[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <9235D6609DB808459E95D78E17F2E43D4095D3D8@CHN-SV-EXMX02.mchp-main.com>
Date: Tue, 1 Nov 2016 20:02:00 +0000
From: <Woojung.Huh@...rochip.com>
To: <davem@...emloft.net>, <netdev@...r.kernel.org>
CC: <f.fainelli@...il.com>, <andrew@...n.ch>,
<UNGLinuxDriver@...rochip.com>
Subject: [PATCH v4 net-next] lan78xx: Use irq_domain for phy interrupt from
USB Int. EP
From: Woojung Huh <woojung.huh@...rochip.com>
To utilize phylib with interrupt fully than handling some of phy stuff in the MAC driver,
create irq_domain for USB interrupt EP of phy interrupt and
pass the irq number to phy_connect_direct() instead of PHY_IGNORE_INTERRUPT.
Idea comes from drivers/gpio/gpio-dl2.c
Signed-off-by: Woojung Huh <woojung.huh@...rochip.com>
---
drivers/net/usb/lan78xx.c | 215 ++++++++++++++++++++++++++++++++++++++++------
1 file changed, 189 insertions(+), 26 deletions(-)
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index c4e748e..bcd9010 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -30,13 +30,17 @@
#include <linux/ipv6.h>
#include <linux/mdio.h>
#include <net/ip6_checksum.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
#include <linux/microchipphy.h>
#include "lan78xx.h"
#define DRIVER_AUTHOR "WOOJUNG HUH <woojung.huh@...rochip.com>"
#define DRIVER_DESC "LAN78XX USB 3.0 Gigabit Ethernet Devices"
#define DRIVER_NAME "lan78xx"
-#define DRIVER_VERSION "1.0.4"
+#define DRIVER_VERSION "1.0.5"
#define TX_TIMEOUT_JIFFIES (5 * HZ)
#define THROTTLE_JIFFIES (HZ / 8)
@@ -89,6 +93,38 @@
/* statistic update interval (mSec) */
#define STAT_UPDATE_TIMER (1 * 1000)
+/* defines interrupts from interrupt EP */
+#define MAX_INT_EP (32)
+#define INT_EP_INTEP (31)
+#define INT_EP_OTP_WR_DONE (28)
+#define INT_EP_EEE_TX_LPI_START (26)
+#define INT_EP_EEE_TX_LPI_STOP (25)
+#define INT_EP_EEE_RX_LPI (24)
+#define INT_EP_MAC_RESET_TIMEOUT (23)
+#define INT_EP_RDFO (22)
+#define INT_EP_TXE (21)
+#define INT_EP_USB_STATUS (20)
+#define INT_EP_TX_DIS (19)
+#define INT_EP_RX_DIS (18)
+#define INT_EP_PHY (17)
+#define INT_EP_DP (16)
+#define INT_EP_MAC_ERR (15)
+#define INT_EP_TDFU (14)
+#define INT_EP_TDFO (13)
+#define INT_EP_UTX (12)
+#define INT_EP_GPIO_11 (11)
+#define INT_EP_GPIO_10 (10)
+#define INT_EP_GPIO_9 (9)
+#define INT_EP_GPIO_8 (8)
+#define INT_EP_GPIO_7 (7)
+#define INT_EP_GPIO_6 (6)
+#define INT_EP_GPIO_5 (5)
+#define INT_EP_GPIO_4 (4)
+#define INT_EP_GPIO_3 (3)
+#define INT_EP_GPIO_2 (2)
+#define INT_EP_GPIO_1 (1)
+#define INT_EP_GPIO_0 (0)
+
static const char lan78xx_gstrings[][ETH_GSTRING_LEN] = {
"RX FCS Errors",
"RX Alignment Errors",
@@ -296,6 +332,15 @@ struct statstage {
struct lan78xx_statstage64 curr_stat;
};
+struct irq_domain_data {
+ struct irq_domain *irqdomain;
+ unsigned int phyirq;
+ struct irq_chip *irqchip;
+ irq_flow_handler_t irq_handler;
+ u32 irqenable;
+ struct mutex irq_lock; /* for irq bus access */
+};
+
struct lan78xx_net {
struct net_device *net;
struct usb_device *udev;
@@ -351,6 +396,8 @@ struct lan78xx_net {
int delta;
struct statstage stats;
+
+ struct irq_domain_data domain_data;
};
/* use ethtool to change the level for any given device */
@@ -1096,11 +1143,6 @@ static int lan78xx_link_reset(struct lan78xx_net *dev)
int ladv, radv, ret;
u32 buf;
- /* clear PHY interrupt status */
- ret = phy_read(phydev, LAN88XX_INT_STS);
- if (unlikely(ret < 0))
- return -EIO;
-
/* clear LAN78xx interrupt status */
ret = lan78xx_write_reg(dev, INT_STS, INT_STS_PHY_INT_);
if (unlikely(ret < 0))
@@ -1120,16 +1162,12 @@ static int lan78xx_link_reset(struct lan78xx_net *dev)
if (unlikely(ret < 0))
return -EIO;
- phy_mac_interrupt(phydev, 0);
-
del_timer(&dev->stat_monitor);
} else if (phydev->link && !dev->link_on) {
dev->link_on = true;
phy_ethtool_ksettings_get(phydev, &ecmd);
- ret = phy_read(phydev, LAN88XX_INT_STS);
-
if (dev->udev->speed == USB_SPEED_SUPER) {
if (ecmd.base.speed == 1000) {
/* disable U2 */
@@ -1163,7 +1201,6 @@ static int lan78xx_link_reset(struct lan78xx_net *dev)
ret = lan78xx_update_flowcontrol(dev, ecmd.base.duplex, ladv,
radv);
- phy_mac_interrupt(phydev, 1);
if (!timer_pending(&dev->stat_monitor)) {
dev->delta = 1;
@@ -1202,7 +1239,10 @@ static void lan78xx_status(struct lan78xx_net *dev, struct urb *urb)
if (intdata & INT_ENP_PHY_INT) {
netif_dbg(dev, link, dev->net, "PHY INTR: 0x%08x\n", intdata);
- lan78xx_defer_kevent(dev, EVENT_LINK_RESET);
+ lan78xx_defer_kevent(dev, EVENT_LINK_RESET);
+
+ if (dev->domain_data.phyirq > 0)
+ generic_handle_irq(dev->domain_data.phyirq);
} else
netdev_warn(dev->net,
"unexpected interrupt: 0x%08x\n", intdata);
@@ -1844,6 +1884,127 @@ static void lan78xx_link_status_change(struct net_device *net)
}
}
+static int irq_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ struct irq_domain_data *data = d->host_data;
+
+ irq_set_chip_data(irq, data);
+ irq_set_chip_and_handler(irq, data->irqchip, data->irq_handler);
+ irq_set_noprobe(irq);
+
+ return 0;
+}
+
+static void irq_unmap(struct irq_domain *d, unsigned int irq)
+{
+ irq_set_chip_and_handler(irq, NULL, NULL);
+ irq_set_chip_data(irq, NULL);
+}
+
+static const struct irq_domain_ops chip_domain_ops = {
+ .map = irq_map,
+ .unmap = irq_unmap,
+};
+
+static void lan78xx_irq_mask(struct irq_data *irqd)
+{
+ struct irq_domain_data *data = irq_data_get_irq_chip_data(irqd);
+
+ data->irqenable &= ~BIT(irqd_to_hwirq(irqd));
+}
+
+static void lan78xx_irq_unmask(struct irq_data *irqd)
+{
+ struct irq_domain_data *data = irq_data_get_irq_chip_data(irqd);
+
+ data->irqenable |= BIT(irqd_to_hwirq(irqd));
+}
+
+static void lan78xx_irq_bus_lock(struct irq_data *irqd)
+{
+ struct irq_domain_data *data = irq_data_get_irq_chip_data(irqd);
+
+ mutex_lock(&data->irq_lock);
+}
+
+static void lan78xx_irq_bus_sync_unlock(struct irq_data *irqd)
+{
+ struct irq_domain_data *data = irq_data_get_irq_chip_data(irqd);
+ struct lan78xx_net *dev =
+ container_of(data, struct lan78xx_net, domain_data);
+ u32 buf;
+ int ret;
+
+ /* call register access here because irq_bus_lock & irq_bus_sync_unlock
+ * are only two callbacks executed in non-atomic contex.
+ */
+ ret = lan78xx_read_reg(dev, INT_EP_CTL, &buf);
+ if (buf != data->irqenable)
+ ret = lan78xx_write_reg(dev, INT_EP_CTL, data->irqenable);
+
+ mutex_unlock(&data->irq_lock);
+}
+
+static struct irq_chip lan78xx_irqchip = {
+ .name = "lan78xx-irqs",
+ .irq_mask = lan78xx_irq_mask,
+ .irq_unmask = lan78xx_irq_unmask,
+ .irq_bus_lock = lan78xx_irq_bus_lock,
+ .irq_bus_sync_unlock = lan78xx_irq_bus_sync_unlock,
+};
+
+static int lan78xx_setup_irq_domain(struct lan78xx_net *dev)
+{
+ struct device_node *of_node;
+ struct irq_domain *irqdomain;
+ unsigned int irqmap = 0;
+ u32 buf;
+ int ret = 0;
+
+ of_node = dev->udev->dev.parent->of_node;
+
+ mutex_init(&dev->domain_data.irq_lock);
+
+ lan78xx_read_reg(dev, INT_EP_CTL, &buf);
+ dev->domain_data.irqenable = buf;
+
+ dev->domain_data.irqchip = &lan78xx_irqchip;
+ dev->domain_data.irq_handler = handle_simple_irq;
+
+ irqdomain = irq_domain_add_simple(of_node, MAX_INT_EP, 0,
+ &chip_domain_ops, &dev->domain_data);
+ if (irqdomain) {
+ /* create mapping for PHY interrupt */
+ irqmap = irq_create_mapping(irqdomain, INT_EP_PHY);
+ if (!irqmap) {
+ irq_domain_remove(irqdomain);
+
+ irqdomain = NULL;
+ ret = -EINVAL;
+ }
+ } else {
+ ret = -EINVAL;
+ }
+
+ dev->domain_data.irqdomain = irqdomain;
+ dev->domain_data.phyirq = irqmap;
+
+ return ret;
+}
+
+static void lan78xx_remove_irq_domain(struct lan78xx_net *dev)
+{
+ if (dev->domain_data.phyirq > 0) {
+ irq_dispose_mapping(dev->domain_data.phyirq);
+
+ if (dev->domain_data.irqdomain)
+ irq_domain_remove(dev->domain_data.irqdomain);
+ }
+ dev->domain_data.phyirq = 0;
+ dev->domain_data.irqdomain = NULL;
+}
+
static int lan78xx_phy_init(struct lan78xx_net *dev)
{
int ret;
@@ -1856,15 +2017,12 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
return -EIO;
}
- /* Enable PHY interrupts.
- * We handle our own interrupt
- */
- ret = phy_read(phydev, LAN88XX_INT_STS);
- ret = phy_write(phydev, LAN88XX_INT_MASK,
- LAN88XX_INT_MASK_MDINTPIN_EN_ |
- LAN88XX_INT_MASK_LINK_CHANGE_);
-
- phydev->irq = PHY_IGNORE_INTERRUPT;
+ /* if phyirq is not set, use polling mode in phylib */
+ if (dev->domain_data.phyirq > 0)
+ phydev->irq = dev->domain_data.phyirq;
+ else
+ phydev->irq = 0;
+ netdev_dbg(dev->net, "phydev->irq = %d\n", phydev->irq);
ret = phy_connect_direct(dev->net, phydev,
lan78xx_link_status_change,
@@ -2255,11 +2413,6 @@ static int lan78xx_reset(struct lan78xx_net *dev)
buf |= MAC_CR_AUTO_DUPLEX_ | MAC_CR_AUTO_SPEED_;
ret = lan78xx_write_reg(dev, MAC_CR, buf);
- /* enable PHY interrupts */
- ret = lan78xx_read_reg(dev, INT_EP_CTL, &buf);
- buf |= INT_ENP_PHY_INT;
- ret = lan78xx_write_reg(dev, INT_EP_CTL, buf);
-
ret = lan78xx_read_reg(dev, MAC_TX, &buf);
buf |= MAC_TX_TXEN_;
ret = lan78xx_write_reg(dev, MAC_TX, buf);
@@ -2668,6 +2821,14 @@ static int lan78xx_bind(struct lan78xx_net *dev, struct usb_interface *intf)
dev->net->hw_features = dev->net->features;
+ ret = lan78xx_setup_irq_domain(dev);
+ if (ret < 0) {
+ netdev_warn(dev->net,
+ "lan78xx_setup_irq_domain() failed : %d", ret);
+ kfree(pdata);
+ return ret;
+ }
+
/* Init all registers */
ret = lan78xx_reset(dev);
@@ -2684,6 +2845,8 @@ static void lan78xx_unbind(struct lan78xx_net *dev, struct usb_interface *intf)
{
struct lan78xx_priv *pdata = (struct lan78xx_priv *)(dev->data[0]);
+ lan78xx_remove_irq_domain(dev);
+
lan78xx_remove_mdio(dev);
if (pdata) {
--
2.7.4
Powered by blists - more mailing lists