[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <8c491fff-4849-fa9b-0a0a-5a7a6870120d@gmail.com>
Date: Fri, 4 Nov 2016 09:23:20 -0700
From: Florian Fainelli <f.fainelli@...il.com>
To: Sebastian Frias <sf84@...oste.net>,
Måns Rullgård <mans@...sr.com>,
"David S. Miller" <davem@...emloft.net>,
netdev <netdev@...r.kernel.org>
Cc: LKML <linux-kernel@...r.kernel.org>, Mason <slash.tmp@...e.fr>,
Andrew Lunn <andrew@...n.ch>
Subject: Re: [PATCH 2/2] net: ethernet: nb8800: handle all RGMII declinations
On 11/04/2016 08:05 AM, Sebastian Frias wrote:
> Commit a999589ccaae ("phylib: add RGMII-ID interface mode definition")
> and commit 7d400a4c5897 ("phylib: add PHY interface modes for internal
> delay for tx and rx only") added several RGMII declinations:
> PHY_INTERFACE_MODE_RGMII_ID, PHY_INTERFACE_MODE_RGMII_RXID and
> PHY_INTERFACE_MODE_RGMII_TXID to deal with internal delays.
>
> Those are all RGMII modes (1Gbit) and must be considered that way when
> setting the MAC Mode or the Pads Mode for the HW to work properly.
>
> Signed-off-by: Sebastian Frias <sf84@...oste.net>
> ---
> drivers/net/ethernet/aurora/nb8800.c | 10 ++++++----
> 1 file changed, 6 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/ethernet/aurora/nb8800.c b/drivers/net/ethernet/aurora/nb8800.c
> index d2855c9..6230ace 100644
> --- a/drivers/net/ethernet/aurora/nb8800.c
> +++ b/drivers/net/ethernet/aurora/nb8800.c
> @@ -609,7 +609,10 @@ static void nb8800_mac_config(struct net_device *dev)
> mac_mode |= HALF_DUPLEX;
>
> if (gigabit) {
> - if (priv->phy_mode == PHY_INTERFACE_MODE_RGMII)
> + if (priv->phy_mode == PHY_INTERFACE_MODE_RGMII ||
> + priv->phy_mode == PHY_INTERFACE_MODE_RGMII_ID ||
> + priv->phy_mode == PHY_INTERFACE_MODE_RGMII_RXID ||
> + priv->phy_mode == PHY_INTERFACE_MODE_RGMII_TXID)
phy_interface_is_rgmii(phydev)?
> mac_mode |= RGMII_MODE;
>
> mac_mode |= GMAC_MODE;
> @@ -1278,9 +1281,8 @@ static int nb8800_tangox_init(struct net_device *dev)
> break;
>
> case PHY_INTERFACE_MODE_RGMII:
> - pad_mode = PAD_MODE_RGMII;
> - break;
> -
> + case PHY_INTERFACE_MODE_RGMII_ID:
> + case PHY_INTERFACE_MODE_RGMII_RXID:
> case PHY_INTERFACE_MODE_RGMII_TXID:
> pad_mode = PAD_MODE_RGMII;
> break;
>
--
Florian
Powered by blists - more mailing lists