadcom: Add BCM54810 PHY entry
>   Documentation: devicetree: net: add NS2 bindings to amac
>   net: ethernet: bgmac: device tree phy enablement
>   net: ethernet: bgmac: add NS2 support
>   arm64: dts: NS2: add AMAC ethernet support
>
>  .../devicetree/bindings/net/brcm,amac.txt          |  16 ++--
>  arch/arm64/boot/dts/broadcom/ns2-svk.dts           |   5 ++
>  arch/arm64/boot/dts/broadcom/ns2.dtsi              |  12 +++
>  drivers/net/ethernet/broadcom/bgmac-bcma.c         |  48 ++++++++++
>  drivers/net/ethernet/broadcom/bgmac-platform.c     | 100 ++++++++++++++++++++-
>  drivers/net/ethernet/broadcom/bgmac.c              |  55 ++----------
>  drivers/net/ethernet/broadcom/bgmac.h              |   8 ++
>  drivers/net/phy/Kconfig                            |   2 +-
>  drivers/net/phy/broadcom.c                         |  68 +++++++++++++-
>  include/linux/brcmphy.h                            |  11 +++
>  10 files changed, 268 insertions(+), 57 deletions(-)
>