| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1479846737-18669-3-git-send-email-allan.nielsen@microsemi.com>
Date: Tue, 22 Nov 2016 21:32:17 +0100
From: "Allan W. Nielsen" <allan.nielsen@...rosemi.com>
To: <netdev@...r.kernel.org>
CC: <andrew@...n.ch>, <f.fainelli@...il.com>,
<raju.lakkaraju@...rosemi.com>, <allan.nielsen@...rosemi.com>,
Raju Lakkaraju <Raju.Lakkaraju@...rosemi.com>
Subject: [PATCH ethtool v4 2/2] Ethtool: Implements ETHTOOL_PHY_GTUNABLE/ETHTOOL_PHY_STUNABLE and PHY downshift
From: Raju Lakkaraju <Raju.Lakkaraju@...rosemi.com>
Add ethtool get and set tunable to access PHY drivers.
Ethtool Help: ethtool -h for PHY tunables
ethtool --set-phy-tunable DEVNAME Set PHY tunable
[ downshift on|off [count N] ]
ethtool --get-phy-tunable DEVNAME Get PHY tunable
[ downshift ]
Ethtool ex:
ethtool --set-phy-tunable eth0 downshift on
ethtool --set-phy-tunable eth0 downshift off
ethtool --set-phy-tunable eth0 downshift on count 2
ethtool --get-phy-tunable eth0 downshift
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@...rosemi.com>
Signed-off-by: Allan W. Nielsen <allan.nielsen@...rosemi.com>
Acked-by: Florian Fainelli <f.fainelli@...il.com>
Tested-by: Florian Fainelli <f.fainelli@...il.com>
---
ethtool.8.in | 40 +++++++++++++++++
ethtool.c | 144 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 184 insertions(+)
diff --git a/ethtool.8.in b/ethtool.8.in
index 9631847..5c36c06 100644
--- a/ethtool.8.in
+++ b/ethtool.8.in
@@ -340,6 +340,18 @@ ethtool \- query or control network driver and hardware settings
.B2 tx-lpi on off
.BN tx-timer
.BN advertise
+.HP
+.B ethtool \-\-set\-phy\-tunable
+.I devname
+.RB [
+.B downshift
+.A1 on off
+.BN count
+.RB ]
+.HP
+.B ethtool \-\-get\-phy\-tunable
+.I devname
+.RB [ downshift ]
.
.\" Adjust lines (i.e. full justification) and hyphenate.
.ad
@@ -947,6 +959,34 @@ Values are as for
Sets the amount of time the device should stay in idle mode prior to asserting
its Tx LPI (in microseconds). This has meaning only when Tx LPI is enabled.
.RE
+.TP
+.B \-\-set\-phy\-tunable
+Sets the PHY tunable parameters.
+.RS 4
+.TP
+.A2 downshift on off
+Specifies whether downshift should be enabled
+.TS
+nokeep;
+lB l.
+.BI count \ N
+Sets the PHY downshift re-tries count.
+.TE
+.PD
+.RE
+.TP
+.B \-\-get\-phy\-tunable
+Gets the PHY tunable parameters.
+.RS 4
+.TP
+.B downshift
+For operation in cabling environments that are incompatible with 1000BASE-T,
+PHY device provides an automatic link speed downshift operation.
+Link speed downshift after N failed 1000BASE-T auto-negotiation attempts.
+Downshift is useful where cable does not have the 4 pairs instance.
+
+Gets the PHY downshift count/status.
+.RE
.SH BUGS
Not supported (in part or whole) on all network drivers.
.SH AUTHOR
diff --git a/ethtool.c b/ethtool.c
index 49ac94e..7dcd005 100644
--- a/ethtool.c
+++ b/ethtool.c
@@ -4520,6 +4520,146 @@ static int do_seee(struct cmd_context *ctx)
return 0;
}
+static int do_get_phy_tunable(struct cmd_context *ctx)
+{
+ int argc = ctx->argc;
+ char **argp = ctx->argp;
+ int err, i;
+ u8 downshift_changed = 0;
+
+ if (argc < 1)
+ exit_bad_args();
+ for (i = 0; i < argc; i++) {
+ if (!strcmp(argp[i], "downshift")) {
+ downshift_changed = 1;
+ i += 1;
+ if (i < argc)
+ exit_bad_args();
+ } else {
+ exit_bad_args();
+ }
+ }
+
+ if (downshift_changed) {
+ struct ethtool_tunable ds;
+ u8 count = 0;
+
+ ds.cmd = ETHTOOL_PHY_GTUNABLE;
+ ds.id = ETHTOOL_PHY_DOWNSHIFT;
+ ds.type_id = ETHTOOL_TUNABLE_U8;
+ ds.len = 1;
+ ds.data[0] = &count;
+ err = send_ioctl(ctx, &ds);
+ if (err < 0) {
+ perror("Cannot Get PHY downshift count");
+ return 87;
+ }
+ count = *((u8 *)&ds.data[0]);
+ if (count)
+ fprintf(stdout, "Downshift count: %d\n", count);
+ else
+ fprintf(stdout, "Downshift disabled\n");
+ }
+
+ return err;
+}
+
+static int parse_named_bool(struct cmd_context *ctx, const char *name, u8 *on)
+{
+ if (ctx->argc < 2)
+ return 0;
+
+ if (strcmp(*ctx->argp, name))
+ return 0;
+
+ if (!strcmp(*(ctx->argp + 1), "on")) {
+ *on = 1;
+ } else if (!strcmp(*(ctx->argp + 1), "off")) {
+ *on = 0;
+ } else {
+ fprintf(stderr, "Invalid boolean\n");
+ exit_bad_args();
+ }
+
+ ctx->argc -= 2;
+ ctx->argp += 2;
+
+ return 1;
+}
+
+static int parse_named_u8(struct cmd_context *ctx, const char *name, u8 *val)
+{
+ if (ctx->argc < 2)
+ return 0;
+
+ if (strcmp(*ctx->argp, name))
+ return 0;
+
+ *val = get_uint_range(*(ctx->argp + 1), 0, 0xff);
+
+ ctx->argc -= 2;
+ ctx->argp += 2;
+
+ return 1;
+}
+
+static int do_set_phy_tunable(struct cmd_context *ctx)
+{
+ int err = 0;
+ u8 ds_cnt = DOWNSHIFT_DEV_DEFAULT_COUNT;
+ u8 ds_changed = 0, ds_has_cnt = 0, ds_enable = 0;
+
+ if (ctx->argc == 0)
+ exit_bad_args();
+
+ /* Parse arguments */
+ while (ctx->argc) {
+ if (parse_named_bool(ctx, "downshift", &ds_enable)) {
+ ds_changed = 1;
+ ds_has_cnt = parse_named_u8(ctx, "count", &ds_cnt);
+ } else {
+ exit_bad_args();
+ }
+ }
+
+ /* Validate parameters */
+ if (ds_changed) {
+ if (!ds_enable && ds_has_cnt) {
+ fprintf(stderr, "'count' may not be set when downshift "
+ "is off.\n");
+ exit_bad_args();
+ }
+
+ if (ds_enable && ds_has_cnt && ds_cnt == 0) {
+ fprintf(stderr, "'count' may not be zero.\n");
+ exit_bad_args();
+ }
+
+ if (!ds_enable)
+ ds_cnt = DOWNSHIFT_DEV_DISABLE;
+ }
+
+ /* Do it */
+ if (ds_changed) {
+ struct ethtool_tunable ds;
+ u8 count;
+
+ ds.cmd = ETHTOOL_PHY_STUNABLE;
+ ds.id = ETHTOOL_PHY_DOWNSHIFT;
+ ds.type_id = ETHTOOL_TUNABLE_U8;
+ ds.len = 1;
+ ds.data[0] = &count;
+ *((u8 *)&ds.data[0]) = ds_cnt;
+ err = send_ioctl(ctx, &ds);
+ if (err < 0) {
+ perror("Cannot Set PHY downshift count");
+ err = 87;
+ }
+ }
+
+ return err;
+}
+
#ifndef TEST_ETHTOOL
int send_ioctl(struct cmd_context *ctx, void *cmd)
{
@@ -4681,6 +4821,10 @@ static const struct option {
" [ advertise %x ]\n"
" [ tx-lpi on|off ]\n"
" [ tx-timer %d ]\n"},
+ { "--set-phy-tunable", 1, do_set_phy_tunable, "Set PHY tunable",
+ " [ downshift on|off [count N] ]\n"},
+ { "--get-phy-tunable", 1, do_get_phy_tunable, "Get PHY tunable",
+ " [ downshift ]\n"},
{ "-h|--help", 0, show_usage, "Show this help" },
{ "--version", 0, do_version, "Show version number" },
{}
--
2.7.3
Powered by blists - more mailing lists