[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1478537501-23454-2-git-send-email-timur@codeaurora.org>
Date: Mon, 7 Nov 2016 10:51:40 -0600
From: Timur Tabi <timur@...eaurora.org>
To: David Miller <davem@...emloft.net>,
Florian Fainelli <f.fainelli@...il.com>, alokc@...eaurora.org,
netdev@...r.kernel.org
Subject: [PATCH 1/2] net: qcom/emac: configure the external phy to allow pause frames
Pause frames are used to enable flow control. A MAC can send and
receive pause frames in order to throttle traffic. However, the PHY
must be configured to allow those frames to pass through.
Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
Signed-off-by: Timur Tabi <timur@...eaurora.org>
---
drivers/net/ethernet/qualcomm/emac/emac-mac.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/ethernet/qualcomm/emac/emac-mac.c b/drivers/net/ethernet/qualcomm/emac/emac-mac.c
index 6fb3bee..70a55dc 100644
--- a/drivers/net/ethernet/qualcomm/emac/emac-mac.c
+++ b/drivers/net/ethernet/qualcomm/emac/emac-mac.c
@@ -1003,6 +1003,12 @@ int emac_mac_up(struct emac_adapter *adpt)
writel((u32)~DIS_INT, adpt->base + EMAC_INT_STATUS);
writel(adpt->irq.mask, adpt->base + EMAC_INT_MASK);
+ /* Enable pause frames. Without this feature, the EMAC has been shown
+ * to receive (and drop) frames with FCS errors at gigabit connections.
+ */
+ adpt->phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
+ adpt->phydev->advertising |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
+
adpt->phydev->irq = PHY_IGNORE_INTERRUPT;
phy_start(adpt->phydev);
--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm
Technologies, Inc. Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
Powered by blists - more mailing lists