[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1479222844-20301-1-git-send-email-david.lebrun@uclouvain.be>
Date: Tue, 15 Nov 2016 16:14:04 +0100
From: David Lebrun <david.lebrun@...ouvain.be>
To: <netdev@...r.kernel.org>
CC: <lorenzo@...gle.com>, <davem@...emloft.net>,
<roopa@...ulusnetworks.com>,
David Lebrun <david.lebrun@...ouvain.be>
Subject: [PATCH net-next 1/1] ipv6: sr: add option to control lwtunnel support
This patch adds a new option CONFIG_IPV6_SEG6_LWTUNNEL to enable/disable
support of encapsulation with the lightweight tunnels. When this option
is enabled, CONFIG_LWTUNNEL is automatically selected.
Fix commit 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Without a proper option to control lwtunnel support for SR-IPv6, if
CONFIG_LWTUNNEL=n then the IPv6 initialization fails as a consequence
of seg6_iptunnel_init() failure with EOPNOTSUPP:
NET: Registered protocol family 10
IPv6: Attempt to unregister permanent protocol 6
IPv6: Attempt to unregister permanent protocol 136
IPv6: Attempt to unregister permanent protocol 17
NET: Unregistered protocol family 10
Tested (compiling, booting, and loading ipv6 module when relevant)
with possible combinations of CONFIG_IPV6={y,m,n},
CONFIG_IPV6_SEG6_LWTUNNEL={y,n} and CONFIG_LWTUNNEL={y,n}.
Reported-by: Lorenzo Colitti <lorenzo@...gle.com>
Suggested-by: Roopa Prabhu <roopa@...ulusnetworks.com>
Signed-off-by: David Lebrun <david.lebrun@...ouvain.be>
---
net/ipv6/Kconfig | 13 ++++++++++++-
net/ipv6/Makefile | 5 +++--
net/ipv6/seg6.c | 8 ++++++++
3 files changed, 23 insertions(+), 3 deletions(-)
diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig
index 0f00811..ec1267e 100644
--- a/net/ipv6/Kconfig
+++ b/net/ipv6/Kconfig
@@ -289,9 +289,20 @@ config IPV6_PIMSM_V2
Support for IPv6 PIM multicast routing protocol PIM-SMv2.
If unsure, say N.
+config IPV6_SEG6_LWTUNNEL
+ bool "IPv6: Segment Routing Header encapsulation support"
+ depends on IPV6
+ select LWTUNNEL
+ ---help---
+ Support for encapsulation of packets within an outer IPv6
+ header and a Segment Routing Header using the lightweight
+ tunnels mechanism.
+
+ If unsure, say N.
+
config IPV6_SEG6_INLINE
bool "IPv6: direct Segment Routing Header insertion "
- depends on IPV6
+ depends on IPV6_SEG6_LWTUNNEL
---help---
Support for direct insertion of the Segment Routing Header,
also known as inline mode. Be aware that direct insertion of
diff --git a/net/ipv6/Makefile b/net/ipv6/Makefile
index 129cad2..a9e9fec 100644
--- a/net/ipv6/Makefile
+++ b/net/ipv6/Makefile
@@ -9,7 +9,7 @@ ipv6-objs := af_inet6.o anycast.o ip6_output.o ip6_input.o addrconf.o \
route.o ip6_fib.o ipv6_sockglue.o ndisc.o udp.o udplite.o \
raw.o icmp.o mcast.o reassembly.o tcp_ipv6.o ping.o \
exthdrs.o datagram.o ip6_flowlabel.o inet6_connection_sock.o \
- udp_offload.o seg6.o seg6_iptunnel.o
+ udp_offload.o seg6.o
ipv6-offload := ip6_offload.o tcpv6_offload.o exthdrs_offload.o
@@ -23,6 +23,8 @@ ipv6-$(CONFIG_IPV6_MULTIPLE_TABLES) += fib6_rules.o
ipv6-$(CONFIG_PROC_FS) += proc.o
ipv6-$(CONFIG_SYN_COOKIES) += syncookies.o
ipv6-$(CONFIG_NETLABEL) += calipso.o
+ipv6-$(CONFIG_IPV6_SEG6_LWTUNNEL) += seg6_iptunnel.o
+ipv6-$(CONFIG_IPV6_SEG6_HMAC) += seg6_hmac.o
ipv6-objs += $(ipv6-y)
@@ -44,7 +46,6 @@ obj-$(CONFIG_IPV6_SIT) += sit.o
obj-$(CONFIG_IPV6_TUNNEL) += ip6_tunnel.o
obj-$(CONFIG_IPV6_GRE) += ip6_gre.o
obj-$(CONFIG_IPV6_FOU) += fou6.o
-obj-$(CONFIG_IPV6_SEG6_HMAC) += seg6_hmac.o
obj-y += addrconf_core.o exthdrs_core.o ip6_checksum.o ip6_icmp.o
obj-$(CONFIG_INET) += output_core.o protocol.o $(ipv6-offload)
diff --git a/net/ipv6/seg6.c b/net/ipv6/seg6.c
index 50f6e06..b172d85 100644
--- a/net/ipv6/seg6.c
+++ b/net/ipv6/seg6.c
@@ -451,9 +451,11 @@ int __init seg6_init(void)
if (err)
goto out_unregister_genl;
+#ifdef CONFIG_IPV6_SEG6_LWTUNNEL
err = seg6_iptunnel_init();
if (err)
goto out_unregister_pernet;
+#endif
#ifdef CONFIG_IPV6_SEG6_HMAC
err = seg6_hmac_init();
@@ -467,10 +469,14 @@ int __init seg6_init(void)
return err;
#ifdef CONFIG_IPV6_SEG6_HMAC
out_unregister_iptun:
+#ifdef CONFIG_IPV6_SEG6_LWTUNNEL
seg6_iptunnel_exit();
#endif
+#endif
+#ifdef CONFIG_IPV6_SEG6_LWTUNNEL
out_unregister_pernet:
unregister_pernet_subsys(&ip6_segments_ops);
+#endif
out_unregister_genl:
genl_unregister_family(&seg6_genl_family);
goto out;
@@ -481,7 +487,9 @@ void seg6_exit(void)
#ifdef CONFIG_IPV6_SEG6_HMAC
seg6_hmac_exit();
#endif
+#ifdef CONFIG_IPV6_SEG6_LWTUNNEL
seg6_iptunnel_exit();
+#endif
unregister_pernet_subsys(&ip6_segments_ops);
genl_unregister_family(&seg6_genl_family);
}
--
2.7.3
Powered by blists - more mailing lists