[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1478780813-20005-1-git-send-email-david.lebrun@uclouvain.be>
Date: Thu, 10 Nov 2016 13:26:53 +0100
From: David Lebrun <david.lebrun@...ouvain.be>
To: <netdev@...r.kernel.org>
CC: <lorenzo@...gle.com>, <davem@...emloft.net>,
David Lebrun <david.lebrun@...ouvain.be>
Subject: [PATCH net-next v2] ipv6: sr: fix IPv6 initialization failure without lwtunnels
v2: fix conditional compilation for seg6_iptunnel.o in Makefile
This patch compiles SR lwtunnels support only if CONFIG_LWTUNNEL=y.
If IPv6 is enabled and CONFIG_LWTUNNEL=n, then seg6_iptunnel_init()
fails with EOPNOTSUPP which in turn makes seg6_init() fail, blocking
the IPv6 initialization, with the following messages:
NET: Registered protocol family 10
IPv6: Attempt to unregister permanent protocol 6
IPv6: Attempt to unregister permanent protocol 136
IPv6: Attempt to unregister permanent protocol 17
NET: Unregistered protocol family 10
Fix commit 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Tested with various combinations of CONFIG_IPV6 and CONFIG_LWTUNNEL.
Reported-by: Lorenzo Colitti <lorenzo@...gle.com>
Signed-off-by: David Lebrun <david.lebrun@...ouvain.be>
---
net/ipv6/Kconfig | 1 +
net/ipv6/Makefile | 3 ++-
net/ipv6/seg6.c | 8 ++++++++
3 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig
index 0f00811..030cdb6 100644
--- a/net/ipv6/Kconfig
+++ b/net/ipv6/Kconfig
@@ -292,6 +292,7 @@ config IPV6_PIMSM_V2
config IPV6_SEG6_INLINE
bool "IPv6: direct Segment Routing Header insertion "
depends on IPV6
+ depends on LWTUNNEL
---help---
Support for direct insertion of the Segment Routing Header,
also known as inline mode. Be aware that direct insertion of
diff --git a/net/ipv6/Makefile b/net/ipv6/Makefile
index 129cad2..8979d53 100644
--- a/net/ipv6/Makefile
+++ b/net/ipv6/Makefile
@@ -9,7 +9,7 @@ ipv6-objs := af_inet6.o anycast.o ip6_output.o ip6_input.o addrconf.o \
route.o ip6_fib.o ipv6_sockglue.o ndisc.o udp.o udplite.o \
raw.o icmp.o mcast.o reassembly.o tcp_ipv6.o ping.o \
exthdrs.o datagram.o ip6_flowlabel.o inet6_connection_sock.o \
- udp_offload.o seg6.o seg6_iptunnel.o
+ udp_offload.o seg6.o
ipv6-offload := ip6_offload.o tcpv6_offload.o exthdrs_offload.o
@@ -53,5 +53,6 @@ obj-$(subst m,y,$(CONFIG_IPV6)) += inet6_hashtables.o
ifneq ($(CONFIG_IPV6),)
obj-$(CONFIG_NET_UDP_TUNNEL) += ip6_udp_tunnel.o
+obj-$(CONFIG_LWTUNNEL) += seg6_iptunnel.o
obj-y += mcast_snoop.o
endif
diff --git a/net/ipv6/seg6.c b/net/ipv6/seg6.c
index 50f6e06..0f74f90 100644
--- a/net/ipv6/seg6.c
+++ b/net/ipv6/seg6.c
@@ -451,9 +451,11 @@ int __init seg6_init(void)
if (err)
goto out_unregister_genl;
+#ifdef CONFIG_LWTUNNEL
err = seg6_iptunnel_init();
if (err)
goto out_unregister_pernet;
+#endif
#ifdef CONFIG_IPV6_SEG6_HMAC
err = seg6_hmac_init();
@@ -467,10 +469,14 @@ int __init seg6_init(void)
return err;
#ifdef CONFIG_IPV6_SEG6_HMAC
out_unregister_iptun:
+#ifdef CONFIG_LWTUNNEL
seg6_iptunnel_exit();
#endif
+#endif
+#ifdef CONFIG_LWTUNNEL
out_unregister_pernet:
unregister_pernet_subsys(&ip6_segments_ops);
+#endif
out_unregister_genl:
genl_unregister_family(&seg6_genl_family);
goto out;
@@ -481,7 +487,9 @@ void seg6_exit(void)
#ifdef CONFIG_IPV6_SEG6_HMAC
seg6_hmac_exit();
#endif
+#ifdef CONFIG_LWTUNNEL
seg6_iptunnel_exit();
+#endif
unregister_pernet_subsys(&ip6_segments_ops);
genl_unregister_family(&seg6_genl_family);
}
--
2.7.3
Powered by blists - more mailing lists