netdev - Re: [PATCH 0/2] bnx2: Hard reset bnx2 chip at probe stage

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20161113041017.GE15325@x1>
Date:   Sun, 13 Nov 2016 12:10:17 +0800
From:   Baoquan He <bhe@...hat.com>
To:     Michael Chan <michael.chan@...adcom.com>
Cc:     Netdev <netdev@...r.kernel.org>,
        open list <linux-kernel@...r.kernel.org>,
        Dept-GELinuxNICDev@...ium.com, rasesh.mody@...ium.com,
        harish.patil@...ium.com, frank@...ermydesk.org, jsr@....edzone.net,
        pmenzel@...gen.mpg.de, jroedel@...e.de, dyoung@...hat.com
Subject: Re: [PATCH 0/2] bnx2: Hard reset bnx2 chip at probe stage

Hi Michael,


On 11/11/16 at 09:37am, Michael Chan wrote:
> On Fri, Nov 11, 2016 at 6:02 AM, Baoquan He <bhe@...hat.com> wrote:
> > On 11/11/16 at 09:46pm, Baoquan He wrote:
> >> Hi bnx2 experts,
> >>
> >> In commit 3e1be7a ("bnx2: Reset device during driver initialization"),
> >> firmware requesting code was moved from open stage to probe stage.
> >> The reason is in kdump kernel hardware iommu need device be reset in
> >> driver probe stage, otherwise those in-flight DMA from 1st kernel
> >> will continue going and look up into the newly created io-page tables.
> >> So we need reset device to stop in-flight DMA as early as possibe.
> >>
> >> But with commit 3e1be7a merged, people reported their bnx2 driver init
> >> failed because of failed firmware loading. After discussion, it's found
> >> that they built bnx2 driver into kernel, and that makes probe function
> >> bnx2_init_one be called in do_initcalls(). But at this time the initramfs
> >> has not been uncompressed yet and mounted, kernel can't detect firmware.
> >>
> >> So there's only one way to cover both. Try to hard reset the bnx2 device
> >> at probe stage, without involving firmware issues. I tried to add function
> >> bnx2_hard_reset_chip() to do this and it's only called in kdump kernel.
> >> The thing is I am not quite familiar with bnx2 chip spec, just abstract
> >> code from bnx2_reset_chip, the testing result is good.
> >
> > Here I changed to send BNX2_MISC_COMMAND_HD_RESET in BNX2_CHIP_5709
> > case.
> >
> 
> From my old 5709 Documentation:
> 
> Bit 6 HD_RESET:  Writing this bit as 1 will cause the chip to do a
> hard reset like bit 5 except the sticky bits in the PCI function are
> not reset.
> 
> Bit 5 POR_RESET: Writing this bit as 1 will cause the chip to do an
> internal reset exactly like a power-up reset.  There is no protection
> for this request and it may cause any current PCI cycle to lock up.
> This reset is intended for use under manufacturing conditions only.
> 
> So it sounds like doing HD_RESET can potentially cause a PCI bus lock up.
> 
> Why not just disable DMA gracefully as done at the beginning of
> bnx2_reset_chip()?

Thanks for your suggestion.

If what I undertand is correct, you meant waiting for the current PCI
transaction to complete, right? I tried and it also works. I like this
idea, will repost v2. Please help check if it meets your thoughts.

Thanks
Baoquan