netdev - [PATCH ethtool v2 0/2] Adding downshift support to ethtool

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1479115787-1265-1-git-send-email-allan.nielsen@microsemi.com>
Date:   Mon, 14 Nov 2016 10:29:45 +0100
From:   "Allan W. Nielsen" <allan.nielsen@...rosemi.com>
To:     <netdev@...r.kernel.org>
CC:     <andrew@...n.ch>, <raju.lakkaraju@...rosemi.com>,
        <allan.nielsen@...rosemi.com>
Subject: [PATCH ethtool v2 0/2] Adding downshift support to ethtool

This is a follow-up on the patch series posted at Fri, 4 Nov 2016 11:27:31 +0100
(old cover letter included below).


The following is changed/added/addressed:
- Syntax is changed from "--set-phy-tunable downshift on|off|%d" to
  "--set-phy-tunable [downshift on|off [count N]]" - as requested by Andrew.
- Short description of downshifting is added to the man page.


Please review

Best regards
Allan and Raju

Raju Lakkaraju (2):
  ethtool-copy.h:sync with net
  Ethtool: Implements ETHTOOL_PHY_GTUNABLE/ETHTOOL_PHY_STUNABLE and PHY
    downshift

 ethtool-copy.h |  18 +++++++-
 ethtool.8.in   |  39 ++++++++++++++++
 ethtool.c      | 144 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 200 insertions(+), 1 deletion(-)

Old cover letter:
> From 5d926ca56f13e283aaa98e820d4720305be4da8f Mon Sep 17 00:00:00 2001
> From: "Allan W. Nielsen" <allan.nielsen@...rosemi.com>
> Date: Fri, 4 Nov 2016 11:27:31 +0100
> Subject: [PATCH ethtool 0/2] Adding downshift support to ethtool
> 
> Hi All,
> 
> This patch implements for set/get downshifting.
> 
> Downshifting can either be turned on/off, or it can be configured to a
> specifc count.
> 
> If no "count" are provided, then it is up to the individual PHY driver to
> configure a default count.

-- 
2.7.3