netdev - [PATCH v2 2/2] bnx2: Wait for in-flight DMA to complete at probe stage

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1479013293-21001-3-git-send-email-bhe@redhat.com>
Date:   Sun, 13 Nov 2016 13:01:33 +0800
From:   Baoquan He <bhe@...hat.com>
To:     netdev@...r.kernel.org, michael.chan@...adcom.com,
        davem@...emloft.net
Cc:     linux-kernel@...r.kernel.org, Dept-GELinuxNICDev@...ium.com,
        rasesh.mody@...ium.com, harish.patil@...ium.com,
        frank@...ermydesk.org, jsr@....edzone.net, pmenzel@...gen.mpg.de,
        jroedel@...e.de, dyoung@...hat.com, Baoquan He <bhe@...hat.com>
Subject: [PATCH v2 2/2] bnx2: Wait for in-flight DMA to complete at probe stage

In-flight DMA from 1st kernel could continue going in kdump kernel.
New io-page table has been created before bnx2 does reset at open stage.
We have to wait for the in-flight DMA to complete to avoid it look up
into the newly created io-page table at probe stage.

Suggested-by: Michael Chan <michael.chan@...adcom.com>
Signed-off-by: Baoquan He <bhe@...hat.com>
---
 drivers/net/ethernet/broadcom/bnx2.c | 38 ++++++++++++++++++++++++++++++------
 1 file changed, 32 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
index c557972..1f7034d 100644
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -49,6 +49,7 @@
 #include <linux/firmware.h>
 #include <linux/log2.h>
 #include <linux/aer.h>
+#include <linux/crash_dump.h>
 
 #if IS_ENABLED(CONFIG_CNIC)
 #define BCM_CNIC 1
@@ -4764,15 +4765,16 @@ bnx2_setup_msix_tbl(struct bnx2 *bp)
 	BNX2_WR(bp, BNX2_PCI_GRC_WINDOW3_ADDR, BNX2_MSIX_PBA_ADDR);
 }
 
-static int
-bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
+static void
+bnx2_wait_dma_complete(struct bnx2 *bp)
 {
 	u32 val;
-	int i, rc = 0;
-	u8 old_port;
+	int i;
 
-	/* Wait for the current PCI transaction to complete before
-	 * issuing a reset. */
+	/*
+	 * Wait for the current PCI transaction to complete before
+	 * issuing a reset.
+	 */
 	if ((BNX2_CHIP(bp) == BNX2_CHIP_5706) ||
 	    (BNX2_CHIP(bp) == BNX2_CHIP_5708)) {
 		BNX2_WR(bp, BNX2_MISC_ENABLE_CLR_BITS,
@@ -4796,6 +4798,21 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
 		}
 	}
 
+	return;
+}
+
+
+static int
+bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
+{
+	u32 val;
+	int i, rc = 0;
+	u8 old_port;
+
+	/* Wait for the current PCI transaction to complete before
+	 * issuing a reset. */
+	bnx2_wait_dma_complete(bp);
+
 	/* Wait for the firmware to tell us it is ok to issue a reset. */
 	bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT0 | reset_code, 1, 1);
 
@@ -8580,6 +8597,15 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	pci_set_drvdata(pdev, dev);
 
+	/*
+	 * In-flight DMA from 1st kernel could continue going in kdump kernel.
+	 * New io-page table has been created before bnx2 does reset at open stage.
+	 * We have to wait for the in-flight DMA to complete to avoid it look up
+	 * into the newly created io-page table.
+	 */
+	if (is_kdump_kernel())
+		bnx2_wait_dma_complete(bp);
+
 	memcpy(dev->dev_addr, bp->mac_addr, ETH_ALEN);
 
 	dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG |
-- 
2.5.5