netdev - Re: [PATCH] net: dsa: fix fixed-link-phy device leaks

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <8387696c-813a-4c88-5f10-7d2e5fdae6b8@gmail.com>
Date:   Wed, 16 Nov 2016 10:14:10 -0800
From:   Florian Fainelli <f.fainelli@...il.com>
To:     Johan Hovold <johan@...nel.org>
Cc:     Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...oirfairelinux.com>,
        "David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH] net: dsa: fix fixed-link-phy device leaks

On 11/16/2016 09:11 AM, Johan Hovold wrote:
> On Wed, Nov 16, 2016 at 09:06:26AM -0800, Florian Fainelli wrote:
>> On 11/16/2016 06:47 AM, Johan Hovold wrote:
>>> Make sure to drop the reference taken by of_phy_find_device() when
>>> registering and deregistering the fixed-link PHY-device.
>>>
>>> Note that we need to put both references held at deregistration.
>>>
>>> Fixes: 39b0c705195e ("net: dsa: Allow configuration of CPU & DSA port
>>> speeds/duplex")
>>> Signed-off-by: Johan Hovold <johan@...nel.org>
>>> ---
>>>
>>> Hi,
>>>
>>> This is one has been compile tested only, but fixes a couple of leaks
>>> similar to one that was found in the cpsw driver for which I just posted
>>> a patch.
>>>
>>> It turns out all drivers but DSA fail to deregister the fixed-link PHYs
>>> registered by of_phy_register_fixed_link(). Due to the way this
>>> interface was designed, deregistering such a PHY is a bit cumbersome and
>>> looks like it would benefit from a common helper.
>>>
>>> However, perhaps the interface should instead be changed so that the PHY
>>> device is returned so that drivers do not need to use
>>> of_phy_find_device() when they need to access properties of the fixed
>>> link (e.g. as in dsu_cpu_dsa_setup below).
>>>
>>> Thoughts?
>>>
>>> Thanks,
>>> Johan
>>>
>>>
>>>  net/dsa/dsa.c | 8 +++++++-
>>>  1 file changed, 7 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
>>> index a6902c1e2f28..798a6a776a5f 100644
>>> --- a/net/dsa/dsa.c
>>> +++ b/net/dsa/dsa.c
>>> @@ -233,6 +233,8 @@ int dsa_cpu_dsa_setup(struct dsa_switch *ds, struct device *dev,
>>>  		genphy_read_status(phydev);
>>>  		if (ds->ops->adjust_link)
>>>  			ds->ops->adjust_link(ds, port, phydev);
>>> +
>>> +		phy_device_free(phydev);	/* of_phy_find_device */
>>>  	}
>>>  
>>>  	return 0;
>>> @@ -509,8 +511,12 @@ void dsa_cpu_dsa_destroy(struct device_node *port_dn)
>>>  	if (of_phy_is_fixed_link(port_dn)) {
>>>  		phydev = of_phy_find_device(port_dn);
>>>  		if (phydev) {
>>> -			phy_device_free(phydev);
>>>  			fixed_phy_unregister(phydev);
>>> +			/* Put references taken by of_phy_find_device() and
>>> +			 * of_phy_register_fixed_link().
>>> +			 */
>>> +			phy_device_free(phydev);
>>> +			phy_device_free(phydev);
>>
>> Double free, this looks bogus here. Actually would not this mean a
>> triple free since you already free in dsa_cpu_dsa_setup() which is
>> paired with dsa_cpu_dsa_destroy()?
> 
> The naming of phy_device_free() is unfortunate when it's really a put():
> 
> void phy_device_free(struct phy_device *phydev)
> {
> 	put_device(&phydev->mdio.dev);
> }

Indeed, should have looked a little harder.

> 
> which may need to be called multiple times, specifically after a call to
> of_phy_find_device() which takes another reference.
> 
> With this patch the refcounts are properly balanced.

The intent of your patch is good, but it still feels like having to
double imbalance the refcount is symptomatic of a larger issue here, it
does not seem like having several refcounts are necessary, so we may
really want to rework the API.
-- 
Florian